CocktailAudio BF-11 User manual


Touch the interface key to activate the (AUX) mode
Quick Start Guide
Wireless Stereo Speakers
Main features
● Wi-Fi based network audio streaming
● Bluetooth 4.0 based aptX® audio streaming
● Auxiliary audio source
1Appearance and Functions
Rearview
321
1. Power input 2. AUX input 3. Multifunction key
Function keys:
oIn Bluetooth mode, press the multifunction key to launch
a new pairing device.
oIn Wi-Fi Station mode, press the multifunction key to
launch WPS/QSS pairing.
oIn Wi-Fi mode, press and hold the multifunction key for
2～3 seconds to switch between AP mode and Station
mode
Topview
Touch Key (K1~K4)
K1 (ON/Standby): Touch this interface when the device is in standby to
turn it ON.
(Hold for 1 second when the device is ON for standby mode)
K2: Mode switching interface, touch and hold for 1 second to select
Bluetooth, AUX IN orWi-Fi audio source.
K3/K4: Touch these interfaces (for a few seconds) to regulate the volume
LEDs (L1~L7)
L1: ON/OFF indicator: red indicates that the device is ON;
blinking red is standby and green means working mode.
L2: Bluetooth status indicator: When it is ON, it indicates that
the Bluetooth connection is operating properly. Slow blinking
means a new Bluetooth connection is being set-up and a rapid
blinking, means an automatic pairing/searching of a
previously paired connection is in motion.
L3: AUX status indicator:The AUX IN mode is selected.
L4: Wi-Fi status indicators: WHITE indicates Station mode,
GREEN indicates AP mode (Access Point).
In Station mode, when the indicator blinks slowly, it means a
new WPS/QSS device pairing is in motion. When it blinks
faster, it means the device is searching for a previously
connected device and ON (permanently lit), means the Wi-Fi
mode is working properly.
L5: Touch user interface - The indicator blinks at each touch
or mode switch.
L6: Light volume up - The indicator blinks at each touch.
(Bright light means that the volume is at its maximum level)
L7: Light volume down - The indicator blinks at each touch.
(Bright light means that the volume is at its minimum level)

















Touch Interface Working /Active Status
Power LED ON/OFF Green/Red
Bluetooth/AUX/Wi-Fi LED Per Indicator
Mode Switching LED White
Volume Up LED White
Volume Down LED White
2Hardware Connection
Connect the power adapter to the speaker as shown below
After connecting the mains, the LED will turn from red to green in
about 20 seconds, else touch the interface to switch from red to
green.
3 AUX Connection Mode
Connect a mobile phone (or a PC or other devices) to the
speaker via a 3.5 audio cable - as shown below.
3.5audiocable
The output will be heard from the speaker when music is
played from the source device.
Playing music via 3.5 audio cable from smart phones or other devices 4Bluetooth Connection Mode
Touch the interface
key to activate the
(Bluetooth) mode.
Press the multifunction Key
and the Bluetooth indicator
will start blinking slowly.
Enable the Bluetooth function on
your mobile device and search for
the Bluetooth ID of the speaker.
An inert Bluetooth indicator
means the connection is
successful.
An audio from the source
device can now be played
through the BF-11
Playing audio files via Bluetooth from a smart phones/other devices
★Tip: Bluetooth pairing is only done once – the BF-11 will automatically connect next time.
★Tip: Ensure both ends are properly inserted into the jack port.
K1 K2 K3 K4
L1L2L3L4L5L6L7
BF-11
★Tip: The Bluetooth name of the speaker is
DABA which is printed on a label at the base
of the speaker (password 0000) by default.
● DLNA/UPNP/DMR based audio streaming
Power adapter

7.
Open the Wi-Fi Music playerApp.
Open the Wi-Fi Music player App.
Touch the mode interface key to switch the
speaker to (AP) mode.
After the App detects a playback device one can enter the
main interface (Fig. a). Tap the icon on the upper
right, then "Pair with Router" (Fig. b) followed by "Select
router for pairing" (Fig. c) to connect your device to the
router (Fig. d).
WhentheAppdetects ,onecan
click on the play button to stream music from the
phone/other to the speaker (BF-11).
Touch the mode interface key to switch the speaker
to Access point (AP or Direct Mode).
At the “App Store” Tap
5Download and Install APP
For iOS devices - using an iPhone as an example:
Search for “Wi-Fi Music” or check our website for the
link - download and install the app.
Click on download to install
For Android devices - using SAMSUNG mobile phones as an
exam
p
le:
At "Google play"
Search for “Wi-Fi Music” or check our website for the link -
download and install the app.
6 Wi-Fi Connection Mode
Wi-FiAccess Point (APMode)
Audio signals are transferred directly via wireless network.
If the indicator is green, then the device is already in
AP mode else press and hold the multifunction key for
2~3 seconds to switch to AP mode
★Tip: This procedure should be done when the Wi-Fi indicator is green
Enable the WLAN on the mobile phone/other, search and
connect to the wifi/ssid - DSP_xxxxxx.
Router Mode (Pairing - Recommended)

★Tip:AP mode is useful when no network or internet streaming is required.
Use the Internet via the router and stream music to the speaker via the wireless network connection.
Click on download to install
★Tip: After the successfully connection to the router, the speaker will connect automatically upon
every usage. This is useful for streaming internet services without switching to Bluetooth or APmode.
★Tip: The Wi-Fi or SSID name of the speaker is printed on a label at
the base of the s
p
eaker
(p
assword 87654321
)
b
y
default.
Connect the speaker to the router
If the indicator is green, then the device is
already in AP mode else press and hold the
multifunction key for 2~3 seconds to switch to
AP mode

Enable the WLAN on the mobile phone/other, search
and connect to the wifi/ssid - DSP_xxxxxx.
The Wi-Fi indicator on the speaker will turn white (Station Mode),
indicating a successful connection to the router - then close the Wi-Fi
Music player. Connect a mobile phone/other to the router
Enable the WI-FI on the mobile phone/other and
connect the phone to the router (internet)....
Open Wi-Fi Music App and stream music, online
services or home network thru the BF-11.
Fi
g
.
a
Fig. b
Fig. c Fig. d
★Tip: This procedure should be done when the Wi-Fi indicator is green
★Tip: The Wi-Fi or SSID name of the speaker is printed on a label at
the base of the speaker (password 87654321) by default.
Tip：You canalsogettheappbyscanningtheQRcode.
Tip：You canalsogettheappbyscanningtheQRcode.
SCANMESCANME
Scan the QR code
for the App