Clarity S-530B User manual

TECHNICAL ASSISTANCE
When trouble is reported, verify there are no broken connections leading to the
speaker. Assistance in troubleshooting is available from the factory. When calling,
you should have a VOM and a lineman’s test set available and be calling from the job
site. Call [phone] and ask for Technical Support, or [phone] for Clarity
24-hour Faxback System or visit our website at http://www.clarity-com.com.
CLARITY equipment is not field repairable. CLARITY maintains service facilities in
Roanoke, VA. Should repairs be necessary, attach a tag to the unit clearly stating
your company name, address, phone number, contact person and the nature of the
problem. Send the unit to:
Clarity
Repair and Return Dept.
5614 Hollins Road
Roanoke, VA 24019-5056
LIMITED WARRANTY
Claritywarrants its products to be free from defects in materials and
workmanship under conditions of normal use and service for a period of one
year from the date of shipment. The obligation under this warranty shall be
limited to the replacement, repair or refund of any such defective device
within the warranty period, provided that:
1. Inspection by Clarity indicates the validity of the claim,
2. the defect is not the result of damage, misuse, or negligence after the
original shipment,
3. the product has not been altered in any way or repaired by others and
that factory sealed units are unopened (A service charge plus parts and
labor will be applied to units defaced or physically damaged),
4. freight charges for the return of products to Clarity are prepaid,
5. all units “out of warranty” are subject to a service charge. The service
charge will cover minor repairs (Major repairs will be subject to
additional charges for parts and labor).
This warranty is in lieu of and excludes all other warranties, expressed or
implied, and in no event shall Clarity be liable for any anticipated profits,
consequential damages, loss of time or other losses incurred by the
buyer in connection with the purchase, operation, or use of the product.
This warranty specifically excludes damage incurred in shipment. In the
event a product is received in damaged condition, the carrier should be
notified immediately. Claims for such damage should be filed with the
carrier involved in accordance with the F.O.B. point.
INSTALLATION INSTRUCTIONS FOR
TRACK STYLE SPEAKERS
MODEL NO. S-530B
Issue 1 947458

CLARITY TRACK STYLE SPEAKERS
Clarity Track Style Speaker, S-530B, incorporates a speaker /transformer / baffle
assembly for use with any Clarity Mixer-Amplifier to provide background music or
voice paging indoors or out. The speaker can operate on 25, 70 or 100 Volt lines or
connect direct to an 8-ohm output, thus bypassing the transformer. Cable extending
from the unit provides easy connection. The speaker is weather-resistant and is
available in white, black or gray.
Model S-530B-WWhite
Model S-530B-BK Black
Model S-530B-GY Gray
TECHNICAL SPECIFICATIONS
Frequency Response: 100 -10KHz
Maximum Power Capability: 30 watts
SPL 1 watt / 1meter 1KHz: 93dB
Speaker: 5" w/10 oz. magnet, 8-ohm
Knob
Mounting
Bracket
FIGURE1
INSTALLATION
1. Mount the bracket.
2. Remove knobs and mount speaker to bracket.
3. Attach knobs and position at the desired angle. Tighten knobs (See Figure 1).
Typical coverage of these speakers is 600 square feet with good quality paging heard
up to thirty feet in front of the speaker. Speakers should be spaced approximately
twenty feet apart.
WIRING
Connect one wire of input to black wire (-) and the other to the white wire (+). Adjust
volume by selecting the appropriate tap setting from the chart below.
WARNING: SWITCH SETTING TWELVE (12) IS USED ON 8-OHM
SPEAKER LINES. DO NOT USE TAP SETTING TWELVE ON
25, 70 OR 100 VOLT LINES.
Tap Setting 100V Watts 70V Watts 25V Watts Ohms
11.9 1.0 .12 5333
23.8 1.9 .25 2667
37.5 3.8 .5 1333
415 7.5 1.0 667
530 15 1.9 333
6Do not use 30 3.8 167
7Do not use Do not use 7.5 84
8Do not use Do not use 15 42
9Do not use Do not use 30 21
10 Open Open Open ---
11 Open Open Open ---
12 Direct 8 ohm Direct 8 ohm Direct 8 ohm 8