Cocoon HE180447 User manual

1. Mounting your phone
holder with sele light
Using the clip at the end of the
product, carefully clip the phone
holder with sele light to the edge of a
table, desk or anywhere that the clip
will grip securely
NOTE: You will need to check that you have access
to either a computer or USB power adaptor and
power supply for the sele light
2. Mount your smartphone
by securing it in the
phone holder
Pull the top section of the phone
holder to extend. Carefully place your
phone between the top and bottom
sections of the holder. Your phone
should be rmly secured
NOTE: You won’t need to remove your phone case
3. Lighting mode
Plug the USB into either a power
adaptor (not supplied) or a computer/
laptop (not supplied). Then press the
power button on the control panel.
On the control panel you can adjust
the brightness of the LED sele light
by pressing the + to increase the
brightness or the – to decrease the
brightness. There are 10 levels for you
to chose from. You can also change
the colour of the white by pressing the
button. There are three whites to
choose from (these range from cold
to warm white)
4. Position the phone
holder with sele light
at your desired position
and angle
Move the light around and the phone holder around until you are happy
with the position of both of these. You can also adjust the angle of the
phone holder
5. Once you are happy with the look, simply smile and
start
Aim the mobile and press either the camera image to take a photo or start
recording
Using the
phone holder
with sele light
HE180447
PLU: 700258
12/2019
1.
2.
3.
Increase
brightness
Change colour
temperature
Decrease
brightness
Power
*Smartphone not included

Using the
phone holder
with sele light
Specications
Input rating: 5V 1A
Safety Instructions
• Do not look directly into the LEDs when operating
• LED light output is strong enough to injure human eyes. Precautions
must be taken to prevent looking directly at the LEDs for more than a few
seconds
• Long-life LED lights are not replaceable
• For indoor use only
• Keep away from liquids, oils, petrol, and all chemicals
• Do not exposure to heat sources
• Do not use if power supply cable becomes damaged or broken
• If the lighting xture is damaged, it should be exclusively replaced by the
manufacturer or the service agent or qualied person in order to avoid a
hazard
• Never add any attachments and/or equipment without the approval of
the manufacturer
• Unauthorized modications may result in re, electric shock or other
personal injury and avoid your warranty
• Keep away from children
• Supervise young children to ensure they do not play with the product
After Sales Support
Phone: [phone]
Email: [email protected]
HE180447
PLU: 700258
12/2019