Clarion DXZS1SUSB User manual

Owner's manual
Mode d'emploi
Manual de instrucciones
DXZS1SUS8
CD/USB/MP3IWMAlAAC RECEIVERWITH CeNET CONTROL
AUTORADIO CDJUSB/MP3IWMA IAVEC COMMANDE CeNET
RECEPTOR DE CD/USB/MP3IWMAlAAC CON CONTROL CeNET
I

This equipment has been tested and found to comply with the limits for aClass Bdigital device,
pursuant to Part
15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in aparticular installation.
If this equipment does cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to consult the dealer or an
experienced
radiorrV technician for help.
Cet appareil aete teste et juge conforme aux limites
des appareils numeriques de Classe B, aux
termes de la Section 15
des Reglements FCC.
Ces [imites ont pour but d'assurer une protection raisonnable contre les interferences parasites
dans une installation residentielle.
Cet appareil engendre, utilise et peut emettre une energie radioelectrique
et, s'il n'est pas installe
et utilise en stricte conformite avec ces instructions,
il peut provoquer des interferences parasites
sur les liaisons radiophoniques. Ceci ne garantit par pour autant qu'une installation particuliere ne
provoquera aucune interference.
Si l'appareil engendre des interferences sur la reception des ondes radio ou de television, ce qui
peut etre verifie en mettant I'appareil hors tension puis sous tension, I'utilisateur est invite a
consulter son revendeur ou un technicien exprimente en radio/television pour lui demander conseil.
m?3
ID3TAG
[
•• ~Ia~~s _.
Windo~s
'" Media'
~
'~A~I:'.1
READY
I
I
I
Este equipo ha sido probado yse ha comprobado que cumple con los Ifmites de un dispositivo
digital
de clase B, segun 10 indicado en la Parte 15 de las Normas de FCC.
Estos Iimites se han establecido
para ofrecer una protecci6n razonable contra interferencias
perjudiciales en instalaciones residenciales.
Este equipo genera, emplea, ypuede radiar energfa
de radiofrecuencia y, si no se instalay emplea
de acuerdo con las instrucciones, puede causar interferencias perjudiciales en las
radiocomunicaciones. Sin embargo, no se garantiza que las interferencias no ocurran en
una
instalaci6n en particular.
Si este equipo causa interferencias perjudiciales en la recepci6n
de radio 0de television, 10 cual
podra determinarse conectando ydesconectando la alimentaci6n del equipo, se aconseja al
usuario que consulte al abastecedor 0
que pida ayuda aun tecnico en radio/television
experimentado.
MODEL IIclarion
12V eGROUND
AM 530-1710kHz/FM 87.9-107.9MHz
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES
OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION,
THIS PRODUCTION COMPLIES WITH DHHS RULES
21 CFR
SUBCHAPTER JAPPLICABLE
AT DATE OF MANUFACTURE,
CLARION
CO"LTD
50 KAMITODA.TODA-SHI,SAlTAMA-KEN,JAPAN
This product includes technology owned by
Microsoft Corporation and cannot
be used or distributed
without alicense from MSLGP,
tr
SERIAL No,
PE-c:::J
tf2\ 27S-c=:J
~ GlananCo .. Ltd
MADEINc=J
Bottom View of Source Unit
Fond de I'appareil pilote
Vista inferior de
la unidad fuente
Be sure to unfold and read the next page. ~
Veuillez depUer et vous referer iJ fa page suivante.
Cerciorese de desplegaryde leer/a pagina siguiente.
DXZ575USB i

Source unit/Appareilpilote/Unidad fuente
[SRC]
[J' ](SOUND)
[SEEK PANEL]
clarion
[~II ENT]
[UP],
[ON]
With the FLIP DOWN PANEL opened/ Ouvrez la PANNEAU INCLINABLE
Apertura del PANEL ABATIBLE
~_~[ ._]_(_EJ_E_C_T)_,\ ~ [CD SLOT]
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez deplier cette page et vous referer aux schemas quand vous lisez chaque chapitre.
Nota: Cuando lea los capftulos, despliegue esta pagina y consulte los diagramas.
ii DXZ575USB

r.
.. CLARION PRODUCT REGISTRATION INFORMATION
For USA and Canada only
Iwww.clarion.com
IDear Customer:
.Congratulations on your purchase of aClarion mobile electronic products. We are
confident that you'll enjoy your Clarion experience.
There are many benefits to registering your product.
We invite you to visit our website at
www.clarion.com to register your Clarion product.
We have made product registration simple with our easy to use website. The registration
~ form is short and easy to complete. Once you're registered, we can keep you informed of
iimportant product information.
l .... Register at www.clarion.com -it's easy to keep your Clarion product up to date.
(INFORMATIONS DE L'ENREGISTREMENT DE PRODUITS CLARION 1
IPour les Etas Unis et Ie Canada seulement I
www.clarion.com I
Cher client:
Nous vous remercions d'avolr achete
ce produit electronique mobile Clarion. Nous ~
sommes confiants que vous apprecierez votre experience Clarion. !
II Ya beaucoup d'avantage aenregistrer votre produits. Nous vous invitons avisiter notre i
site Web www.clarion.com pour enregistrer votre produit Clarion. J
Nous avons facilite la tache d'enregistrement de produit simple et facile grace anotre ;.
site Web. Le formulaire d'enregistrement est court et facile acompleter. Lorsque vous
!etes enregistrer, nous pouvons vous tenir informs des informations important de produits. ~
iEnregistrer awww.clarion.com -c'est facile de mettre ajour votre produit Clarion.J
~ /
(INFORMACION DEL REGISTRO DE PRODUCTO DE CLARION 'I
iPara USA yCanada nomas ~
Iwww.clarion.com
~
Querido Cliente:
,; Felicitaciones por su compra de producto electronico movil de Clarion. Estamos seguros
~ que usted gozara de su experiencia con el producto de Clarion.
~
iHay muchas ventajas al registrar su producto. Le invitamos aque visite nuestro sitio en
Iinternet www.clarion.com para registrar su producto de Clarion.
~ Hemos hecho el registro de producto facil en nuestro sitio. La forma de registro es corta
~ yfacil de completar. Una vez que 10 registre, podremos proporcionarle la informacion de
isu producto. I
lRegistrese en ~.clarion.com - as facil mantener su producto de Clarion actualizado. J
iii DXZ575USB

Thank you for purchasing this Clarion product.
*Please read this owner's manual in its entirety before operating this equipment.
*After reading this manual, be sure to keep it in ahandy place (e.g., glove compartment).
*Check the contents of the enclosed warranty card and keep it carefully with this manual.
*This manual includes the operating procedures of the iPod® interface, CD/DVD changer, Satellite
Radio Receiver and TV tuner connected via the CeNET cable. The iPod interface, CD/DVD changer
and TV tuner have their own manuals, but no explanations for operating them are described.
"iPod" is atrademark of Apple Computer, Inc., registered
in the U.S. and other countries.
Contents
CONTROLS ii
1. FEATURES 2
2. PRECAUTIONS 2
Flip Down Panel 2
Handling Compact Discs 3
3. NOMENCLATURE 4
Names of the Buttons and Their Functions 4
Display Items 5
LCD Screen 5
4. DCP 6
5. REMOTE CONTROL 7
Inserting the Battery 7
Functions of Remote Control Unit Buttons 8
6. OPERATIONS 10
Basic Operations 10
Radio Operations 14
CD/MP3IWMAlAAC Operations 16
Operations Common to Each Mode
21
7. OPERATIONS OF ACCESSORIES 24
USB Operations 24
iPod BB Operations 26
Satellite Radio Operations 28
CD Changer Operations 30
DVD Changer Operations
31
TV Operations 32
8. IN CASE OF DIFFICULTV 33
9. ERROR DISPLA VS 35
10. SPECIFICATIONS
36
DXZ575USB 1

•Flip Down High Visibility 2-Line Display with SLiDETRAK
•6ch/6V RCA Output I53W X 4 Built-in MOSFET Amplifier
•Built-in LPF/HPF
1. When the inside of the car is very cold and
the player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper
playback may not be possible.
If moisture
forms on the disc, wipe it off with asoft cloth.
If moisture forms
on the optical parts of the
player, do not use the player for about one
hour. The condensation will disappear
naturally allowing normal operation.
2. Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
3. This unit uses aprecision mechanism. Even
in the event that trouble arises, never open
the case, disassemble the unit, or lubricate
the rotating parts.
Flip Down Panel
A.CAU.TION
USE OF CONTROLS, ADJUSTMENTS, OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN, MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT
BE ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE
PERSONNEL.
CHANGES OR MODIFICATIONS NOT
EXPRESSLY APPROVED BY THE
MANUFACTURER FOR COMPLIANCE
COULD VOID THE USER'S AUTHORITY TO
OPERATE THE EQUIPMENT.
INFORM ATION FOR USERS:
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE
MANUFACTURER WILL VOID THE
WARRANTY AND WILL VIOLATE FCC
APPROVAL.
This unit uses aflip-down structure that makes possible large-size displays.
A. CAUTION
When opening and closing the FLIP DOWN
PANEL, be careful not to catch your fingers.
They could be injured.
1. Always use this unit with the FLIP DOWN
PANEL closed.
2. Do not force operations or use this device
abnormally when opening or closing the
FLIP DOWN PANEL.
3. Do not use the FLIP DOWN PANEL as atray
to place objects on when it is open.
4. When closing the FLIP DOWN PANEL, do
not press the [OPEN] button.
2DXZ575USB
*Press the center of the DCP to close.
5. Strong impacts to the operating or display
section can cause damage or deformation.
6. If the FLIP DOWN PANEL does not open
fully, gently open it with your hand.

Handling Compact Discs
Use only compact discs bearing the ~n~~ or
cQ]m~~~ mark.
['q~E8rll
Do not play heart-shaped, octagonal, or other
specially shaped compact discs.
Some CDs recorded
in CD-R/CD-RW mode
may not be usable.
Handling
•Compared to ordinary music CDs, CD-R and
CD-RW discs are both easily affected by high
temperature and humidity and some of CD-R
and CD-RW discs may not be played.
Therefore, do not leave them for along time
in the car.
•New discs may Ball-point pen
have some
roughness Roughness
around the
edges. If such
discs are used,
the player may
not work or the
sound may skip. Use aball-point pen or the
like to remove any roughness from the edge
of the disc.
•Never stick labels on the surface of the
compact disc or mark the surface with a
pencil or pen.
•Never
playa compact disc with any
cellophane tape or other glue on it or with
peeling off marks. If you try to play such a
compact disc, you may not be able to get it
back out of the CD player or it may damage
the CD player.
•
Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use
of such discs may cause misoperation or
damage.
•To remove acompact disc from its storage
case, press down on the center of the case
and lift the disc out, holding it carefully by the
edges.
•
Do not use commercially available CD
protection sheets or discs equipped with
stabilizers, etc. These may damage the disc
or cause breakdown of the internal
mechanism.
Storage
•Do not expose compact discs to direct
sunlight or any heat source.
•Do not expose compact discs to excess
humidity or dust.
•Do not expose compact discs to direct heat
from heaters.
Cleaning
To remove fingermarks and dust, use asoft
cloth and wipe
in astraight line from the
center of the compact disc to the
circumference.
Do not use any solvents, such as
commercially available cleaners, anti-static
spray, or thinner to clean compact discs.
After using special compact disc cleaner, let
the compact disc dry off well before playing it.
DXZ575USB 3

Note:
•Be sure to read this chapter referring to the front diagrams of chapter "CONTROLS" on page ii (unfold).
Names of the Buttons and Their Functions
[OPEN] button
•Deeply push in [OPEN] button to unlock the
flip down panel.
[SRC] button
•Press the button to turn on the power.
•Press and hold the button for 1second or
longer to turn off the power.
•Switch the operation mode among the radio
mode, etc.
[OPTION] button
•Press the button to enter the option mode.
•Press and hold the button for 1second or
longer to enter the adjust mode.
[SEEK PANEL]
•The [SEEK PANEL] allows the controls on
the ends to be moved to right or left to permit
station tuning (radio), track selection (CD),
and to perform various settings
in the
adjustment mode.
[MENU] button
•Switch the band, or seek tuning or manual
tuning while
in the radio mode.
•Press the button to enter the list search mode
while
in the CD/MP3IWMAlAAC mode.
•Press and hold the button for 1second or
longer to play the first track while
in the COl
MP3IWMAlAAC mode.
•Press the button to change the character.
[~II ENT] button
•Play or pause atrack while in the CD/MP31
WMAlAAC mode.
•Press the button to enter the preset memory
mode (radio).
•Confirm various settings.
[UP], [ON] buttons
•Press the button upward or downward to
recall the stored station while
in the radio
mode.
•Select the folder while
in the MP3IWMAIAAC
mode.
•Perform various settings.
[I'] (SOUND) button
•Press the button to enter the sound adjust
mode.
•Press and hold the button for 1second or
longer to turn on or off the MAGNA BASS
EXTEND mode.
[ISR] button
•Recall ISR radio station in memory.
•Press and hold the button for 2seconds or
longer: Store current station into ISR memory
(radio mode only).
[IR RECEIVER]
•Receiver for remote control unit. (Operating
range: 30°
in all directions)
[0] button
• Use the button to switch the user titles or
track titles, etc. while
in the CD/MP3/WMAI
AAC mode.
•Press the button to switch the display
indication (Main display, Title display and
Clock time display).
[gt'] (MUTE) button
•Turn mute on or off.
[~] (EJECT) button
•Press to eject aCD loaded in the unit.
[+], [-] buttons
•Press the button upward or downward to
adjust the volume.
[CD SLOT]
•CD insertion slot.
[USB SLOT]
•USB memory insertion slot.
4DXZ575USB

DisplayItems
Operation status indication
Source, Titles, function, Setting,
Clock, etc. are displayed
Operation status indication
Titles, frequency, band, channel,
play time, etc. are displayed
m!m :MUTE indication
IHII :Enter indication
;:J;f:;; :Source indication
CD, USB etc. are displayed
ALL :Disc or Folder indication
RPT :Repeat indication
seN :Scan indication
ROM :Random indication
p-[J :Disc number in~ic~tio~
DISC'_' Preset channel Indication (1 to 6)
~ :MAGNA BASS EX indication
ST :Stereo indication (radio only)
MANU :Manual indication
LCD Screen
IVDZE..r1 :Digital Z-Enhancer indication
liiJDD
MP3 :MP3 indication
WMA :WMA indication
AAC :AAC indication
SR :Sound Restorer indication
SAT :Satellite indication
CH :Channel indication
CAT :Category indication
In
extreme cold, the screen movement may slow down and the screen' may darken, but this is normal.
The screen will recover when it returns to normal temperature.
DXZ575USB 5

ACAUTION
DCP
ACAUTION
•The DCP can easily be damaged by
shocks. After removing it, be careful not to
drop it or subject it to strong shocks.
• If the FLIP DOWN PANEL is kept open, the
DCP may drop due to vibration of the car.
This results in damage to the DCP. 50
close the FLIP DOWN PANEL or remove
the DCP to store into the case.
•The
connector connecting the source unit
and the DCP is an extremely important
part. Be careful not to damage it by
pressing on it with fingernails,
screwdrivers, etc.
Note:
•Ifthe DCP is dirty, wipe off the dirt with asoft, dry
cloth only.
Be sure to close the HOLD FLAP for safety
when removing the DCP.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
2. Insert the left side of the DCP into the main
unit.
3. Pull the DCP toward you and remove it.
4. Close the HOLD FLAP.
Removing the DCP
1. Press the [5RC] button for 1second or
longer to turn off the power.
2. Deeply push in [OPEN] button to unlock the
flip down panel.
*If the flip down panel does not open fully,
gently open it with your hand.
[OPEN] button
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
6DXZ575USB

CD Turn over the remote control unit and slide
the cover
in the direction indicated by the
arrow
in the illustration.
®Insert the battery (CR2025) into the insertion
guides, with the printed side (+) facing
upwards.
@Press the battery in the direction indicated by
the arrow so that it slides into the
compartment.
@Replace the cover and slide in until it clicks
into place.
Notes:
Misuse
may result in rupture of the battery,
producing leakage
of fluid and resulting in personal
injury
or damage to surrounding materials. Always
follow these safetyprecautions:
•Use only the designated battery.
•When replacing the battery, insertproperly, with
+/- polarities orientedcorrectly.
•Do notsubjectbattery to heat,
or dispose of in fire
or water. Do notattempt to disassemble the
battery.
•Dispose of usedbatteries properly.
Insertion guide
DXZ575USB 7

[!],[T]
Functions of Remote Control Unit Buttons
*Some buttons on the remote control unit have different functions from the corresponding buttons on the main
unit.
/Signal transmitter
---------
~ SRC OND 1
[SRC]---;I-i--
IQA
~:"""""":-II--[BND]
----:-::---- [ ~ II ]
II ~ ~»I.....;.;.-II -[~], [~~]
W~~~ , II
[MUTE]--~II ~~R @~II--[DISP]
USR]J ( II ~ ~ II [ROM]
[SCN]~ PS/AS "_fVTR_~ __ [RPT]
clarion
•Sharedmodes
[SRC] button
•Press the button to turn on the power.
Press and hold the button for 1second or
longer to turn off the power.
• Use to alternate operation mode among the
various modes.
["'], [T] buttons
•Increases and decreases volume.
[MUTE] button
•Turns mute function on and off.
[ISR] button
•Recalls ISR radio station stored in memory.
•Press and hold the button for 2seconds or
longer to store current station
in ISR memory
(radio mode only).
[DISP] button
•Press to select the desired display.
8DXZ575USB
•Radio/Satellite Radio modes
[BND] button
•Switches reception band.
[1<llIII~], [~~] buttons
•Moves preset channels up and down.
[SCN] button
•Press to perform preset scan.
•Press and hold the button for 2seconds or
longer to perform auto store.
•
In the Satellite Radio mode, press once to
perform category scan; hold depressed for 1
second or longer to perform preset scan.
•CD/MP3/WMA/AAC and USB
modes
[BND] button
•Press to play the first track.
[~], [~~] buttons
•Press to move the tracks up and down.
•Press and hold the button for 1second or
longer to perform fast-forward/fast-backward.

Functions of Remote Control Unit Buttons
[~II] button
•Switches between playback and pause.
[SeN] button
•Press to perform scan play.
•When
in MP3IWMAlAAC and USB modes,
press and hold the button for 1second or
longer to perform folder scan play.
[RPT] button
•Press to perform repeat play.
•When
in MP3/WMAlAAC and USB modes,
press and hold the button for 1second or
longer to perform folder repeat play.
[ROM] button
•Press to perform random play.
•When
in MP3IWMAlAAC and USB modes,
press and hold the button for 1second or
longer to perform folder random play.
•CD changer/DVD changer modes
[BND] button
•Press to switch to next disc in ascending
order.
[H"'], [ .... ~] buttons
Press to move to the tracks up and down.
•Press and hold the button for 1second or
longer to perform fast-forward/fast-backward.
[~II] button
•Switches between playback and pause.
[SeN] button
•Press to perform scan play.
•Press and hold the button for 1second or
longer to perform disc scan play.
[RPT] button
•Press to perform repeat play.
•Press and hold the button for 1second or
longer to perform disc repeat play.
[ROM] button
•Press to perform random play.
•Press and hold the button for 1second or
longer to perform disc random play.
•iPod BS mode
[...... ], [ ........ 1] buttons
•Press to move the tracks up and down.
•Press and hold the button for 1second or
longer to perform fast-forward/fast-backward.
[~II] button
•Switches between playback and pause.
[RPn button
•Press to perform repeat play.
•Press and hold the button for 1second or
longer to perform all repeat play.
[ROM] button
•Press to perform random play.
•Press and hold the button for 1second or
longer
to perform all random play.
• TVmode
[BND] button
•Switches reception band.
[H"'], [ ........ 1] buttons
•Moves preset channels up and down.
[SeN] button
•Press to perform preset scan.
•Press and hold the button for 2seconds or
longer to perform auto store.
[ROM] button
•Press to alternate between TV and VTR.
I
DXZ575USB 9

I
Note:
•Be sure to read this chapter referring to the front diagrams of chapter "CONTROLS" on page ii (unfold)"
Basic Operations
.ACAUTION
Be sure to lower the volume before
switching off the unit. power or the ignition
key. The unit remembers its last volume
setting. If you switch the power off with the
volume up, when you switch the power back
on, the sudden loud volume may hurt your
hearing and damage the unit.
Turning on/off the power
Note:
•Be careful about using this unit for along time
without running the engine.
If you drain the car's
battery too far, you
may notbe able to start the
engine and this can reduce the service life
of the
battery.
1. Press the [SRCj button.
The mode that was previous active is
displayed.
2. Press and hold the [SRC] button for 1
second or longer to turn off the power for the
unit.
Note:
•The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the
power is
turned on, the "SYSTEM CHECK"appears
in the
display, then the unit returns
to the clock display
mode. The system check starts within the unit.
When the system check
is complete, press the
[SRCj button again.
10 DXZ575USB
Selecting amode
1. Press the [SRC] button to change the
operation mode.
2. Each time you press the [SRC] button, the
operation mode changes in the following
order:
Radio
-+ (Satellite radio) -+ CD/MP3/WMAJ
AAC
-+ USB -+ (iPod BB) -+ (CD changer) -+
(DVD changer) -+ (TV) -+ AUX -+ Radio ...
*External equipment not connected with
CeNET
is not displayed.
Adjusting the volume
1. Press the [+] or [-] button to adjust the
volume.
*The volume level is from a(minimum) to 33
(maximum).
Switching the display
1. Press the [0] button to select the desired
display.
•When the power is turned off
1. Each time you press the [D] button, the clock
time appears or disappears
in the display.

Basic Operations
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound
adjustment function, but emphasizes the deep
bass sound area to provide you with adynamic
sound.
1. Press and hold the [J]button for 1second
or longer
to turn on the MAGNA BASS
EXTEND effect. "M-B EX" lights in the
display.
2. Press and hold the [ J' ]button for 1second
or longer to turn off the
MAGNA BASS
EXTEND effect. "M·B EX" goes off from the
display.
*The adjustment can only be performed when
the
OZE is set to "OZE OFF".
*The factory default setting is off.
Mute
Use this function to turn off the sound
immediately.
1. Press the [94"] button.
The sound turns off and "MUTE" blinks in the
display.
2. Press the [94"] button again to cancel the
mute mode.
Adjusting Sound Mode I
.-
To change sound mode
1. Press the [ J' ]button and select the sound
mode to adjust.
2. Push the [SEEK PANEL] leftward or
rightward to select the "item name".
"S-W
VOL" ~ "OZE" ~ "BASS" ~
"TREBLE" ~ "S RESTOR" +--~ "HPF" ~
"S-W LPF" ~ "BALANCE" ~ "FADER"
3. Press the [UP] or [ON] button to select the
"desired setting value".
* In the case of display blinking "ENT', you
can press the [
...... ENT] button to adjust the
setting value.
*"BASS" and "TREBLE" can be adjusted
only when
"OZE" is set to "OZE OFF" (page
12).
*After completing settings, press the [J J
button to return to the previous mode.
Note:
•During sound adjustment mode, if no
operation is performed for more than 10
seconds, this mode can be canceled and
return to the previous mode.
•Adjusting the subwoofer output
volume
You can adjust the volume output from the unit's
subwoofer output terminal.
2-1. Select the "S-W VOL".
3-1. Press the [UP] or [ON] button to change the
output volume.
*The factory default setting is "0".
(Setting range: +5 to -5)
DXZ575USB 11

Basic Operations
~FreqUency
curve
Gain
Level
(dB)
Center Frequency
Frequency (F) (Hz)
Qcurve :20
~ Qcurve :1
•Adjusting the bass
The bass gain, bass FREQ (center frequency)
and bass Qcan be adjusted as follows.
The adjustment can only be performed when
the DZE is set to "OZE OFF".
2-1. Select "BASS".
2-2. Press the
[~II ENT] button.
2-3. Push the [SEEK PANEL] leftward or
rightward and select from:
"B GAIN" +-+ "B FREQ" +-+ "B Q"
3-1. Press the [UP] or [ON] button to adjust the
gain, the FREQ (center frequency) and the
Q.
B GAIN: -7 to 7(The factory default setting
is "0")
B
FREQ: 50Hz/80Hz/120Hz (The factory
default setting is "50")
B
Q: 1/1.25/1.5/2 (The factory default
setting is "1")
3-2. Press the
[~II ENT] button to return to the
previous mode.
• Q curve
The Qcurve becomes sharper when the
numerical value is increased, and smoother
when the numerical value is decreased.
Flat frequency characteristics can be made by
selecting a Q curve opposite to that of the curve
to be compensated.
:No sound effect
:Suitable for genuine speakers
:Suitable for separate
speakers
OZE 3 : Suitable for co-axial speakers
3-2. When the "OZE
1", "OZE 2" or "OZE 3" is
set, press the
[~II ENT] button. Then
press the [UP] or [ON] button to change the
DZE level from +3 to
-3.
*The factory default setting is "0".
3-3. Press the [~II ENT] button to return to the
previous mode.
•Compensation
There is no need to compensate frequency
characteristics if they are flat (no peaks or
valleys) when you have measured the
frequency characteristics with ameasuring
device. However, sometimes the frequency
characteristics rise or fall
in some places. If this
happens, the frequency characteristics must be
compensated. Create afrequency curve having
characteristics that are opposite to the center
frequency of parts where the characteristics rise
and fall to cancel out these peaks and values,
and make the frequency characteristics as flat
as possible.
Making the frequency characteristics as flat as
possible is called "Compensation".
•Compensation of frequency
characteristics
The figure below shows the relationship
between the center frequency, gain and Q
curve.
•Setting the Digital Z-Enhancer
This unit are provided with 3types of sound
tone effects stored
in memory. Select the one
you prefer.
*The factory default setting is "DZE OFF".
2-1. Select the "OZE".
3-1. Press the [UP] or [ON] button to select the
tone effect. Each time you press the [UP] or
[ON] button, the tone effect changes in the
following order:
"OZE OFF"
+-+ "OZE 1" +-+ "OZE 2" +-+ "OZE
3"
OZE OFF
OZE 1
OZE2
12 DXZ575USB

Basic Operations
• Adjusting the treble
The treble gain and treble FREQ (center
frequency) can
be adjusted as follows.
The adjustment can only
be performed when
the OZE is set to "OZE OFF".
2-1. Select
"TREBLE".
2-2. Press the [~II ENT] button.
2-3. Push the
[SEEK PANEL] leftward or
rightward and select from:
"T
GAIN" +-+ "T FREQ"
3· 1. Press the [UP] or [ON] button to adjust the
gain and
FREQ (center frequency).
T GAIN: -6 to +6 (The factory default
setting is "0")
T FREQ: 8KHz/12KHz (The factory default
setting is "12K")
3-2. Press the
[~II ENT] button to return to the
previous mode.
• Adjusting the sound restorer
The sound restorer enriches the playback of all
types
of music files that have undergone any
level of
data compression.
2-1.
Select "5 RESTOR".
3-1. Press the [UP] or [ON] button to adjust.
Each time you press the [UP]
or [ON]
button, the sound restorer changes in the
following order:
"OFF"
+--~ "1" +-+ "2" {--* "3"
*The factory default setting is "OFF".
Set this adjustment in accordance with the
music source used.
OFF: For music sources compressed at
high bit rate
1: For music sources compressed for high
quality at low bit rate
2: For music sources compressed for
standard quality at
low bit rate
3: For music sources compressed for low
quality at low bit rate
•Setting high pass filter
2-1. Select "HPF".
3-1. Press
the [UP] or [ON] button to select the
setting. Each time you
press the [UP] or
[ON] button, the setting changes in the
following order:
"THROUGH" +-+ "50Hz" +-+ "80Hz" +-+
"120Hz"
*The factory default setting is "THROUGH"
(through).
•Setting low pass filter I
2-1. Select "S-W LPF". •
3-1. Press the [UP]
or [ON] button to select the
setting.
Each time you press the [UP]
or [ON]
button, the setting
changes in the following
order:
"THROUGH" {-l" "50Hz" { ... ~ "80Hz" {-+
"120Hz"
*The factory default setting is 'THROUGH"
(through).
• Adjusting the balance
2-1. Select "BALANCE".
3-1. Press the [UP] button to emphasize the
sound from the right speaker,
press the
[ON] button to emphasize the
sound from
the left speaker.
*The factory default setting is "CENTER".
(Adjustment range: L12 to R12)
• Adjusting the fader
2-1. Select "FADER".
3-1. Press the [UP] button to
emphasize the
sound from the front speaker, press the
[ON] button to emphasize the
sound from
the rear speaker.
*The factory default setting is "CENTER".
(Adjustment range: R12 to F12)
DXZ575USB 13

IRadio Operations
Listening to the radio
1. Press the [SRC] button and select the radio
mode. The frequency appears
in the display.
2. Press the [MENU] button and select the
radio band. Each time the button is pressed,
the radio reception band changes in the
following order:
FM1 ... FM2 ... FM3'" AM ... FM1 ...
3. Push the [SEEK PANEL] leftward or
rightward to tune
in the desired station.
Tuning
There are 3types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Seek tuning
1. Press the [MENU] button and select the
desired band (FM or AM).
2. Tune into astation.
* If "MANU" is lit in the display, press and hold
the
(MENU] button for 1second or longer.
"MANU"
in the display goes off and seek
tuning
is now available.
When the [SEEK PANEL] is pushed rightward,
the station is sought
in the direction of higher
frequencies; if the [SEEK PANEL] is pushed
leftward, the station is sought
in the direction of
lower frequencies.
Manual tuning
There are 2ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at atime.
In the
quick tuning mode, you can quickly tune the
desired frequency.
1. Press the [MENU] button and select the
desired band (FM or AM).
* If "MANU" is not lit in the display, press and
hold the [MENU] button for 1second or
longer. "MANU" is lit in the display and manual
tuning
is now available.
2. Tune into astation.
14 DXZ575USB
• Quick tuning
Push the [SEEK PANEL] leftward or rightward
and hold
in position for 1second or longer to
tune in astation.
•Step tuning
Push the {SEEK PANEL] leftward or rightward
to manually tune
in astation.
Recalling a preset station
Atotal of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations
in memory. Pressing the [UP] or {ON]
button recalls the stored radio frequency
automatically.
1. Press the [MENU] button and select the
desired band (FM or AM).
2. Press the [UP] or [ON] button to recall the
stored station.
Manual memory
1. Select the desired station with seek tuning or
manual tuning.
2. Press the ["'11 ENT ]button to enter the
preset memory mode.
3. Press the [UP] or [ON] button to select a
desired station, then press and hold the
[.....
ENT] button for 2seconds or longer to
store the current station into preset memory.

Radio Operations
Auto store
Auto store is afunction for storing up to 6
stations that are automatically tuned
in
sequentially. If 6receivable stations cannot be
received, apreViously stored station remains
unoverwritten at the memory position.
1. Press the [MENU] button and select the
desired band (FM or AM).
2. Press the [OPTION] button.
3. Push the [SEEK PANEL] leftward or
rightward to select "AUTO STORE".
4. Press and hold the [..... ENT] button for 2
seconds or longer. The stations with good
reception are stored automatically to the
preset channels.
Preset scan
Preset scan receives the stations stored in
preset memory in order. This function is useful
when searching for adesired station
in memory.
1. Press the [OPTION] button.
2. Push the [SEEK PANEL] leftward or
rightward to select "PRESET SeN".
3. Press the [..... ENT] button.
* When adesired station is tuned in, press the
[.....
ENT] button again to continue receiving
that station.
Instant station recall (ISR) I
Instant station recall is aspecial radio preset
that instantly accesses afavorite radio station
at
atouch of abutton. The ISR function even
operates with the unit
in other modes.
elSR memory
1. Select the station that you wish to store in
ISR memory.
2. Press and hold the [ISR] button tor 2
seconds or longer.
•Recalling astation with ISR
In any mode, press the [ISR] button to turn on
the radio function and tune the selected radio
station. "ISR" appears
in the display. Press the
[ISR] button again to return to the previous
mode.
DXZ575USB 15

Precautions when creating MP31
WMAIAAC disc
•Usable sampling rates and bit rates
1. MP3: Sampling rate 8 kHz-48 kHz,
Bit rate 8kbps-320 kbps IVBR
2. WMA: Bit rate 32 kbps-192 kbps
3. AAC: Sampling rate 8 kHz-48 kHz,
Bit rate 8kbps-320 kbps IVBR
•File extensions
1. Always add afile extension ".MP3" (.mp3),
".WMA" (.wma) or ".M4A" (.m4a)
to MP3,
WMA or AAC file by using single byte letters.
If you add afile extension other than
specified or forget to add the file extension,
the file cannot be played.
2. Files without MP3/WMAlAAC data will not
play. The indication
"- -:- -" appears in the
play time display
if you attempt to play files
without MP3/WMAlAAC data.
•Logical format (File system)
1. When writing MP3IWMAlAAC file on aCD-R
disc or CD-RW disc, please select "IS09660
level
1, 2or JOLIET or Romeo or APPLE
ISO"
as the writing software format. Normal
play may not be possible if the disc
is
recorded on another format.
2. The folder name and file name can be
displayed
as the title during MP3/WMAlAAC
play but the title must be within 64 single
byte alphabetical letters and numerals
(including an extension).
3. Do not affix aname to afile inside afolder
having the same name.
•Folder structure
1. Adisc with afolder having more than 8
hierarchical levels will be impossible.
•Tracks purchased at
an iTunes Music store,
and copyright-protected files cannot be
played.
•When playing AAC files that include image
data, additional time may be required before
playback begins.
•Files may not play properly, depending
on the
iTunes version under which an AAC file is
encoded.
What is AAC?
•AAC is an acronym for "Advanced Audio
Coding" and refers to the audio compression
method used with video compression
standards MPEG-2 and MPEG-4.
•AAC files composed with the following
conditions can be played:
-AAC files encoded with iTunes.
-iTunes Ver. 7.0 or earlier.
-File extension ".m4a" (".M4A")
What is WMA?
WMA is the abbreviation of Windows Media
Audio, an audio file format developed by
Microsoft Corporation.
Notes:
•Ifyou playa file with DRM (Digital Rights
Management) for
WMA remaining ON, no audio
is output (The WMA indicator blinks).
•Windows MediaTM,
and the Windows ®logo are
trademarks,
or registered trademarks of Microsoft
Corporation
in the United States and/orother
countries.
•To disable DRM (Digital Rights
Management)
1. When using Windows Media Player 8, click
on TOOLS .... OPTIONS .... COPY MUSIC
tab, then under
COpy SETTINGS, unclick
the check box for PROTECT CONTENT.
Then, reconstruct files.
2. When using Windows Media Player 9, click
on TOOL .... OPTIONS'" MUSIC RECORD
tab, then under Recording settings, unclick
the Check box for RECORD PROTECTED
MUSIC. Then, reconstruct files.
Personally constructed WMA files are used
at your own responsibility.
CDIMP31WMAIAAC Operations
I
_M_~_3/_~_M_~_/A_A_C _
What is MP3?
MP3 is an audio compression method and
classified into audio layer 3of MPEG standards.
This audio compression method has penetrated
into
PC users and become astandard format.
This MP3 features the original audio data
compression to about 10 percent of its initial
size with ahigh sound quality. This means that
about 10 music CDs can
be recorded on aCD-
Rdisc or CD-RW disc
to allow along listening
time without having to change CDs.
16 DXZ575USB