Cisco OL-11757-01 Instruction Manual

Corporate Headquarters:
© 2006 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Supplement and Release Notes for
CiscoWorks Security Information
Management Solution (SIMS) 3.4.1
OL-11757-01
Revised October 31, 2006
This document provides Cisco-specific information to supplement the
CiscoWorks Security Information Management Solution (SIMS) 3.4.1
documentation, developed by netForensics, Inc. This document contains:
•Acknowledgements, page 2
•Important Information About This Update, page 2
•Product Availability Change Notice, page 6
•Documentation Roadmap, page 6
•Obtaining Documentation, page 11
•Documentation Feedback, page 13
•Cisco Product Security Overview, page 13
•Product Alerts and Field Notices, page 15
•Obtaining Technical Assistance, page 15

Acknowledgements
2
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
•Obtaining Additional Publications and Information, page 18
•CiscoWorks SIMS Licensing and Registration, page 19
Acknowledgements
CiscoWorks SIMS is the netForensics, Inc., Security Information Management
Solution. This product is offered to Cisco Systems customers in cooperation with
netForensics, Inc.
Important Information About This Update
Caution If you use a CiscoWorks SIMS version earlier than 3.4, you must upgrade to
version 3.4 before you try to install the CiscoWorks SIMS 3.4.1 update. You must
not apply this update to any CiscoWorks SIMS version earlier than 3.4. If you do,
your server might become unstable or unusable.
Topics in this section describe how this release differs from earlier releases:
•Updated Documents, page 2
•Agents in This Update, page 3
Updated Documents
The following netForensics guides are updated for the CiscoWorks SIMS 3.4.1
release. For information about where you can obtain them, see
nFX_OSP3.4.1ReleaseNotes.Cisco.pdf:
•nFX OSP Unix and Windows Installation Guide
•nFX OSP Administration and Configuration Guide
•nFX OSP User’s Guide

3
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
Important Information About This Update
•nFX OSP Reports Guide
•nFX OSP Vulnerability Correlation Administration Guide
See Documentation Roadmap, page 6 for detailed information.
Agents in This Update
This update includes new and changed agents. To learn more, see these topics:
•Changed Terminology, page 3
•New and Replaced Agents, page 3
•Updated Agents, page 4
•Agent Installation Notes, page 5
Changed Terminology
The 3.3 Consolidated Agent from CiscoWorks SIMS 3.3 has been renamed. Its
new name is Agent Installation (October 2006).
New and Replaced Agents
Agent Installation (October 2006) includes the following new agents:
•nF Agent for AirDefense Enterprise Agent
•nF Agent for Fortinet FortiGate
•nF Agent for Microsoft ISA Server
•nF Agent for Microsoft SQL Server
•nF Agent for RippleTech Informant
•nF Agent for Unix OS
•nF Agent for Websense Enterprise

Important Information About This Update
4
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
Note nF Agent for Unix OS replaces the following two agents:
•nF Agent for HP Unix
•nF Agent for IBM AIX OS
Updated Agents
Agent Installation (October 2006) includes updates to the following agents:
•nF Agent for Sidewinder
•nF Agent for Dragon Sensor
•nF Agent for Sourcefire EStreamer
•nF Agent for Real Secure ISS Site Protector
•nF Agent for Real Secure Desktop Protector
•nF Agent for Arbor Peakflow X
•nF Agent for Cisco Secure IPS
•nF Agent for Symantec AntiVirus
•nF Agent for Foundstone Scanner
•nF Agent for Syslog File Agent (syslog)
•nF Agent for Syslog File Agent (Java)

5
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
Important Information About This Update
Agent Installation Notes
The version of CiscoWorks SIMS that you have determines whether, how, and
when you use Agent Installation (October 2006). For detailed information, see
nFAgentReleaseNotes(October2006).Cisco.pdf.
Version Notes
3.4.1 You already have the software that this update contains.
3.4 You must apply Point Update 58405 from the Agent Installation (October 2006) CD-ROM
before you install any of the agents included in this release:
•nFSIM-3.4-PNTUPD-58405.tar.gz is in the Prerequisite Point Updates/3.4
Prerequisite subdirectory.
•For detailed installation instructions, see Point Update 58405 for CiscoWorks SIMS
3.4 Release Notes, in the Documents subdirectory.
3.3.1 You must apply Point Update 58404 from the Agent Installation (October 2006) CD-ROM
before you install any of the agents included in this release:
•nFSIM-3.3.1-PNTUPD-58404.tar.gz is in the Prerequisite Point Updates/3.3.1
Prerequisite subdirectory.
•For detailed installation instructions, see Point Update 58404 for CiscoWorks SIMS
3.3.1 Release Notes, in the Documents subdirectory.
3.3
or earlier You must complete this procedure before you install any of the agents included in
this release:
1. Upgrade to CiscoWorks SIMS 3.3.1.
For detailed upgrade instructions, see either:
•nFX OSP Version 3.3.1 Release Notes.
or
•nFX OSP Version 3.3.1 Migration Update Release Notes.
2. From the Agent Installation (October 2006) CD-ROM, apply Point Update 58404:
•nFSIM-3.3.1-PNTUPD-58404.tar.gz is in the Prerequisite Point Updates/3.3.1
Prerequisite subdirectory.
•For detailed installation instructions, see Point Update 58404 for CiscoWorks
SIMS 3.3.1 Release Notes, in the Documents subdirectory.

Product Availability Change Notice
6
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
Product Availability Change Notice
Note • Although certain earlier releases of CiscoWorks SIMS provided a Starter Kit
option, CiscoWorks SIMS 3.4.1 does not. Instead, you can purchase the
CiscoWorks SIMS Enterprise Lite software, which provides additional
software components. See Additional License Restrictions, page 20.
•Registered CiscoWorks SIMS Starter Kit customers will receive a Starter Kit
upgrade to CiscoWorks SIMS 3.4.1. See Additional License Restrictions,
page 20.
•Registered CiscoWorks SIMS Starter Kit users can follow an upgrade path to
either CiscoWorks SIMS Enterprise Pack or CiscoWorks SIMS Enterprise
Lite. See Additional License Restrictions, page 20.
Documentation Roadmap
To install and use CiscoWorks SIMS effectively, read the core documents
described in Table 1 on page 7 in the order listed.
Note • We might update this document after its original publication. Therefore, you
should also review it on Cisco.com for any updates.
•To view Adobe Portable Document Format (PDF) files, Adobe Acrobat
Reader 4.0 or later is required.

7
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
Documentation Roadmap
Table 1 Sequence to Read Core CiscoWorks SIMS Documentation
PDF Filename Document Title;
Description and Intended Audience;
Part Number
Written By netForensics Written By Cisco Systems PDF in the CiscoWorks SIMS ISO Image on Cisco.com HTML and PDF on Cisco.com
1. nfsupp341.pdf
(this document) Supplement and Release Notes for CiscoWorks Security Information
Management Solution 3.4.1
All users; describes Cisco-specific registration, licensing, product,
features, known problems, and other information to supplement the
documentation written by netForensics, Inc.
OL-11757-01 X X
2. nFX_OSP3.4.1Release
Notes.Cisco.pdf CiscoWorks SIMS Version 3.4.1 Release Notes
All users; describes system requirements, supported platforms, product
installation, product feature highlights, and known issues.
OL-11535-01 X X
3. nFAgentReleaseNotes
(October2006).Cisco.pdf CiscoWorks SIMS Agent Installation (October 2006) Release Notes
All users; describes required configuration tasks for the Agent
Installation (October 2006) release.
OL-11579-01 X X
4. nFX_OSP_HCE_Relea
seNotes.Cisco.pdf nFX OSP Historical Correlation Engine Release Notes
All users; describes system requirements, supported platforms, product
installation, product feature highlights, and known issues.
OL-10759-01 X X

Documentation Roadmap
8
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
5. nFX_OSP_DeplPlanIm
plGuide.Cisco.pdf nFX OSP Deployment Planning and Implementation Guide
Version 3.4
All users; describes CiscoWorks SIMS (nFX OSP) architecture,
components, use cases, options, and requirements, and provides case
studies.
OL-10758-01 X X
6. nFX_OSP_InstallGuide
.Cisco.pdf nFX OSP Unix and Windows Installation Guide
Red Hat Enterprise Linux AS 2.1, AS 3.0
Solaris 8, Solaris 9 (SPARC)
Windows 2000 Server and Advanced Server
Windows 2003
Version 3.4.1
October 2006
Network and system administrators; provides details about the
preparation for and installation of CiscoWorks SIMS (nFX OSP).
OL-11681-01 X X
7. nFX_OSP_Administrati
onGuide.Cisco.pdf nFX OSP Administration and Configuration Guide
Version 3.4.1
All users; describes the user interface, architecture and concepts,
prerequisites, configuration, user settings, component and
administrative options, database management and performance,
reports, device message formats, diagnostics, maintenance, rollback
and fault tolerance.
OL-11531-01 X X
Table 1 Sequence to Read Core CiscoWorks SIMS Documentation (continued)
PDF Filename Document Title;
Description and Intended Audience;
Part Number
Written By netForensics Written By Cisco Systems PDF in the CiscoWorks SIMS ISO Image on Cisco.com HTML and PDF on Cisco.com

9
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
Documentation Roadmap
8. nFX_OSP_UsersGuide.
Cisco.pdf nFX OSP User’s Guide
Version 3.4.1
Network security professionals and general users; describes how to use
CiscoWorks SIMS (nFX OSP) to view and analyze security information
in a computer network.
OL-11532-01 X X
9. nFX_OSP_AdvancedU
sersGuide.Cisco.pdf nFX OSP Advanced User’s Guide
Version 3.4
Network security professionals, system and network administrators;
describes security monitoring strategy, best practices, the need
for—and importance of—computer forensics, and the advantages
derived from incident response.
OL-10757-01 X X
10. nFReportsguide.Cisco.
pdf nFX OSP Reports Guide
Version 3.4.1
Network security professionals and system administrators; provides
details about the reporting tools.
OL-11533-01 X X
11. nFX_OSP_IRMAdmin
guide.Cisco.pdf nFX OSP Incident Resolution Management Administration Guide
Version 3.4
All users.
OL-10760-01 X X
Table 1 Sequence to Read Core CiscoWorks SIMS Documentation (continued)
PDF Filename Document Title;
Description and Intended Audience;
Part Number
Written By netForensics Written By Cisco Systems PDF in the CiscoWorks SIMS ISO Image on Cisco.com HTML and PDF on Cisco.com

Documentation Roadmap
10
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
12. nFX_OSP_RBC_Admi
nistrationGuide.Cisco.p
df
nFX OSP Rule Based Correlation Administration Guide
Version 3.4
All users.
OL-10761-01 X X
13. nFX_OSP_
RBC_LoggingTuningG
uide.cisco.pdf
Logging Requirements and RBC Tuning Guide
Version 3.4
Network security professionals, system and network
administrators; provides details about tuning RBC engine rules in
CiscoWorks SIMS (nFX OSP).
OL-10756-01 X X
14. nFX_OSP_VCAdminist
rationGuide.Cisco.pdf nFX OSP Vulnerability Correlation Administration Guide
Version 3.4.1
All users.
OL-11534-01 X X
15. nFX_OSP_SecureCertif
icateManagerGuide.Cis
co.pdf
nFX OSP Secure Certificate Manager & SSL Setup and Administration Guide
Version 3.4
Network security professionals and general users; provides details
about using Secure Certificate Manager to generate certificates.
OL-10974-01 X X
Table 1 Sequence to Read Core CiscoWorks SIMS Documentation (continued)
PDF Filename Document Title;
Description and Intended Audience;
Part Number
Written By netForensics Written By Cisco Systems PDF in the CiscoWorks SIMS ISO Image on Cisco.com HTML and PDF on Cisco.com

11
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
Obtaining Documentation
In addition, online help written by netForensics is integrated into the CiscoWorks
SIMS (nFX OSP) product to provide all users with context-sensitive,
task-oriented assistance.
Obtaining Documentation
Cisco documentation and additional literature are available on Cisco.com. This
section explains the product documentation resources that Cisco offers.
16. nFX_OSP_QuickConne
ct_UserGuide.Cisco.pd
f
nFX OSP Quick Connect User Guide
Version 3.4
Network security professionals and general users; provides information
about Quick Connect features, architecture and configuration, describes
the user interface, and provides step-by-step procedures for important
tasks.
OL-10978-01 X X
17. nFX_OSP_SecurityPort
al.Cisco.pdf nFX OSP Security Portal Server User’s Guide
Version 3.4
Network administrators; provides details about logging into and out of
SPS, describes the SPS interface, tools, and controls, and provides
examples of scheduled reports that you can view.
OL-10979-01 X X
Table 1 Sequence to Read Core CiscoWorks SIMS Documentation (continued)
PDF Filename Document Title;
Description and Intended Audience;
Part Number
Written By netForensics Written By Cisco Systems PDF in the CiscoWorks SIMS ISO Image on Cisco.com HTML and PDF on Cisco.com

Obtaining Documentation
12
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
Note Cisco Systems does not sell documentation that netForensics prepares for users of
nFX OSP products, also known collectively as CiscoWorks SIMS. For
information on where and how a Cisco customer can obtain netForensics
documentation for CiscoWorks SIMS 3.4, see Table 1 on page 7.
Cisco.com
You can access the most current Cisco documentation at this URL:
http://www.cisco.com/techsupport
You can access the Cisco website at this URL:
http://www.cisco.com
You can access international Cisco websites at this URL:
http://www.cisco.com/public/countries_languages.shtml
Product Documentation DVD
The Product Documentation DVD is a library of technical product documentation
on a portable medium. The DVD enables you to access installation, configuration,
and command guides for Cisco hardware and software products. With the DVD,
you have access to the HTML documentation and some of the PDF files found on
the Cisco website at this URL:
http://www.cisco.com/univercd/home/home.htm
The Product Documentation DVD is created and released regularly. DVDs are
available singly or by subscription. Registered Cisco.com users can order a
Product Documentation DVD (product number DOC-DOCDVD= or
DOC-DOCDVD=SUB) from Cisco Marketplace at the Product Documentation
Store at this URL:
http://www.cisco.com/go/marketplace/docstore

13
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
Documentation Feedback
Ordering Documentation
You must be a registered Cisco.com user to access Cisco Marketplace. Registered
users may order Cisco documentation at the Product Documentation Store at this
URL:
http://www.cisco.com/go/marketplace/docstore
If you do not have a user ID or password, you can register at this URL:
http://tools.cisco.com/RPF/register/register.do
Documentation Feedback
You can provide feedback about Cisco technical documentation on the
Cisco Technical Support & Documentation site area by entering your comments
in the feedback form available in every online document.
Cisco Product Security Overview
Cisco provides a free online Security Vulnerability Policy portal at this URL:
http://www.cisco.com/en/US/products/products_security_vulnerability_policy.ht
ml
From this site, you will find information about how to do the following:
•Report security vulnerabilities in Cisco products
•Obtain assistance with security incidents that involve Cisco products
•Register to receive security information from Cisco
A current list of security advisories, security notices, and security responses for
Cisco products is available at this URL:
http://www.cisco.com/go/psirt

Cisco Product Security Overview
14
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
To see security advisories, security notices, and security responses as they are
updated in real time, you can subscribe to the Product Security Incident Response
Team Really Simple Syndication (PSIRT RSS) feed. Information about how to
subscribe to the PSIRT RSS feed is found at this URL:
http://www.cisco.com/en/US/products/products_psirt_rss_feed.html
Reporting Security Problems in Cisco Products
Cisco is committed to delivering secure products. We test our products internally
before we release them, and we strive to correct all vulnerabilities quickly. If you
think that you have identified a vulnerability in a Cisco product, contact PSIRT:
•For emergencies only—[email protected]
An emergency is either a condition in which a system is under active attack
or a condition for which a severe and urgent security vulnerability should be
reported. All other conditions are considered nonemergencies.
•For nonemergencies—[email protected]
In an emergency, you can also reach PSIRT by telephone:
•1 877 228-7302
•1 408 525-6532
Tip We encourage you to use Pretty Good Privacy (PGP) or a compatible product (for
example, GnuPG) to encrypt any sensitive information that you send to Cisco.
PSIRT can work with information that has been encrypted with PGP versions 2.x
through 9.x.
Never use a revoked encryption key or an expired encryption key. The correct
public key to use in your correspondence with PSIRT is the one linked in the
Contact Summary section of the Security Vulnerability Policy page at this URL:
http://www.cisco.com/en/US/products/products_security_vulnerability_policy.ht
ml
The link on this page has the current PGP key ID in use.

15
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
Product Alerts and Field Notices
If you do not have or use PGP, contact PSIRT to find other means of encrypting
the data before sending any sensitive material.
Product Alerts and Field Notices
Modifications to or updates about Cisco products are announced in Cisco Product
Alerts and Cisco Field Notices. You can receive Cisco Product Alerts and Cisco
Field Notices by using the Product Alert Tool on Cisco.com. This tool enables you
to create a profile and choose those products for which you want to receive
information.
To access the Product Alert Tool, you must be a registered Cisco.com user. (To
register as a Cisco.com user, go to this URL:
http://tools.cisco.com/RPF/register/register.do) Registered users can access the
tool at this URL:
http://tools.cisco.com/Support/PAT/do/ViewMyProfiles.do?local=en
Obtaining Technical Assistance
Cisco Technical Support provides 24-hour-a-day award-winning technical
assistance. The Cisco Technical Support & Documentation website on Cisco.com
features extensive online support resources. In addition, if you have a valid
Cisco service contract, Cisco Technical Assistance Center (TAC) engineers
provide telephone support. If you do not have a valid Cisco service contract,
contact your reseller.
Cisco Technical Support & Documentation Website
The Cisco Technical Support & Documentation website provides online
documents and tools for troubleshooting and resolving technical issues with
Cisco products and technologies. The website is available 24 hours a day at
this URL:
http://www.cisco.com/techsupport

Obtaining Technical Assistance
16
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
Access to all tools on the Cisco Technical Support & Documentation website
requires a Cisco.com user ID and password. If you have a valid service contract
but do not have a user ID or password, you can register at this URL:
http://tools.cisco.com/RPF/register/register.do
Note Use the Cisco Product Identification Tool to locate your product serial number
before submitting a request for service online or by phone. You can access this
tool from the Cisco Technical Support & Documentation website by clicking the
Tools & Resources link, clicking the All Tools (A-Z) tab, and then choosing
Cisco Product Identification Tool from the alphabetical list. This tool offers
three search options: by product ID or model name; by tree view; or, for certain
products, by copying and pasting show command output. Search results show an
illustration of your product with the serial number label location highlighted.
Locate the serial number label on your product and record the information before
placing a service call.
Tip Displaying and Searching on Cisco.com
If you suspect that the browser is not refreshing a web page, force the browser to
update the web page by holding down the Ctrl key while pressing F5.
To find technical information, narrow your search to look in technical
documentation, not the entire Cisco.com website. On the Cisco.com home page,
click the Advanced Search link under the Search box and then click the
Technical Support & Documentation radio button.
To provide feedback about the Cisco.com website or a particular technical
document, click Contacts & Feedback at the top of any Cisco.com web page.
Submitting a Service Request
Using the online TAC Service Request Tool is the fastest way to open S3 and S4
service requests. (S3 and S4 service requests are those in which your network is
minimally impaired or for which you require product information.) After you
describe your situation, the TAC Service Request Tool provides recommended

17
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
Obtaining Technical Assistance
solutions. If your issue is not resolved using the recommended resources, your
service request is assigned to a Cisco engineer. The TAC Service Request Tool is
located at this URL:
http://www.cisco.com/techsupport/servicerequest
For S1 or S2 service requests, or if you do not have Internet access, contact the
Cisco TAC by telephone. (S1 or S2 service requests are those in which your
production network is down or severely degraded.) Cisco engineers are assigned
immediately to S1 and S2 service requests to help keep your business operations
running smoothly.
To open a service request by telephone, use one of the following numbers:
Asia-Pacific: [phone]
Australia: 1 800 805 227
EMEA: [phone]
USA: 1 800 553 2447
For a complete list of Cisco TAC contacts, go to this URL:
http://www.cisco.com/techsupport/contacts
Definitions of Service Request Severity
To ensure that all service requests are reported in a standard format, Cisco has
established severity definitions.
Severity 1 (S1)—An existing network is “down” or there is a critical impact to
your business operations. You and Cisco will commit all necessary resources
around the clock to resolve the situation.
Severity 2 (S2)—Operation of an existing network is severely degraded, or
significant aspects of your business operations are negatively affected by
inadequate performance of Cisco products. You and Cisco will commit full-time
resources during normal business hours to resolve the situation.
Severity 3 (S3)—Operational performance of the network is impaired while most
business operations remain functional. You and Cisco will commit resources
during normal business hours to restore service to satisfactory levels.
Severity 4 (S4)—You require information or assistance with Cisco product
capabilities, installation, or configuration. There is little or no effect on your
business operations.

Obtaining Additional Publications and Information
18
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
Obtaining Additional Publications and Information
Information about Cisco products, technologies, and network solutions is
available from various online and printed sources.
•The Cisco Online Subscription Center is the website where you can sign up
for a variety of Cisco e-mail newsletters and other communications. Create a
profile and then select the subscriptions that you would like to receive. To
visit the Cisco Online Subscription Center, go to this URL:
http://www.cisco.com/offer/subscribe
•The Cisco Product Quick Reference Guide is a handy, compact reference tool
that includes brief product overviews, key features, sample part numbers, and
abbreviated technical specifications for many Cisco products that are sold
through channel partners. It is updated twice a year and includes the latest
Cisco channel product offerings. To order and find out more about the
Cisco Product Quick Reference Guide, go to this URL:
http://www.cisco.com/go/guide
•Cisco Marketplace provides a variety of Cisco books, reference guides,
documentation, and logo merchandise. Visit Cisco Marketplace, the company
store, at this URL:
http://www.cisco.com/go/marketplace/
•Cisco Press publishes a wide range of general networking, training, and
certification titles. Both new and experienced users will benefit from these
publications. For current Cisco Press titles and other information, go to
Cisco Press at this URL:
http://www.ciscopress.com
•Internet Protocol Journal is a quarterly journal published by Cisco Systems
for engineering professionals involved in designing, developing, and
operating public and private internets and intranets. You can access the
Internet Protocol Journal at this URL:
http://www.cisco.com/ipj
•Networking products offered by Cisco Systems, as well as customer support
services, can be obtained at this URL:
http://www.cisco.com/en/US/products/index.html

19
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
CiscoWorks SIMS Licensing and Registration
•Networking Professionals Connection is an interactive website where
networking professionals share questions, suggestions, and information
about networking products and technologies with Cisco experts and other
networking professionals. Join a discussion at this URL:
http://www.cisco.com/discuss/networking
•“What’s New in Cisco Documentation” is an online publication that provides
information about the latest documentation releases for Cisco products.
Updated monthly, this online publication is organized by product category to
direct you quickly to the documentation for your products. You can view the
latest release of “What’s New in Cisco Documentation” at this URL:
http://www.cisco.com/univercd/cc/td/doc/abtunicd/136957.htm
•World-class networking training is available from Cisco. You can view
current offerings at this URL:
http://www.cisco.com/en/US/learning/index.html
CiscoWorks SIMS Licensing and Registration
This section contains the following:
•Supplemental End-User License Agreement, page 20
•Registration and Licensing Notes for All CiscoWorks SIMS Components and
Add-On Kits, page 24
•Getting Help with Licensing, page 24
•End User License, page 25

CiscoWorks SIMS Licensing and Registration
20
Supplement and Release Notes for CiscoWorks Security Information Management Solution (SIMS) 3.4.1
OL-11757-01
Supplemental End-User License Agreement
SUPPLEMENTALLICENSEAGREEMENTFORCISCOSYSTEMSSECURITYMANAGEMENT
SOFTWARE: CiscoWorks Security Information Management Solution Product Line
IMPORTANT—READ CAREFULLY: This Supplemental License Agreement
(“SLA”) contains additional limitations on the license to the Software provided to
Customer under the Software License Agreement between Customer and Cisco.
Capitalized terms used in this SLA and not otherwise defined herein shall have
the meanings assigned to them in the Software License Agreement. To the extent
that there is a conflict among any of these terms and conditions applicable to the
Software, the terms and conditions in this SLA shall take precedence.
By installing, downloading, accessing or otherwise using the Software, Customer
agrees to be bound by the terms of this SLA. If Customer does not agree to the
terms of this SLA, Customer may not install, download, or otherwise use the
Software. When used below, the term “server” refers to central processor unit.
1. ADDITIONAL LICENSE RESTRICTIONS.
•Installation and Use. The Software and all of its related components are
provided to Customer solely to install, update, supplement, or replace
existing functionality of the applicable Security Management Software
product. Customer may install and use the following Software components
subject to the following restrictions:
– CiscoWorks Security Information Management Solution (SIM)
Starter Kit Software Upgrade:
•Master Engine Server: Customer may upgrade on one (1) server, per
license certificate, in the Customer’s network management environment.
•Distributed Engine Server: Customer may upgrade on one (1) server, per
license certificate, in the Customer’s network management environment.
•Database: Customer may upgrade one (1) instance of the Oracle standard
database on one (1) server with five (5) Oracle human users and up to
four (4) CPUs per license certificate, in the Customer’s network
management environment. Additional Oracle human user licenses are
purchased separately.