Claessens' Kids Kid'Sleep Moon User manual

-EN-www.claessens-kids.com
CH- 1170 AUBONNE
KID’SLEEP MOON (ITEM N°26014)
Thanks to its Kid’Sleep Moon, a patented item, your child now has a fun alarm clock which indicates whether it is still sleep time or time to get up.
-Before the age of 30 months, we advise you to use the KID’Sleep as a traditional night light. The two parts of the main display light up at the same time
(display with a single character). See 2.5 setting below.
-From the age of 30 months, you can use the main function of your KID’Sleep as a wake-up indicator (display with the two characters in a sleeping/awake
position). When the character is asleep, it means that it is still sleep time. When the character gets into the awake position, the child knows it can get
up as well! So just explain to your child that it can do the same as its little friend!
1. Functions of the buttons on your Kid’Sleep Moon:
Using the clock with or without the alarm
To light up the Kid’Sleep during sleep time or to turn it off in the daytime. By turning the main button to I, the switch from sleeping character to the awake position
happens without the alarm. By setting the main button to , the switch from sleeping character to the awake position happens with an alarm. Between the sleep
periods this button has to be set to O. You have a choice of 4 different alarms and can adjust the volume. See below under 2.1 Setting possible by means of menu.
Lullaby
To start the selected lullaby, push button for 2-3 seconds. The lullaby plays for 3 minutes and then shuts off automatically. To switch it off while it is playing, push
button for 2-3 seconds. You have a choice of 4 different lullabies and can adjust the volume. See below under 2.2 Setting possible by means of menu.
“Go to Sleep” bedtime routine
To prepare your child for going to bed, you can use the very practical “Go to Sleep” bedtime routine: press the GS button for 2-3 seconds. At that moment the
character switches to the awake position and the moon changes into the sun. The sun goes down slowly. After 10 minutes, when the sun has set, the moon rises and
the character switches to the sleeping position. Time to go to bed! You may decide to replace the setting sun by an emptying hourglass and alter the duration of the
“Go to Sleep”, process. See below under 2.3 Setting possible by means of menu.
Wake-up time on weekdays / at the weekend
By turning the small W/WE button to W, wake-up times 1 and 2 are taken into account. By turning the small button to WE, the set times 2 and 3 are taken into
account. In principle the WE position is used during the weekend to make the corresponding nights somewhat longer. For adjusting the various wake-up times, see
below under 2.4 Setting possible by means of menu.
Brightness of the displays
To set the level of brightness of the displays.
Menu
Push the SET button for 2-3 seconds to get into the menu. Also for selecting a function to be adjusted in the menu or to confirm the setting. To scroll in the menu,
press button or .
Quick start
The only two functions to be adjusted at the start are the clock and the 3 different wake-up times: the time to wake up in the
morning, after the afternoon nap and at the weekend.
Setting principle:
To access the menu, push the button at the back of the display for 2-3 seconds; the menu appears. To scroll in the menu use the UP or Down
button at the back of the display. Select the function to be adjusted with SET. Adjust the function with UP or Down. Confirm the selected function with SET, etc.
To return to the previous menu: select and confirm with SET.
Setting the clock time:
a) Push the SET button at the back of the LCD display for 2-3 seconds; the menu appears.
b) Select the text SET TIME with UP or DOWN and confirm with SET. The submenu for adjusting the different setting times appears.
c) Select the text CLOCK with UP or DOWN and confirm with SET.
d) Select the text AM/PM 24H with UP or DOWN and confirm with SET. Choose the AM/PM or 24H mode with UP or DOWN and confirm with SET.
e) Select the numeral for the hours with UP or DOWN and confirm with SET. Set the time with UP or DOWN and confirm with SET.
f) Select the numeral for the minutes with UP or DOWN and confirm with SET. Set the minutes with UP or DOWN and confirm with SET.
g) Select with UP or DOWN and confirm with SET to go back to the submenu for setting the different times.
h) Use the same adjustment for the wake-up times below.
Setting the wake-up times:
Corresponding menu:
-Wake-up time 1(weekday morning) SET TIME / WAKE UP 1 W / …
-Wake-up time 2(afternoon nap) SET TIME / WAKE UP 2 NAP / …
-Wake-up time 3(weekend morning) SET TIME / WAKE UP 3 WE / …
Functioning principle of the wake-up indicator
When it is time to go to sleep (evening or afternoon nap) light up your Kid’Sleep by turning the main button to I. The main display then shows the lit-up character
in the sleeping position, the LCD display shows the moon. This is what your child sees at night or during the afternoon nap!
Ten minutes before the set wake-up time, the moon starts to wane and your child knows that soon it will be time to get up. This warning function that it is nearly
time to wake up is called the “WAKE UP PROCESS”.
At the set time, the sun rises on the LCD display and the character switches to the awake position. The child knows that soon it is time to wake up! To reset the
displays to the sleep/moon position, turn off the Kid’Sleep by turning the main button to O. Reset the button at the next use.
All other functions of your Kid’Sleep Moon are preset. If you want to change the presets, read chapter 2) below

2. Adjustments possible with the aid of the menu
Virtually all the functions of the Kid’Sleep Moon can be set with the aid of the menu. However, we advise you to only adjust functions when you have fully
understood the use of your Kid’Sleep Moon!
Adjustment principle:
To access the menu, press the button at the back of the display for 2-3 seconds and the menu appears. Scroll in the menu by using the UP or Down
button at the back of the display. Select the function to be adjusted with SET. Adjust the function with UP or Down. Confirm the selected function with SET, etc. To go
back to the previous menu: select and confirm with SET.
Adjustable function Corresponding Menu
1. Alarm
Choice of 4 different alarms:
Volume of the alarm:
2. Lullaby
Choice of 4 different lullabies:
Volume of the lullaby:
3. “Go to Sleep” bedtime routine (GS)
Choice of setting sun or emptying hourglass / duration of GS:
4. Clock time and wake-up times
Hour
Wake-up time 1(weekday morning)
Wake-up time 2(afternoon nap)
Wake-up time 3(weekend morning)
5. Using Kid’Sleep as a simple night light
For the very young (0-30 months), the Kid’Sleep can be used as a night light.
The 2 parts of the display light up at the same time.
In this case the decoration to use is the one with a single character:
6. ”WAKE UP PROCESS” (WUP)
Choice of setting moon or emptying hourglass / duration of the WUP:
7. LCD display, with or without light
Using the Kid’Sleep with or without lit LCD display:
SET MELODY / ALARM / / …
SET MELODY / ALARM / / …
SET MELODY / LULLABY / / …
SET MELODY / LULLABY / / …
LCD SCREEN / GO TO SLEEP / …
SET TIME / CLOCK / …
SET TIME / WAKE UP 1 W / …
SET TIME / WAKE UP 2 NAP / …
SET TIME / WAKE UP 3 WE / …
NIGHT LIGHT / …
LCD SCREEN / WAKE UP PROCESS / …
LCD SCREEN / LED / …
Electric supply: the Kid'Sleep Moon alarm clock is mains operated. Nevertheless, you can also operate the Kid'Sleep Moon by means of 3 AA batteries (not included).
In this case the life of the batteries is limited to 1 month if the nightlight function is used 12 hours a day!
__________________________________________________________________________________________________________________________
BATTERY NOTICE/INTALLATION
The use of new alkaline batteries is recommended for maximum performance. Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed
from the unit before being charged (if removable). Do not mix old and new batteries. Do not mix batteries of different types: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) . Only batteries of the same or equivalent type as recommended are to be used. Batteries are to be inserted with the correct polarity. Exhausted batteries
are to be removed from the unit. The supply terminals are not to be short-circuited. This product should be operated only from a type of power source indicated on
packaging. Do not dispose of batteries in fire. We do not recommend the use of rechargeable batteries. BATTERY INSTALLATION: Unplug the power supplies if transformer /
power adaptor is connecting. Locate the battery cover on the back of the unit. Use a screwdriver to loosen the screw. Install 3 new ‘AA’ batteries following the diagram on the
battery cover. Replace the battery cover and tighten the screw to secure. Rechargeable batteries are only to be charged under adult supervision.
WARNING
This product should be situated away from all heat sources, including (but not limited to) radiators, heat registers, stoves, or other products produce heats. Do not use this
product near water. Power supply cords should be routed clear of foot traffic or any items that may put pressure on or cause pinching of the cord.
Do not attempt to service this product yourself. Please contact Claessens’Kids for service information: - If the product has been dropped or the housing has been damaged. - If
the product has been exposed to rain, water or liquid.- If the transformer/power supply cord, plug, enclosure and other parts is damaged. Do not use the unit until the damaged
is repaired. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference. And (2)
This device must accept any interference received,including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation, if this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following
measures:‧Reorient or relocate the receiving antenna. ‧Increase the separation between the equipment and receiver. ‧Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.‧Consult the dealer or an experienced radio/TV technician for help. This Class B digital complies with Canadian ICES-003.
The unit may malfunction if subjected to radio-frequency interference. It should revert to normal operation when the interference stops. If not, it may become necessary to turn
the power off and back on, or remove and reinstall the batteries. In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the
user to reset the device by removing and reinstalling the batteries.
CAUTION
Electrically operated product. Never leave Kid’Sleep Moon within reach of children under three years old! Kid'Sleep Moon is in no way a substitute for parent vigilance!
Electric wire may lead to strangulation. The transformer should be examined regularly for any defect in the cable, the plug, the casing or any other part. In the case of a
defect, Kid'Sleep Moon should not be used until the faulty transformer has been repaired. Kid'Sleep Moon must only be used with the recommended transformer. The
transformer is not a toy! Kid'Sleep Moon must not be connected to a power supply greater than the one indicated. Disconnect the transformer before proceeding to any
intervention such as changing the bulbs. Never use a liquid substance to clean Kid'Sleep Moon! Remove or dispose of all packaging safely before giving to children.
Packaging has to be kept since it contains important informations. Colours and detail design may vary from those illustrated.
Help to protect the environment:
Your equipment contains different recyclable materials.
Please do not dispose of your equipment in domestic waste but hand it in free of charge to a special waste disposal facility for small electrical appliances (Recycling
Point).
Made in China