Cisco Webex 840 User manual

Webex Wireless Phone 840 and 840S quick reference guide
March 2022
Copyright © 2022 Cisco Systems, Inc. All rights reserved.
Your phone
1. Power button
2. Barcode scanner (840S only) and
programmable button (by default Emergency)
3. Receive speaker and front camera
4. Programmable button (by default PTT)
5. Microphone
6. Headset jack, USB charging port, and speaker
7. Programmable buttons (by default: Volume up,
Volume down, and the lower button is Scanner
(for 840S) or No action (for 840))
8. Rear camera, flash lens/torch, and rear
microphone
9. Charger contacts, battery latch, and
rechargeable battery pack
Turn on your phone
Press and hold the Power button until the phone
vibrates and the rst screen displays.
Unlock your phone
1. If the phone screen is in sleep mode, briefly
press the Power button.
2. Swipe up on the Lock screen.
3. Enter your PIN or password and tap Enter .
Lock your phone
Briey press the Power button.
Turn off your phone
1. Press and hold the Power button.
2. Tap Power off .
Make a call from the keypad
1. Access the Cisco Phone app.
2. (Optional) If your phone has multiple lines,
access the desired line.
3. Tap Keypad .
4. Enter a phone number.
5. Tap Answer/Call .
Answer a call
Swipe Answer/Call to the right.
Mute your microphone
1. From the active call screen, tap Mute .
2. To unmute your microphone, tap Mute
again.
Change your audio option
1. From the active call screen, tap Audio
options .
2. Select the desired available audio option:
Headphones , Speaker , Bluetooth ,
or Phone .
Hold a call
1. From the active call screen, tap Hold .
2. To return to the held call, tap Hold .
Transfer a call to another person
1. From the active call screen, tap More .
2. Tap Transfer to number .
3. Enter the number to call or select an entry
from your recent Calls .
4. Tap Transfer .

Webex Wireless Phone 840 and 840S quick reference guide
March 2022
Copyright © 2022 Cisco Systems, Inc. All rights reserved.
Add a call to create a conference
1. From the active call screen, tap More .
2. Tap Add call.
3. Enter a number to call.
4. Tap Add .
5. After the person answers, tap More .
6. Tap Merge .
7. Tap the held call that you want to join into the
conference.
8. Tap Merge.
9. Repeat steps 1-8 for each additional
participant.
Access other apps during an active call
1. To leave the active call screen, tap Home .
Back , or Recent apps .
2. Use the desired app.
3. To return to the active call screen, swipe
down on the status bar and tap the active call
notification.
View your recent or missed calls
1. Access the Cisco Phone app.
2. Tap Calls .
3. Tap Recents or Missed.
Add a new local contact
1. Access the Cisco Phone app.
2. Tap Contacts .
3. Tap Add .
4. Enter the contact information.
5. Tap Save.
Access voicemail
1. Choose one of the following:
xSwipe down on the status bar and tap the
Voicemail waiting notification.
xIf configured, tap 1on the Cisco Phone
app Keypad to dial the voicemail
retrieval number.
2. Follow the prompts to retrieve the voicemail.
OR: If visual voicemail is congured—From the
Cisco Phone app, tap Voicemail .
Forward calls from your phone
1. Access the Cisco Phone app.
2. Based on your phone's software version, tap
the Overflow or Drawer menu.
3. Select Features > Call forward.
4. Swipe the Enable call forward slider to the
right .
5. Enter the number to receive your calls, or
select an entry from your Contacts list.
6. Tap Save.
Turn off call forward from your phone
1. Access the Cisco Phone app.
2. Based on your phone's software version,
tap the Overflow or Drawer menu.
3. Select Features > Call forward.
4. Swipe the Enable call forward slider to the
left .
5. Tap Save.
(If configured) Send a push to talk (PTT)
broadcast
1. If your phone is password protected, unlock
the phone.
2. If you are not on the desired channel,
access the PTT app and tap the desired
channel from the Channels tab or click
a leg of a conversation from the Activity
tab.
3. Press and hold the programmed PTT
button.
4. After you hear a beep, hold the phone
microphone approximately two inches (five
centimeters) from your mouth and speak.
5. Release the PTT button.
(If configured) Activate the panic alarm
Press the programmed red Emergency button
on the top right of the phone, as directed.

Webex Wireless Phone 840 and 840S quick reference guide
March 2022
Copyright © 2022 Cisco Systems, Inc. All rights reserved.
(For 840S only) Scan a barcode
1. If your phone is password protected, unlock
the phone.
2. Point the barcode reader 1 to 18 inches (2.5
to 46 centimeters) from the barcode that you
want to scan.
3. Press and hold the programmed Scanner
button with the light shining across the entire
barcode symbol until the light turns off and
you hear a beep.
Adjust the volume during a call
Press the programmed Volume up and Volume
down buttons to adjust the volume while on a call.
Access the quick settings
1. Swipe down from the status bar at the top of
the screen.
2. If your phone has the smart launcher with a
single app, tap Quick Settings.
3. If available, swipe down again to display more
settings and options.
OR: If your phone has the smart launcher with
multiple apps, tap the Overow menu.
(If available) Adjust the phone ringer
volume
1. Access the Settings app.
2. Tap Sound.
3. Swipe the Ring volume slider to adjust the ring
volume.
(If available) Pair a Bluetooth® device
1. Access the Settings app.
2. Select Connected devices > Connection
Preferences > Bluetooth.
3. Tap Pair new device.
4. From the list of Available devices, select the
desired device and tap Pair.
5. If required, enter the device pin code.
(If available) Adjust the screen brightness
1. Access the Settings app.
2. Tap Display.
3. Tap Brightness level.
4. Swipe the slider to adjust the screen
brightness.
5. If desired, turn on Adaptive brightness to
automatically adjust the screen brightness
based on the environment.
(If available) Change the screen display
timeout
1. Access the Settings app.
2. Tap Display.
3. Tap Advanced.
4. Tap Screen timeout.
5. Select the desired amount of time.
Cisco and the Cisco logo are trademarks or registered trademarks of
Cisco and/or its affiliates in the U.S. and other countries. To view a list
of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.
Third-party trademarks mentioned are the property of their respective
owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company. (1110R)
(If available) Change the font size and
display size
1. Access the Settings app.
2. Tap Display.
3. Tap Advanced.
4. Tap Font size or Display size.
5. Swipe the Font size or Display size sliders to
adjust the font size or display size.
User guide
For more information, see the full User guide.