ClearGreen EcoSquare LH-BS9L User manual

A
1 - 6
EcoSquare Bathscreen With Fixed Panel LH - BS9L
Before Installation:
●Check the contents of the pack carefully before installation.
●The bath MUST be installed level and fully sealed to the tiles.
●Handle with care. Impacts can damage both the glass and the frame.
●Check for any hidden pipes or cables before drilling holes in the wall.
●The wall fixings supplied may not be suitable for your installation. You may need to source alternatives
depending on the construction of the wall you are fixing to.
●Follow each step in turn.
Care and Cleaning:
●Do not use solvents or abrasive material or chemicals to clean the enclosure.
●Only clean using soapy water and a soft cloth, rinse thoroughly afterwards.

B012
B013
B052
B034
B033
B090
B029 B066
A
2 - 6
Parts supplied:
Tools required:
SILICONE
Ø6.0mm
Ø3.0mm
EcoSquare Bathscreen LH - BS9
ST3.5*10mm
B029 B090
B034 B085 B013 B012
B103
1x 4x 1x 1x
1x 1x 4x
1x 2x
ST4*30mm
B088 B066
B098 B102
1x
Ø2.8mm
1x
B089
ST4*10mm
B033
1x
B052
1x
ST4*35mm
B016
5x
ST4*50mm
B014
4x
B088
B089
B085
B016
B014
B093
4x
B098
B102
B103
1x
B093

A
3 - 6
1
Ensure that the fixed panel with waterproof strip is positioned
for assembly, so that the lip of the waterproof strip is going to
be on the inside of the bath.
B102
B103
B103
B066
B088
B089
B066 B098
Inside
B066
B093

A
4 - 6
3
2
B085
Ø6.0mm
B016 B014
Inside

A
5 - 6
5
B029 B033
B034
B090
B016
Ø6.0mm
Ø3.0mm
5mm
4
Firmly push the screen profile onto the wall profile, ensure the screen profile is as
close to the wall as possible. Before securing the screen to the profile ensure that
the gap between the screen and the bath is equal along its whole length.
Ø2.8mm
B012
B013
B052