Clear One Unite 50 User manual

UNITE®50 CAMERA
QUICK START GUIDE

Unite 50 Camera Quick Start Guide
1 Appearance and Interface
2 Packing List
Camera Remote Control USB Cable Quick Start Guide

3 Product Features
Full HD
Supports full high definition (HD) 1080p @30fps image output, while down
compatible with 720p and other resolutions.
USB 3.0
Full function USB 3.0 interface, power supply, video, audio in one. Also, can
support two channels of USB video signal source and one channel audio source.

AF lens
Full auto-focus limited-distortion lens, wide-angle field of view up to 120 degrees
with support for EPTZ.
WDR
Wide dynamic range (WDR) support for optimal image capture in different
lighting environments.
Built-in microphone
Microphone array, with noise-suppression algorithm, picks up voice audio from
up to 12 meters (>39’).
Low-light
A specialized 2D and 3D algorithm contributes to image quality, even during
ultra-low illumination with image SNR as high as 55dB.
Easy installation
Standard damping rotary shaft support, suitable for most monitors, easy
installation, stable and reliable.

4 Remote Control

No.
Name
Function Description
1
Standby Key
On/Off
2
Number Key
Preset setting or transfer preset
3
*Key
For use with other keys
4
Preset Key
Preset：Setting Preset + Number key（0-
9）
5
HOME (PTZ
Control key)
Brings the PTZ camera back to the middle
position
6
Return Key
Return back to the last menu level
7
Zoom Buttons
Moving between wide/narrow angle lens
modes, slowly or quickly
8
Left/Right
Setting Key
Standard: Simultaneously press
Left/Right setting key + 1
Reverse: Simultaneously press
Left/Right setting key + 2
9
Focus Keys
auto/manual/far-end/near-end focus
10
Selection Keys
Select the camera to control
11
#Key
For use with other keys
12
IR Remote
Control Key
[*+＃+F1/F2/F3/F4]: NO.1/2/3/4 address
(not support)
13
Reset Key
Delete preset
14
PTZ control
keys
Used to move the PTZ
15
Menu Key
Used to enter/exit OSD Menu
16
Backlight Key
Turn on/off backlight
17
PTZ reset key
For use with PTZ cameras

5 Safety Precautions
Installation
This product should be placed on a smooth flat surface, or bracket-mounted, if
desired. Avoid contact with any liquid, gas or solid material that may cause
corrosion.
Do not disassemble
This product has no user-repairable parts. Damage caused by unauthorized
disassembly is not covered by warranty.
Electromagnetic fields at specific frequencies may affect image quality.
6 Troubleshooting
Image
Image is jittery when the camera lens is at max zoom:
1) Ensure that the camera is installed in a stable position.
2) Remove vibrating objects/machinery from the proximity of the camera.
Control
Remote control not operating
1) Check/replace batteries in the remote control unit.
2) Ensure the camera working mode is correct.

7 Service and Support
If you need assistance setting up or operating your product, please contact us.
We welcome your comments so we can continue to improve our products and
better meet your needs.
Technical Support
Telephone: [phone]
E-mail: [e-mail]