COASTLINE CAFE FUSION 322 User manual

Page 1
REV A
1PLEASE READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING. Carefully remove contents
from box. Make sure that all parts and hardware are included using the Parts List below.
Required Tools: Phillips Head Screwdriver (not included) 4mm Allen Key (included)
COASTLINE CASUAL
11 Industrial Drive
Coventry, Rhode Island 02816
ASSEMBLY INSTRUCTIONS
CAFE FUSION DINING TABLE
322 (Dining Base)
325 (Bar Base)
323 (Round Top)
324 (Square Top)
WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114
80mm Hex Lag (Actual Size)
Part Code: 316-1/4-10-80HL x 16
Aprons
x 2 ea Part Code: 4MMALLEN
4mm Allen Wrench (Actual Size)
x 1
x 16
Part Code: TAP-5/8
5/8” tap® (Actual Size)
Part Code: 316-8x1-3/4PFDS
1-3/4 Phillips Head Screw (Actual Size)
x 8
x 18
3/4” Pan Head (Actual Size)
Part Code: 316-8x3/4PTS
Table Top
x 1
Table Top
x 1
Leg Assemblies
Stretchers
325 x 4
324
322 & 325
x 2
323
322 x 2

Page 2
REV A
Align pockets in long
aprons with protruding
screw heads from
step 3. Secure using
3/4” pan head screws.
Attach short aprons to
aluminum using 1-
3/4” phillips head
deck screws through
holes in aluminum
into pilot holes in
short aprons.
Attach Stretchers to legs
through counter-bored
holes in legs into pilot
holes in stretchers using
80mm hex lags.
2ATTACH STRETCHERS TO LEG ASSEMBLIES 3ATTACH SHORT APRONS
4ATTACH BASE TO TABLE TOP 5ATTACH LONG APRONS
6PLUG ALL HOLES WITH PROVIDED 5/8” taps®
Align aluminum from
base assembly with
cleats on table top
assembly. Secure
using 3/4” pan head
screws through holes
in aluminum.