Clark Synthesis TACTILE SOUND AQ339 Aquasonic User manual

AQ339 Aquasonic Underwater Speaker
Continuous Power Handling 135 watts
Impedance 4 ohms
Overload Protection Polyswitch
Frequency Response 20Hz to 17kHz
Electrical Connection 100 ft.- Underwater, 16-2 wire
Dimensions 8 in. diam. x 4.5 in. (11.5 cm) deep
The AQ339 Aquasonic Underwater Speaker is the world’s only full-frequency,
full-delity underwater speaker. This amazing speaker brings water to life,
enabling a wide array of pool enthusiasts to enjoy the gift of music below the
water’s surface.
The AQ339 can be used in two dierent ways. For those wanting a more
permanent installation, the AQ339 can be mounted inside a large light niche
with a face ring kit (niche and face ring kit sold separately). For users who need
underwater sound in multiple locations, such as synchronized swim teams, a
tether can be attached to the AQ339 so it can be used as a drop-in speaker.
An amplier is required in order to operate the AQ339 Speaker. Clark Synthesis
recommends using an amplier that is stable at 4 ohms that can deliver 125-150
watts @ 4 ohms (per speaker).
AQ339 Aquasonic Speaker
Mounting: 3/8-16 Hex Nut
0.44
0.865
3/8-16 x 1 1/2 Stainless Steel Stud
Sound Lens
8.00
The AQ339 pictured in a
third-party light niche and
face ring kit. Niche and face
ring kit sold separately.
(20.3 cm)
(2.2 cm)
(1.1 cm)
(Phone) 303-797-7500, (Toll Free) 1-877-252-7544, (Fax) 303-797-7501, (Web) www.clarksynthesis.com
Clark Synthesis’ WebsiteHyperlinks: Buyer’s Guide Price List Buy Now Installation Manual
CLARK SYNTHESIS
TACTILE SOUND
®