Club 3D CSV-3242HD User manual

CSV-3242HD
USB 3.0 Dual Display Docking Station
Quick Installation Guide
CLUB 3D
USB 3.0 Dual Display Docking Station
Quick Installation Guide
For more support contact us at:
For Driver update please visit us at www.club-3d.com.
And please contact [e-mail]

Installing the Driver
CAUTION: DO NOT
•connect the docking to a computer before installing the provided driver.
• The following strings and screenshots may vary slightly from each operating system.
• Windows® 7 must be upgraded to SP1 or later.
Windows OS
1. DownloadDownload the driver from our website.
2 Click Run Setup.exe to execute the installer program.
Wait for the program to install the drivers.
3. Click Finish to complete the installation.
NOTE:
a. If the AutoPlay does not start automatically, locate and double-
click on the Setup.exe file in the driver folder to launch the setup.
b.Enter the administrator password and click Yes, if a User
Account Control dialog box is prompted.
c. For some Windows Operating Systems, the driver will
automatically be installed. If you need to install the driver manually, follow the
instructions above.
Mac OS®
1. DownloadDownload the driver from our website.
2. If the License agreement is prompted, click Continue to start
the driver installation.
3. Click Restart to finish installing the software.
Making the Connection
1. Connect the Docking Station to a DVI monitor (Dual Display Docking Station
to a DMI or/and DVI monitor) and a computer.
The screen may temporarily go black or flash during this process.
2. Connect the USB peripherals, such as Ethernet, speaker and microphone to the
corresponding connectors.
Multi-monitor Configuration
An extra DVI monitor can be connected through the Docking Station (HDMI and
DVI monitors for Dual Display Docking Station) if one monitor is already connected
to the PC directly. Once the extra monitor is connected, it can be configured to use
either “Mirror mode”, “Extended mode” or be the Primary display.
Position the mouse anywhere on the Windows Desktop, rightclick and select
Display Settings on Windows 10, Screen Resolution on Windows® 7/ Windows® 8/
Windows® 8.1, Personalise > Display Settings on Windows® Vista or Properties >
Settings on Windows® XP.
Alternatively, click utility icon in the Windows System Tray, and the Restart and
select DisplayLink Manager or Video Setup.
• Incorporates HDMI® technology.
The Quick Installation Guide describes only the basic instructions on installation.
For more information, please refer to our website.