Coalesse tX2 User manual

Page 1 of 4
939500535 Rev A
tX2 - Hutch Mounted Overhead Storage
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
© 2004 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
2
3
4
Hutch Mounted
Overhead Storage

Page 2 of 4
939500535 Rev A
1. Insert cam locks, connecting bolt and
assemble hutch supports as shown (1a),
making sure the arrow on the cam lock is
pointed toward the connecting bolt (1b).
2. Tighten the two cam locks shown to
secure hutch support.
3. Peel paper backing then apply precut
double stick tape to bottom surfaces.
Align hutch support side panels with
work surface’s edge. CAM LOCK
ARROW POINTING
IN DIRECTION OF THE
CONNECTING BOLT
1b
1a
TIGHTEN THESE TWO
CAM LOCKS ONLY AND
SECURE HUTCH SUPPORT.
3
2

Page 3 of 4
939500535 Rev A
4. Secure hutch mount brackets as shown.
5. Install tackboard.
6. Install connecting bolts in bottom of
cabinet (pre-drilled holes). (6a) Tighten
all cam locks and secure overhead to
hutch supports. (6b) Make sure the
arrow on the cam lock is pointed toward
the connecting bolt.
7. Lower unit and secure with half-turn.
CAM LOCK
ARROW POINTING IN
DIRECTION OF THE
CONNECTING BOLT
6b
6a
4
5

Page 4 of 4
939500535 Rev A
UP/DOWN
IN/OUT
SIDE TO SIDE
DOOR HINGE
HINGE ADJUSTMENT
A #2 screwdriver is recommended for adjusting hinge.