Cisco Catalyst 3030 Installation manual

Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: [phone]
800 553-NETS (6387)
Fax: [phone]
Cisco Catalyst Blade Switch 3030
Command Reference
Cisco IOS Release 12.2(25)SEE
March 2006
Customer Order Number: DOC-7817262=
Text Part Number: 78-17262-01

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL
STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT
SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE
OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public
domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH
ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT
LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF
DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,
WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO
OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the
document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
Cisco Catalyst Blade Switch 3030 Command Reference
Copyright © 2006 Cisco Systems, Inc. All rights reserved.
CCSP, CCVP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and
iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, Cisco, the Cisco Certified
Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Enterprise/Solver, EtherChannel, EtherFast,
EtherSwitch, Fast Step, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, LightStream,
Linksys, MeetingPlace, MGX, the Networkers logo, Networking Academy, Network Registrar, Pa cke t, PIX, Post-Routing, Pre-Routing, ProConnect, RateMUX, ScriptShare,
SlideCast, SMARTnet, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States
and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship
between Cisco and any other company. (0601R)

iii
Cisco Catalyst Blade Switch 3030 Command Reference
78-17262-01
CONTENTS
Preface xv
Audience xv
Purpose xv
Conventions xv
Related Publications xvi
Obtaining Documentation xvii
Cisco.com xvii
Product Documentation DVD xvii
Ordering Documentation xvii
Documentation Feedback xvii
Cisco Product Security Overview xviii
Reporting Security Problems in Cisco Products xviii
Obtaining Technical Assistance xix
Cisco Technical Support & Documentation Website xix
Submitting a Service Request xx
Definitions of Service Request Severity xx
Obtaining Additional Publications and Information xxi
CHAPTER 1Using the Command-Line Interface 1-1
CLI Command Modes 1-1
User EXEC Mode 1-2
Privileged EXEC Mode 1-3
Global Configuration Mode 1-3
Interface Configuration Mode 1-4
config-vlan Mode 1-4
VLAN Configuration Mode 1-4
Line Configuration Mode 1-5
CHAPTER 2Cisco Catalyst Blade Switch 3030
Cisco IOS Commands 2-1
aaa accounting dot1x 2-1
aaa authentication dot1x 2-3
aaa authorization network 2-5

Contents
iv
Cisco Catalyst Blade Switch 3030 Command Reference
78-17262-01
action 2-6
archive download-sw 2-8
archive tar 2-11
archive upload-sw 2-14
auto qos voip 2-16
boot boothlpr 2-20
boot config-file 2-21
boot enable-break 2-22
boot helper 2-23
boot helper-config-file 2-24
boot manual 2-25
boot private-config-file 2-26
boot system 2-27
channel-group 2-28
channel-protocol 2-31
class 2-32
class-map 2-34
clear dot1x 2-36
clear eap 2-37
clear lacp 2-38
clear mac address-table 2-39
clear mac address-table move update 2-41
clear pagp 2-42
clear port-security 2-43
clear spanning-tree counters 2-45
clear spanning-tree detected-protocols 2-46
clear vmps statistics 2-47
clear vtp counters 2-48
. define interface-range 2-49
delete 2-51
deny (MAC access-list configuration) 2-52
dot1x 2-55
dot1x auth-fail max-attempts 2-57
dot1x auth-fail vlan 2-59
dot1x control-direction 2-61

Contents
v
Cisco Catalyst Blade Switch 3030 Command Reference
78-17262-01
dot1x critical (global configuration) 2-63
dot1x critical (interface configuration) 2-65
dot1x default 2-67
dot1x guest-vlan 2-68
dot1x host-mode 2-70
dot1x initialize 2-71
dot1x mac-auth-bypass 2-72
dot1x max-reauth-req 2-74
dot1x max-req 2-76
dot1x pae 2-77
dot1x port-control 2-78
dot1x re-authenticate 2-80
dot1x reauthentication 2-81
dot1x timeout 2-82
duplex 2-85
errdisable detect cause 2-87
errdisable recovery 2-89
exception crashinfo 2-91
flowcontrol 2-92
interface port-channel 2-94
interface range 2-96
interface vlan 2-98
ip access-group 2-100
ip address 2-102
ip dhcp snooping 2-104
ip dhcp snooping information option 2-105
ip dhcp snooping information option allow-untrusted 2-107
ip dhcp snooping information option format remote-id 2-109
ip dhcp snooping limit rate 2-111
ip dhcp snooping trust 2-113
ip dhcp snooping verify 2-114
ip dhcp snooping vlan 2-115
ip dhcp snooping vlan information option format-type circuit-id string 2-116
ip igmp filter 2-118
ip igmp max-groups 2-119

Contents
vi
Cisco Catalyst Blade Switch 3030 Command Reference
78-17262-01
ip igmp profile 2-121
ip igmp snooping 2-123
ip igmp snooping last-member-query-interval 2-125
ip igmp snooping querier 2-127
ip igmp snooping report-suppression 2-129
ip igmp snooping tcn 2-131
ip igmp snooping tcn flood 2-133
ip igmp snooping vlan immediate-leave 2-134
ip igmp snooping vlan mrouter 2-136
ip igmp snooping vlan static 2-138
ip ssh 2-140
lacp port-priority 2-142
lacp system-priority 2-144
link state group 2-146
link state track 2-148
logging file 2-149
mac access-group 2-151
mac access-list extended 2-153
mac address-table aging-time 2-155
mac address-table move update 2-156
mac address-table notification 2-158
mac address-table static 2-160
mac address-table static drop 2-161
macro apply 2-163
macro description 2-166
macro global 2-167
macro global description 2-170
macro name 2-171
match (access-map configuration) 2-173
match (class-map configuration) 2-175
mdix auto 2-177
mls qos 2-179
mls qos aggregate-policer 2-181
mls qos cos 2-183
mls qos dscp-mutation 2-185

Contents
vii
Cisco Catalyst Blade Switch 3030 Command Reference
78-17262-01
mls qos map 2-187
mls qos queue-set output buffers 2-191
mls qos queue-set output threshold 2-193
mls qos rewrite ip dscp 2-195
mls qos srr-queue input bandwidth 2-197
mls qos srr-queue input buffers 2-199
mls qos srr-queue input cos-map 2-201
mls qos srr-queue input dscp-map 2-203
mls qos srr-queue input priority-queue 2-205
mls qos srr-queue input threshold 2-207
mls qos srr-queue output cos-map 2-209
mls qos srr-queue output dscp-map 2-211
mls qos trust 2-213
mls qos vlan-based 2-215
monitor session 2-217
mvr (global configuration) 2-222
mvr (interface configuration) 2-225
pagp learn-method 2-228
pagp port-priority 2-230
permit (MAC access-list configuration) 2-232
police 2-235
police aggregate 2-237
policy-map 2-239
port-channel load-balance 2-242
priority-queue 2-244
queue-set 2-246
radius-server dead-criteria 2-247
radius-server host 2-249
remote-span 2-251
rmon collection stats 2-253
service password-recovery 2-254
service-policy 2-256
set 2-259
setup 2-261
show access-lists 2-264

Contents
viii
Cisco Catalyst Blade Switch 3030 Command Reference
78-17262-01
show archive status 2-267
show auto qos 2-269
show boot 2-273
show class-map 2-275
show controllers cpu-interface 2-276
show controllers ethernet-controller 2-278
show controllers tcam 2-285
show controllers utilization 2-287
show dot1x 2-289
show dtp 2-293
show eap 2-295
show env 2-298
show errdisable detect 2-299
show errdisable flap-values 2-301
show errdisable recovery 2-303
show etherchannel 2-305
show flowcontrol 2-308
show interfaces 2-310
show interfaces counters 2-318
show inventory 2-320
show ip dhcp snooping 2-321
show ip dhcp snooping binding 2-322
show ip igmp profile 2-324
show ip igmp snooping 2-325
show ip igmp snooping groups 2-328
show ip igmp snooping mrouter 2-330
show ip igmp snooping querier 2-332
show lacp 2-334
show link state group 2-338
show mac access-group 2-340
show mac address-table 2-342
show mac address-table address 2-344
show mac address-table aging-time 2-346
show mac address-table count 2-348
show mac address-table dynamic 2-350

Contents
ix
Cisco Catalyst Blade Switch 3030 Command Reference
78-17262-01
show mac address-table interface 2-352
show mac address-table move update 2-354
show mac address-table notification 2-356
show mac address-table static 2-358
show mac address-table vlan 2-360
show mls qos 2-362
show mls qos aggregate-policer 2-363
show mls qos input-queue 2-364
show mls qos interface 2-366
show mls qos maps 2-370
show mls qos queue-set 2-373
show mls qos vlan 2-375
show monitor 2-376
show mvr 2-379
show mvr interface 2-381
show mvr members 2-383
show pagp 2-385
show parser macro 2-387
show policy-map 2-390
show port-security 2-392
show spanning-tree 2-395
show storm-control 2-401
show system mtu 2-403
show udld 2-404
show version 2-407
show vlan 2-409
show vlan access-map 2-414
show vlan filter 2-415
show vmps 2-416
show vtp 2-419
shutdown 2-423
shutdown vlan 2-424
snmp-server enable traps 2-425
snmp-server host 2-428
snmp trap mac-notification 2-432

Contents
x
Cisco Catalyst Blade Switch 3030 Command Reference
78-17262-01
spanning-tree backbonefast 2-434
spanning-tree bpdufilter 2-435
spanning-tree bpduguard 2-437
spanning-tree cost 2-439
spanning-tree etherchannel guard misconfig 2-441
spanning-tree extend system-id 2-443
spanning-tree guard 2-445
spanning-tree link-type 2-447
spanning-tree loopguard default 2-449
spanning-tree mode 2-451
spanning-tree mst configuration 2-453
spanning-tree mst cost 2-455
spanning-tree mst forward-time 2-457
spanning-tree mst hello-time 2-458
spanning-tree mst max-age 2-459
spanning-tree mst max-hops 2-460
spanning-tree mst port-priority 2-462
spanning-tree mst pre-standard 2-464
spanning-tree mst priority 2-465
spanning-tree mst root 2-466
spanning-tree port-priority 2-468
spanning-tree portfast (global configuration) 2-470
spanning-tree portfast (interface configuration) 2-472
spanning-tree transmit hold-count 2-474
spanning-tree uplinkfast 2-475
spanning-tree vlan 2-477
speed 2-480
srr-queue bandwidth limit 2-482
srr-queue bandwidth shape 2-484
srr-queue bandwidth share 2-486
storm-control 2-488
switchport access 2-491
switchport backup interface 2-493
switchport block 2-496
switchport host 2-497