FEEDBACK SPORTS SPRINT User manual

FEEDBACK SPORTS, LLC
GOLDEN, COLORADO
1(800) 975-2854 [email protected]
PRODUCT MANUAL FOR:
SPRINT
WORK
STAND
Parts and Set-up
Warranty Information
Accessories & Other Products
In its commitment to uncompromising product quality, Feedback Sports provides a limited warranty on all Bicycle
Repair and Storage Stands and Accessories. There is a 1-Year Limited Warranty on the Sport-Mechanic Bicycle
Repair Stand. This warranty is to the original user/purchaser of the Feedback Sports product. Feedback Sports
warrants this product to be free from manufacturing defects. This warranty does not include damage to the product
resulting from normal wear and tear, accident, misuse, improper installation or operation or unauthorized repair or
alterations. If the product should become defective within the warranty provisions, we will elect to repair or replace it
free of charge at our option, including free return postage, provided it is delivered prepaid to Feedback Sports. Proof
of purchase must be submitted with the returned product All products needing to be sent to Feedback Sports for
repair or replacement must have a Return Authorization Number and will be returned to the sender un-repaired if one
is not included. It is the sender’s responsibility to pay for shipment to Feedback Sports. If the product is determined to
fall under warranty, Feedback Sports will pay for return shipping to the customer. Please call Feedback Sports for a
Return Authorization Number and return instructions at [phone] or e-mail: [email protected] Products
will be repaired or replaced at Feedback Sports’ discretion. Should Feedback Sports deem a product non-warranty,
we will contact the sender for authorization to repair the product and make arrangements for payment.
THE PURCHASER’S/USER’S SOLE REMEDY SHALL BE SUCH REPAIR OR REPLACEMENT AS IS EXPRESSLY PROVIDED
ABOVE, AND FEEDBACK SPORTS SHALL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THIS PRODUCT FOR ANY PURPOSE WHAT-SO-EVER.
For answers to any questions regarding warranty/service visit website or call Customer Support [phone]. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you. This warranty gives you specific legal rights, you may also have other rights which
vary from state to state.
Warranty Registration
Visit www.feedbacksports.com. This is a quick and convenient process for registering your new Feedback Sports
product. Warranty Registration and Proof of Purchase are required for warranty fulfillment.
P.O. BOX 1278 GOLDEN, CO 80402
Phone: [phone]
www.feedbacksports.com
©2009, Feedback Sports. All Rights Reserved.
Product Manual Item: SM09
WWW.
COVER
COVER
BACK COVER
BACK COVER
GEAR STORAGE BASKET
Complete your storage station with
the Feedback Sports Gear Basket.
Deep wrap-around design holds all
your accessories and the hoops
hold shoes gloves and other items.
TRUING STATION/BASE
For a better ride, true or
build your own wheels in the
revolutionary, ”one-arm”
Truing Station. Use with
base or as an attachment to
your repair stand.
EXPANSION KIT
Convert a 2-bike Velo
Stand into a 4-bike
configuration.
VELO CACHE EXTRA
CRADLE PAIR
Add a third level to 2 or
4-bike configurations
for storing extra
equipment or frames.
VELO CACHE
Aluminum storage stand provides stable
and secure organization and display for
indoor bicycle storage. 2 or 4 bike versions
accommodate all types and sizes of bikes,
even bikes with sloping top tubes.
PRO-ELITE REPAIR STAND
Innovative “Secure-Lock” features ratchet-action
closing and push-button release. Stiff tripod design
allows wrenching on flat or uneven surfaces. Stand
holds up to 85 lbs. on uneven surfaces. For the full
line of Repair Stand models,
visit www.feedbacksports.com
TOOL TRAY
Easily attaches to all Feedback Sports Bicycle Repair
Stands. Compartments shaped and sized to hold lube,
cleaner, tools, brushes, rags and your favorite
beverage. Special deep basin with drain holds
cleaners for washing parts or use to hold large tools
and components.
TOTE BAGS
Use a Feedback Tote Bag for
convenient travel or storage of your
Repair Stands. This keeps the jaw
mechanisms free of excess dust as
well as protecting the stand’s finish.
FLOP STOP HANDLEBAR HOLDER
Keep your handlebars and front
wheel from moving during repairs,
storage or on rear mount car racks.
Attach Flop Stop between the seat
post and handlebars. You won’t know
what you did without it!
PSS-80BT PORTABLE
STORAGE STAND
Portable and easy to set up, the
PSS-80RT is perfect for race event
staging areas, retail floors and
anywhere else you need to store
multiple bikes. The stand holds up to 8
bikes by their saddles. Super portable
design sets up in seconds; breaks
down into two parts and stows in the
heavy-duty tote bag (included).
ALPINE DIGITAL SCALE,
TABLETOP GRAM SCALE,
& DIGITAL CALIPER
Digital scales specifically designed to
weigh bicycles, wheels, and other
outdoor sports equipment. Our Calpier
has a quick reference chart on the
back to take the guesswork out of
common bicycle measurements.
RK-B RAKK
Spring-loaded arm holds bike
by the tire. Easily holds front
or rear wheel without the risk
of scratching rim or spokes.
Wheel slot accommodates all
types of bikes - road,
mountain, cross, BMX and
tandems. Holds 20 mm road
tires up to 2.4” wide MTB
tires in size 20” to 29” wheels.
Attach several RAKK together
to create a store display.
ADDITIONAL PRODUCTS
SPORT-assembly-cover side-12X18.pdf 4/23/09 12:23:12 PM

SET UP FOR SPRINT WORK STAND
FEATURES
SET UP _UNFOLD THE LEGS
SET UP _UNFOLD THE BEAM
SET UP _PLACING YOUR BIKE
SET UP _ENABLE SPINNING FUNCTION
1
2
3
1. Loosen the Leg-Fitting
Quick Release
2. Push down on the
Leg-Fitting
3. Legs will swing out,
tighten the Leg-Fitting
Lock Knob
4
2
1
5
3
1. Fork Attachment Slider
2. Bottom Bracket Pad
3. Free Collar Clamp
4. Telescoping Collar Clamp
5. Pivot Lock Quick Release
6. Leg Fitting QR
WARNING!!! DO NOT SLIDE BEAM TO OPENING
1. Slding the Beam too far
forward will cause the Pivot
Lock Quick Release to
release. This can cause the
bike to fall.
6
12
3
1
1. Lift Beam, continue to
apply force while aligning
slot with screw.
2. Press open quick
release up to allow to
hook on beam.
3. Once beam is engaged
with screw, slide beam
towards rear and tighten
quick release to lock.
- If using 9mm dropouts, you can set up
the width to 100mm, 130mm, or
135mm depending on where you place
the spacers.
- For 15mm axle, remove the 9mm tube.
- For 12 mm axle, insert 12mm tube.
- For 20mm axle, purchase adapter.
Dropout attachments
Bottom
Bracket Pad
For extra stability, place
rear wheel between
wings to prevent side to
side movement
1
2
3
1. Loosen the Telescoping Collar Clamp, set to working height
2. Loosen the Free Collar Clamp
3. Slide Free Collar directly on top of the Telescoping Collar. Lock in
place
4. Release the Telescoping Collar. The beam will be available to spin
allowing easier access to all sides of the bike
4