Clayton 690-PTG-03 Guide

September 2020
WARNING
SAFETY LEGEND
• Any alteration to the Stand by a third party will nullify its warranty
WARNING
Hearing protection is recommended when
operating this equipment.
Respiratory protection is recommended when
operating this equipment.
Read and understand operator’s manual before
using this equipment.
Eye protection is required when operating
this equipment.
WARNING WARNING
WARNING
WARNING
Scan this QR code for
online instructions and
documentation, or visit
www.ClaytonHowTo.com
Safety – Operation – Maintenance
Keep this document in a safe place
Read and understand this manual before operating your air tool
Bench Grinder & Stand Kit
Model: 690-PTG-03

Table of Contents ...............................................................................................................2
Applications & Environments .............................................................................................2
What’s Included..................................................................................................................3
Getting Started ...................................................................................................................4
TABLE OF CONTENTS
APPLICATIONS & ENVIRONMENTS
The Clayton Grinder Stand is designed to be used with the Dewalt DW758 or a grinder that ts the bolt pattern on the top plate.
Clayton recommends fastening the grinder stand to the oor for safety.
Repair or Warranty Contact Clayton Associates, Inc. •1650 Oak Street •Lakewood, New Jersey 08701 •P.+1-732-363-2100 F.+1-732-364-6084
www.DustlessMadeSimple.com
•[email protected]
Page 2

Grinder hose
adapter (2)
1” Vacuum hose (2)
Cuff 1” x 1-1/4” (2)
Screw Packets
Y Adapter Cuff 1” x 1-1/2” (2)
Post
Base Plate
Top Plate
Wire Wheele
Bench Grinder
Repair or Warranty Contact Clayton Associates, Inc. •1650 Oak Street •Lakewood, New Jersey 08701 •P.+1-732-363-2100 F.+1-732-364-6084
www.DustlessMadeSimple.com
•[email protected]
Page 3
WHAT’S INCLUDED
The Bench Grinder Kit ships with the following items:
• Post
• Base Plate
• Top Plate
• Post screws
• Grinder mounting screws
• Y Adapter
• 1” Vacuum hose (2)
• Cuff 1” x 1-1/4” (2)
• Cuff 1” x 1-1/2” (2)
• Grinder hose adapter (2)
• Wire Wheele

Seq Item No Description
1 610-GS01-02 Grinder Stand Post
2 SE162012-HHSM-Z Screw 1/4-20 X 3/4in SS Hex
3 WE163202-RFS-Z Washer .250ID x .630OD .05H Round Stainless
4 610-GS01-01 Grinder Stand Base Plate 17in
Seq Item No Description
1 610-GS01-02 Grinder Stand Post
2 SE162012-HHSM-Z Screw 1/4-20 X 3/4in SS HEX
3 WE163202-RFS-Z Washer .250ID x .630OD .05H Round Stainless
4 610-GS01-03 Grinder Stand Mount Plate 11.5in
Repair or Warranty Contact Clayton Associates, Inc. •1650 Oak Street •Lakewood, New Jersey 08701 •P.+1-732-363-2100 F.+1-732-364-6084
www.DustlessMadeSimple.com
•[email protected]
Page 4
GETTING STARTED
1. Assemble grinder stand base plate to post
2. Assemble grinder stand top plate to post
1
2
3
4
3
2
4
1

Clayton recommends fastening the grinder stand
to the oor for safety.
Seq Item No Description
1 SE201832-HHSM-Z Screw 5/16-18 x 2in SS Hex
2 WE204804-RFS-Z Washer .313ID x .750OD .063H Round Stainless
3 NE20181623-HNSZ Nut 5/16-18 Nylon Lock Tall SS
4 690-DW758 Dewalt Bench Grinder
Repair or Warranty Contact Clayton Associates, Inc. •1650 Oak Street •Lakewood, New Jersey 08701 •P.+1-732-363-2100 F.+1-732-364-6084
www.DustlessMadeSimple.com
•[email protected]
Page 5
GETTING STARTED
3. Assemble bench grinder to stand top plate
2
3
1
4

Seq Item No Description
1 690-DW758-L Bench Grinder Vacuum Port Left
2 690-DW758-R Bench Grinder Vacuum Port Right
3 921-1000PBKSC Vacuum Hose 1in Conductive per foot
4 921-1620HTSC Hose Cuff, 1.0 Hose To 1.25 Tool, Static
5 921-1624HTSC Cuff, 1in Hose X 1.5, Static Cond
6 921G-24Y Y Adapter 1.5in Straight Ends Galv
7 SE083208-ABSM-Z Screw 8-32 x 1/2in Button Head Allen SS
Repair or Warranty Contact Clayton Associates, Inc. •1650 Oak Street •Lakewood, New Jersey 08701 •P.+1-732-363-2100 F.+1-732-364-6084
www.DustlessMadeSimple.com
•[email protected]
Page 6
GETTING STARTED
3. Assemble vacuum ports
• Remove 2 screws from left and 2 screws from right grinder wheel covers near rectangular vacuum ports
• Mount left and right port adapters using new screws included.
• Assemble cuffs onto hose as shown
• Assemble cuffs onto vacuum port adapters as shown
• Assemble cuffs onto Y adapter as shown
2
7
4
3
5
6
1

Repair or Warranty Contact Clayton Associates, Inc. •1650 Oak Street •Lakewood, New Jersey 08701 •P.+1-732-363-2100 F.+1-732-364-6084
www.DustlessMadeSimple.com
•[email protected]
Page 7

Clayton products are proudly made in the USA
Repair or Warranty Contact Clayton Associates, Inc. •1650 Oak Street •Lakewood, New Jersey 08701 •P.+1-732-363-2100 F.+1-732-364-6084
www.DustlessMadeSimple.com
•[email protected]