Classic Phono TT-34 User manual

User’s Manual
TT-34
Wooden turntable with USB
connection

The lightning flash with
arrowhead symbol, within
an equilateral triangle is
intended to alert the user to
the presence of uninsulated
‘dangerous voltage’ within
the product’s enclosure that
may be of sufficient
magnitude to constitute a
risk of electric shock to
persons.
CAUTION
RISK OF EXECTRIC
SHOCK
DO NOT OPEN
WARNING: TO REDUCE
THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE
COVER (OR BACK), NO
USER SERVICE ABLE
PARTS INSIDE REFER
SERVICEING TO
QUALIFIED SERVICE
PERSONNEL
The exclamation point
within an equilateral triangle
is intended to alert the user
to the presence of important
operating and maintenance
(servicing) instructions in
the literature accompanying
the appliance
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions
2) Keep these instructions
3) Heed all warnings
4) Follow all instructions
5) Do not use this apparatus near water
6) Clean only with dry cloth
7) Do not block any ventilation openings. Install in accordance with the manufacture.
8) Do not install near any hot sources such as radiations, heat registers, stoves, or
other.
9) Only use attachments/accessories specified by the manufacturer.
10) Unplug this apparatus during lightning storms or when unused for long periods of
time.
11) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
12) This appliance shall not be exposed to dripping or splashing water and no object filled
with liquid such as vases shall be placed on the apparatus.
13) Do not overload wall outlet. Use only power source as indicated.
14) Use replacement parts as specified by the manufacturer.
15) The product may be mounted to a wall only if recommended by the manufacturer.
16) Upon completion of any service or repairs to this product, ask the service technician
to perform safety checks.

PREPARATION FOR USE
UNPACKING AND SET UP
• Carefully remove the unit from the display carton and remove all packing material
from the unit.
• Unwind the AC power plug and extend it to its full length.
• Place the unit on a stable, level surface, convenient to an AC outlet, out of direct
sunlight, and away from source of excess heat, dust, moisture, humidity or strong
magnetic field.
• Connect the plug to your AC outlet.
• Raise the lid to expose the phonograph. The phonograph has been secured for
shipment with a transit screw.
• Use a coin or screwdriver to turn the transit screw clockwise. This will allow the
turntable to “float”.
TRANSIT SCREW

Obsah je uzamčen
Dokončete, prosím, proces objednávky.
Následně budete mít přístup k celému dokumentu.
Proč je dokument uzamčen? Nahněvat Vás rozhodně nechceme. Jsou k tomu dva hlavní důvody:
1) Vytvořit a udržovat obsáhlou databázi návodů stojí nejen spoustu úsilí a času, ale i finanční prostředky.
Dělali byste to Vy zadarmo? Ne*. Zakoupením této služby obdržíte úplný návod a podpoříte provoz a
rozvoj našich stránek. Třeba se Vám to bude ještě někdy hodit.
*) Možná zpočátku ano. Ale vězte, že dotovat to dlouhodobě nelze. A rozhodně na tom nezbohatneme.
2) Pak jsou tady „roboti“, kteří se přiživují na naší práci a „vysávají“ výsledky našeho úsilí pro svůj
prospěch. Tímto krokem se jim to snažíme překazit.
A pokud nemáte zájem, respektujeme to. Urgujte svého prodejce. A když neuspějete, rádi Vás uvidíme!