Clarity C120 User manual

C120™ Wireless TV Amplifier

C120
The C120 is perfect for those with a moderate-to-severe hearing
loss who have difficulty understanding TV dialog. The C120
allows the end-user to hear the TV clearly and comfortably
without disturbing others.
Sound and Comfort: TogetherAgain

C120 Features
Listen to the TV in wireless
Stereo Surround Sound!
Featuring Clarity Power with
amplification up to 50dB at 124
dBSPL
Telephone Call Notification
lets the user know when the
phone is ringing.
The Public IR feature allows
the headset to be used with
public IR systems at places like
theaters and museums.
Compatible with TVs, Stereos,
MP3 Players.

C120 Features
Clarity Power: 50dB of Amplification
Adjustable Tone and Balance
Multi Headset Capable
Range: 38 ft. (Line of Sight)
Automatic Power On/Off (Headset)
High Fidelity Surround Sound
Public IR Compatible
Two (2) Rechargeable Batteries:
4 hour usage/charge time
Ability to charge 3 at a time
Headset Carrying Pouch

C120
Parts Checklist

1. For the clearest signal, place the
base at the same height of the
viewing level.
2. Do not place the transmitter
(base) in the direct sunlight.
Sunlight and fluorescent lights
can cause interference.
3. The headset must be used in the
same room as the base and no
more than 38 feet away.
4. IR type of invisible light and
requires a “line of sight” to work. If
something blocks the headset from
the base, it will create a “shadow”
and the unit will not work.
C120 Installation
Transmitter

C120 Installation
Transmitter
Connect the Power
1. Connect the AC Adapter into the DC12V port
located on the back of the base.
2. Plug the AC Adapter into a wall outlet.

C120 Installation
Transmitter
Selecting the Appropriate Cord
1. Check the TV or other device for the type of Audio
Outputs available.
2. Depending on the outputs available, select the
appropriate cord included with the C120.
ABC

C120 Installation
Transmitter
A. If the device has both Red (Right) and White
(Left) RCA Outputs:
1. Use the provided RCA Stereo Cable pictured above
and connect to both the device outputs and the C120 base.
2. Set the “Stereo/Mono” switch on base to “Stereo.”

C120 Installation
Transmitter
B. If the device has a 3.5mm (Std. Headphone)
Output:
1. Use the provided RCA –3.5mm Stereo Cable pictured
above and connect to both the device output and the RCA
ports on the C120 base.
2. Set the “Stereo/Mono” switch on base to “Mono.”
3. This option is for use with all other types of audio
devices.