ClearGreen BS1 User manual

B
1 - 6
Bathscreen - BS1 RH
LH
Before Installation:
●Check the contents of the pack carefully before installation.
●The bath MUST be installed level and fully sealed to the tiles.
●Handle with care. Impacts can damage both the glass and the frame.
●Check for any hidden pipes or cables before drilling holes in the wall.
●The enclosure is reversible: " door can be either left or right opening. "
In the remainder of this manual the illustrations will only show the left hand installation of the bath screen.
●The wall fixings supplied may not be suitable for your installation. You may need to source alternatives
depending on the construction of the wall you are fixing to.
●Follow each step in turn.
Care and Cleaning:
●Do not use solvents or abrasive material or chemicals to clean the enclosure.
●Only clean using soapy water and a soft cloth, rinse thoroughly afterwards.

B
2 - 6
Parts supplied:
Tools required:
SILICONE
Ø6.0mm
Ø2.8mm
Bath screen
B013
B014
ST4*50mm ST3.5*10mm
B067 B068
B016 B014 B013 B012 B069
B070 B072
1x 1x 2x 1x 1x
4x 4x 4x 4x 1x
1x 1x 1x
ST4*30mm
B012
B016
B064
B064
B065
B065 B066
B066
B067
B068
B069
B070
B071
B071
B072

B
3 - 6
inside
inside
B064
B066
B065
B070
1
RH
LH
B069
B069
B071
B066
B064
B070
B066
B065
B069
B069
B071
B066

B
4 - 6
2
15mm
Ø6.0mm
B016 B014
3
B072
B068
B067

B
5 - 6
4
Firmly push the screen profile onto the wall profile, ensure the screen profile is
as close to the wall as possible. Before securing the screen to the profile ensure
that the gap between the screen and the bath is equal along its whole length.
Inside
Ø2.8mm
B012
B013
5

B
6 - 6
6
24H
www.qssupplies.co.uk