
MAINTENANCE
MANUAL AMENDMENT
Manual: SM245 Amendment #: 2
Document # SM245\Maintenance\809-0002 Amendment Date: Jan 2, 2007
Amendment # 2 Jan 2, 2007 Page 1
ENG-FORM: 809-0109.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
The purpose of this amendment is to add the latest drawing revisions to the manual.
Amendment Instructions:
1 Remove Pages Replace With Pages
6-1 Rev 4.10 Amendment 1 6-1 Rev 4.10 Amendment 2
2 Remove Drawings (Section 6) Replace or add Drawings (Section 6)
245\245-1 Rev 1.50 245\245-1 Rev 1.60
245-41\245-3 Rev A 245-41\245-3 Rev 1.11
245-41\245-41 sht 1 of 2 Rev 1.50 245-41\245-41 sht 1 of 2 Rev 1.60
245-41\245-41 sht 2 of 2 Rev 1.60 245-41\245-41 sht 2 of 2 Rev 1.70
245-51\245-001-3 Rev A 245-51\245-001-3 Rev 1.11
245-51\245-51 sht 1 of 2 Rev 1.20 245-51\245-51 sht 1 of 2 Rev 1.30
245-51\245-51 sht 2 of 2 Rev 1.40 245-51\245-51 sht 2 of 2 Rev 1.50
245-61\245-002-3 245-61\245-002-3 Rev 1.01
245-61\245-61 sht 1 of 2 Rev 1.20 245-61\245-61 sht 1 of 2 Rev 1.30
245-61\245-61 sht 2 of 2 Rev 1.30 245-61\245-61 sht 2 of 2 Rev 1.40
Note: Ensure that all drawings are inserted in the order shown on the latest drawing lists.
5 Update the Amendment Record sheet at the front of the manual.
6 Insert this page into the manual after the Amendment Record sheet (page iii).
Manual Amendment ends after the following amended pages