Clarity D613 User manual

D613™

D613
The D613 is perfect for those with a mild-to-moderate hearing
loss by amplifying incoming sound up to 30dB. The D613
offers many features including a speakerphone and a
digital answering machine.
For a full listing of instructions please see the D613 user guide.

D613 Features
•Amplifies up to 30 dB
•DECT 6.0 technology –provides
crisp, clear and interference-free
communication that is also Wi-Fi friendly.
•Large, soft-touch buttons
•Speakerphone in handset
•Digital Answering Machine
•Call Waiting CID
•Expandable up to 5 handsets
•Hearing Aid and T-Coil compatible with
TIA -1083 Compliance.

D613
Parts Checklist
Handset
Base
DCAdapter
6V 600 mA Battery Pack User Guide
Telephone Cord
D613
USER
GUIDE

D613
Installation
1. Connect one end of the telephone cord into the (square) LINE port on the
bottom of the base; connect the other end of the phone cord into the wall
telephone outlet.
2. Connect the DC adapter cord into the DC 6V 600 mA port on the bottom of the
base; plug the adapter into your wall outlet.

D613 Installation
Battery
1. Slide open the battery compartment door and connect
the rechargeable battery into the battery compartment.
2. Put the handset on the base to charge for at least 24
hours before first use. Subsequent charging time should
be 6 –8 hours a day.
A fully charged battery will provide and estimated 10 hours of talk time and 100
hours of standby time.

D613 Handset
Features
1. (TALK)/FLASH button: Press to make a call, answer
a call or to engage Call Waiting/Caller ID function.
2. (End)/BACK button: Press to end a call.
(Menu Mode): Press to move back a menu level.
3. MENU/HOLD/SELECT: Press to access the menu list
and to confirm/save settings in the menu.
(During a call): Press to place the call on hold.
4. X/CLEAR/MUTE: (Idle Mode): Press to access the main
menu of the answering machine and listen to the voice
prompts.
(Pre-dialing/Editing Mode): Press once to delete a character
or digit. Press and hold to delete all characters and digits.
(During a call): Press this button to mute and unmute calls.
(Call List/Phonebook entry): Press to delete an entry.
(Answering Machine Mode): Press this button or the “0” key
to delete the current message playback.
3
1 2
4

D613 Handset
Features
5. Visual Ringer: The light will flash during an incoming call;
the light will remain on when you are on a call and the
BOOST is on.
6. PHONEBOOK: Press this button to access the phonebook.
(The phonebook will hold up to 30 names and numbers)
(Editing Mode): Press to move the cursor to the left.
7. INT (Intercom) button: This feature is only available when
there is 2 registered handsets. It allows you to make
internal calls, transfer external calls from one handset to
another and use the conference option.
8. SPEAKER button: Press to turn on and off the
speakerphone.
9. #/PAUSE/ABC/FORMAT button:
(Idle/Pre-dial/During Call Mode): Press to insert # symbol.
(In number editing mode): Press and hold to insert pause.
(In name editing mode): Toggle between ABC/Abc/abc.
(In call list entry): Press to toggle the Caller ID format
among 7, 8, 10 and 11 digits.
6
7 8
9
5

D613 Handset
Features
10. BOOST button: Press to engage the extra amplification
of 30 decibels. (Screen will briefly display BOOST ON).
11. UP (Scroll Up/Volume Up/Call List)
(Idle Mode): Press to access the call list.
(Menu Mode): Press to scroll up.
(Editing Mode): Press to move cursor to the left.
(During a call/Answer Machine Mode): Press to increase volume.
12. DOWN (Scroll Down/Volume Down/ Redial List)
(Idle Mode): Press to access the redial list (up to 32 digits up to 5
calls).
(Menu Mode): Press to scroll down.
(Editing Mode): Press to move cursor to the right.
(During a call/Answer Machine Mode): Press to decrease volume.
(Call List/Phonebook/redial list entry): Press to scroll down the list.
10
11
12

D613 Base
Features
1. FIND: Press to Find all registered handsets.
2. REPEAT: Press once to replay current message
and twice to play previous message.
3. PLAY/STOP: Press to play and stop playing
messages.
4. SKIP: Press to skip a message and move
forward to next message.
5. Charging LED: The light will turn on red when
the handset is in the cradle base charging.
6. ANSWER MODE: Press to toggle between:
ANSWER OFF/ ANNOUNCE & RECORD/
ANNOUNCE ONLY
1
2
3
4
5
6

D613 Base
Features
7. Answer Machine Display
8. RECORD Announcement: Short press to play current
outgoing message. Press and hold to record your
own outgoing message and release to stop recording.
9. VOLUME Up/Down: Controls the Answering Machine
volume (levels 0-8).
10. DELETE: Press to delete message while message
is playing. Press and hold to delete all messages.
New messages can not be deleted until reviewed.
7
89
10

D613 Menu
There are six main menu options on the D613: Date & Time, Phonebook, Setup HS, Setup
BS, Answer Machine and Reset Settings.
To navigate through the menu:
1. Press the MENU button.
2. Press the UP/DOWNarrow buttons to scroll through the menu;
3. Press the MENU button to open a sub-menu or to select an option. Press the
(Talk Off)/BACK
button to go back to the previous menu level or to cancel an action.
Note: If you do not press any button for 30 seconds the display will automatically
return to standby.

D613 Menu Table
Main
Menu
Date
&
Time
Phonebook Setup
HS Setup BS Answer
Machine Reset Settings
Sub
Menu
Year
Date
Time
View
Add
Edit
Delete
Delete All
PB Capacity
Speed Dial
Ringer Tone
Ringer Volume
Key Tone
Low Batt Tone
Out Range Tone
Handset Name
Language
Ringer tone
Ringer
Volume
Dial Mode
Area Code
Answer Machine
Message Alert
Number of
Rings
Announcement
Record Memo
Call Screening
Remote Access
Security Code
CLR Voice Mail
All Settings

D613 HS
Additional Handset
The D613 will support up to 5 handsets. The D613HS is an expandable handset
that is sold separately.
Registering Additional Handsets
1. Press and hold the FIND button on the base for 4 seconds.
2. Release the FIND button once the IN USE light starts to flash.
3. A confirmation tone will sound when registration is successful. Handset X is
displayed where X denotes the number of handsets. The phone will then go
back to idle.

D613 HS
Additional Handset
Deregister All Handsets
1. Unplug the power from the base.
2. Press and hold the FIND button for 10
seconds.
3. Plug back in the power to the base.
4. Release

D613 Technical
Specifications
General
Model Number: D613
Frequency: DECT 6.0
Amplification: 30 dB
Headset Unit
Dimensions: (H x W x D) 7 x 2 x 1.25 inches
Weight: 3.14 ounces
Base
Dimensions: (H x W x D) 2.50 x 5.50 x 4 inches
Weight: 5.04 ounces
Power Requirements
AC Adapter: 6V DC, 600mA
Battery: 2.4 V 550mAh Ni-MH