Lexie B1 Parts list manual

Lexie Hearing Aids
Powered by Bose
RECEIVER AWIRE
REPLACEMENT GUIDE

We’re here to help.
For help,
call [phone] and speak
to a Lexie Expert™or go to
lexiehearing.com/us/support

Receiver
wire
Hearing aids Dome kit
(optional)
What you need:

Receiver
(red or blue)
Clear
plastic end
Identify the two ends of
the receiver wire.
Step 1:

On the hearing aids, find the
old receiver wire that has the
same color speaker as the
new cable (red or blue).
Step 2:

Firmly pull the old receiver
wire until it detaches from
the hearing aid body.
Note: You may have to
pull harder than expected.
Step 3:

Align the clear plastic end
of the new receiver wire
with the port on the
hearing aid body so the
red or blue marks line up.
Step 4:

Insert the receiver wire into
the hearing aid body until
you hear or feel a click.
Step 5:

Get a dome for the new
receiver wire. Either pick
your size from a dome kit
(available separately) or
firmly pull the dome off of
the old receiver wire.
OR
Step 6:

On the new receiver wire,
align the opening of the
dome with the receiver and
slide the dome onto the
receiver.
Step 7:

Gently tug the dome to
make sure it’s securely
fastened.
Note:
This helps prevent
the dome from falling off
in your ear canal.
Step 8:

Copyright © 2016-2022
hearX IP (Pty) Ltd.
44-0010-03, REV1