Cocoon HE414114 User manual

DOOR INTERCOM SYSTEM
WITH 2.4” COLOUR LCD
INSTRUCTION MANUAL
Model Number: HE414114

02
After Sales Support
1300 663 907
Model Number HE414114
[e-mail]
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for a period
of 12 monthsfrom the date of purchase. Defects that occur within this warranty period,
under normal use and care, will be repaired, replaced or refunded at our discretion.
The benefits conferred by this warranty are in addition to all rights and remedies in respect
of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian ConsumerLaw.
You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage.You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
AFTER SALES SUPPORT
YEAR WARRANTY
1
MODEL: HE414114 PRODUCT CODE: 49100 02/2015
[e-mail]
1300 663 907
AUS
Door Intercom System with 2.4” Colour LCD

Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for a period
of 12 monthsfrom the date of purchase. Defects that occur within this warranty period,
under normal use and care, will be repaired, replaced or refunded at our discretion.
The benefits conferred by this warranty are in addition to all rights and remedies in respect
of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian ConsumerLaw.
You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage.You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
AFTER SALES SUPPORT
YEAR WARRANTY
1
MODEL: HE414114 PRODUCT CODE: 49100 02/2015
[e-mail]
1300 663 907
AUS
Door Intercom System with 2.4” Colour LCD

General Safety Instructions................................ ................................ ..........1
Parts List.........................................................................................................2
Product Features............................................................................................2
Technical Specications ................................................................................2
Product Overview...........................................................................................3
Getting Started ...............................................................................................4
Installing your product ...................................................................................5
Accessories ....................................................................................................7
Using your product.........................................................................................7
Troubleshooting Guide...................................................................................8
Repairs and Refurbished Goods or Parts Notice.........................................9
Contents

1
After Sales Support
1300 663 907 Model Number HE414114
[e-mail]
General Safety Instructions
Read this manual thoroughly before rst use and keep it in a safe place for future
reference, along with the warranty card, purchase receipt and packaging. The
safety precautions enclosed herein reduce the risk of re, electric shock and injury
when correctly adhered to.
Follow all instructions and take notice of all warnings to reduce the risk of re
or electric shock. Do not expose this product to water, rain, moisture or dust.
Electronic products of this kind should never be subjected to moisture or extreme
temperatures.
• There are no user-serviceable parts inside this product.
• Do not repair the unit yourself. If your device is not functioning correctly,
disconnect the product from power, remove the batteries, and contact after
sales support.
• Supervise young children to ensure they do not play with the product.
• Do not expose to water, dust, moisture, chemicals, oils, or other liquids.
• Do not expose to naked ames or other heat sources.
• Do not drop or subject the device to undue shock.
• Keep device away from magnets at all times.
• Keep away from direct sunlight. Indoor use only.
• Unplug this device during lightning storms or when unused for long
periods of time.
• Always observe basic security precautions – this device is not a substitute
for basic security measures such as locking door and window locks.

2
After Sales Support
1300 663 907
Model Number HE414114
[e-mail]
Parts List
1 x Exterior Doorbell with Camera and Microphone
1 x Internal Handset with Monitor
1 x Mounting Bracket for Exterior Doorbell
1 x AC Adapter
1 x Doorbell Seal
1 x Doorbell Mounting Kit (includes 4 screws, 4 screw plugs and 4 screw covers)
1 x 10m Connection Cable
Product Features
• See who’s at the door before answering on the Door Intercom with 2.4” Colour LCD
• Colour camera can be activated by the indoor unit to see outside
• 3m night vision to see who is at the door at night
• Compatible with some after-market electronic remote door latches (not included)
• Simple pick up and talk function, works just like a telephone handset
• DIY installation with included 10m extension cable from handset to doorbell intercom
Technical Specications
• 2.4" TFT LCD Panel
• 1/4" CMOS camera
• Night vision up to 3m
• DC15V adaptor
• 10m extension cable
• Operating temperature -10 to 40 degrees C

3
After Sales Support
1300 663 907 Model Number HE414114
[e-mail]
Product Overview
1
2
4
3
5 6
7
1. 10m Connection Cable
2. Mounting Accessories
3. Power Adaptor
4. Base Unit
5. Rubberised Seal
6. Doorbell Unit
7. Handset
8. Colour LCD Screen
9. Display Controls
10. Volume Control
11. Unlock Button
12. Screen Power Button
9
10
11
12
8

4
After Sales Support
1300 663 907
Model Number HE414114
[e-mail]
Warning: Ensure your handset is not connected to power when connecting wires.
Getting Started
1. Unpack
Unpack the Door Intercom System with 2.4” Colour LCD from the packaging and
check you have all components.
1 x Exterior Doorbell with Camera and
Microphone
1 x Internal Handset with Monitor
1 x Mounting Bracket for Exterior
Doorbell
1 x AC Adaptor
1 x 10 metre cable
1 x Doorbell Seal
1 x Doorbell Mounting Kit (includes
4 screws, 4 screw plugs and 4 screw
covers)
2. Connect
a. Connect the Handset to the base unit by plugging the end of the cord into the
port on the bottom of the base unit.
a. Slightly loosen each screw for the connection points in the back of the handset
using a Philips head screwdriver (not supplied).
b. Insert each prong of your 10 metre cable under the screw at the back of
the handset base, ensuring the colour of each connection matches its
corresponding connection point.
c. Tighten each screw so your connection is rm and will not come loose during
everyday use.
d. Connect your AC adapter to your handset by plugging it into the back of the
handset.
TO CAMERA
TO AC ADAPTOR

5
After Sales Support
1300 663 907 Model Number HE414114
[e-mail]
Installing Your Product
Please ensure the distance between your Doorbell and Handset does not exceed
10 metres as this is the length of the cable provided. Ensure you have an active
power point within 1.8 metres of your handset as power will be required.
1. Positioning Your Doorbell and Handset
a. Doorbell should be positioned in a well lit area, out of direct weather conditions.
b. Position your Doorbell with the Doorbell’s camera approximately 145cm from
the ground as this will capture most visitor’s height differences. Refer to the
diagram:
c. Position your Handset approximately 140cm from the ground, depending on the
user’s height.
<10m
<1.8m
Lock
(Not Included)
145cm
140cm

6
After Sales Support
1300 663 907
Model Number HE414114
[e-mail]
2. Installing Your Doorbell
a. Using the mounting bracket as a template, mark out where your Doorbell will be
installed.
b. Drill a hole through the wall in between the marked areas big enough to pass the
connector cable through. Ensure there is no wiring or pipes in or behind the wall.
c. Place the mounting bracket against the wall and pass the Doorbell wiring
through the hole.
d. Remove the screw covers in the top and bottom of the front of the Doorbell and
place the Doorbell, mounting bracket and Doorbell seal in the desired location.
e. Drill holes in the previously marked
positions, to the required depth, ensuring
there are no wires or pipes in or behind the
wall.
f. Insert the screw plugs into the drilled holes.
Secure the Doorbell and the mounting plate
using the screws provided.
g. Once secured, replace the screw covers to
shield the screw from sight.
3. Installing Your Handset
a. Using the mounting slots on the back of the Handset base as a guide, measure
and mark the desired location for your Handset.
b. Drill holes in the marked positions, to the required depth, ensuring there are no
wires or pipes in or behind the wall. Screws should remain slightly raised from
the wall as your handset will sit on these screws. Ideally, your handset should sit
ush with the wall.
c. Insert the screw plugs into the drilled holes and screw in the screws.
d. Run wiring along the desired route from your Handset to your Doorbell.
The cable may need to be secured depending on location.
e. Connect your Handset to your Doorbell using the 4 pin connector on your cable.
90mm
1
2
3
4
A

7
After Sales Support
1300 663 907 Model Number HE414114
[e-mail]
Accessories
A door or gate unlocking mechanism (not included) can be connected to remotely
unlock a door or gate for visitors using the 2 pin connection plug. This product is
compatible with a 12V Fail-secure type electric strike.
Using Your Product
When the door bell is pressed the camera and microphone will activate and the
doorbell will ring. You will now be able to view your visitor on the monitor. To talk to
your visitor, lift the Handset. If you have a fail-secure lock attached to your system,
you can press the button to remotely unlock the door/gate.
You can discreetly check who is at your door anytime by pushing the button to
start viewing from the camera.
You can adjust the image on the monitor using the buttons on the right hand side.
Each of the settings has 7 different options, you simply keep pressing the button
until you have the best picture.
- Brightness Control
- Contrast Control
- Colour Control

8
After Sales Support
1300 663 907
Model Number HE414114
[e-mail]
Troubleshooting Guide
Problem Solution
No sound or
hard to hear
the visitor
• Is the Handset plugged into the Monitor’s base unit
correctly?
• Is the Handset properly connected to the Doorbell?
• Are all of the wires in the Handset connected
correctly?
• Ask the visitor to speak closer to the doorbell unit.
My door lock
won’t unlock
when I press the
button
• Ensure you are using a 12V “Fail-Secure” type of lock. If
your lock is a “Fail-Safe” lock, it will unfortunately not be
compatible.
Where can
I place the
doorbell unit?
• As the unit is not waterproof, it is always recommended
to place it under an eave, or where it will have some
cover from rain and other elements.
If you are still having difculties, check that everything is properly installed
as per the installation instructions.
Repair and Refurbished Goods
or Parts Notice
Unfortunately, from time to time, faulty products are manufactured which need to be returned
to the Supplier for repair.
Please be aware that if your product iscapable of retaining user-generated data (such as files
stored on a computer hard drive, telephone numbers stored onamobile telephone, songs
stored on a portable media player, games saved onagames console or files stored ona USB
memory stick) during the process of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to sending theproduct for repair.
You should also be aware that rather than repairing goods, we may replace them with
refurbished goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used where they
meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your
complaint. Please telephone us on 1300 663 907 or write to us at:
Winplus Australasia
PO BOX 537
Bayswater Business Centre
Bayswater, VIC 3153
Winplus Help Desk 1300 663 907
(Operating Hours: Mon-Fri 08:30AM to 6:00PM)
[email protected]
www.winplus.com.au
Door Intercom System with 2.4” Colour LCD
AFTER SALES SUPPORT
MODEL: HE414114 PRODUCT CODE: 49100 02/2015
[e-mail] YEAR WARRANTY
1
1300 663 907
AUS

Repair and Refurbished Goods
or Parts Notice
Unfortunately, from time to time, faulty products are manufactured which need to be returned
to the Supplier for repair.
Please be aware that if your product iscapable of retaining user-generated data (such as files
stored on a computer hard drive, telephone numbers stored onamobile telephone, songs
stored on a portable media player, games saved onagames console or files stored ona USB
memory stick) during the process of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to sending theproduct for repair.
You should also be aware that rather than repairing goods, we may replace them with
refurbished goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used where they
meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your
complaint. Please telephone us on 1300 663 907 or write to us at:
Winplus Australasia
PO BOX 537
Bayswater Business Centre
Bayswater, VIC 3153
Winplus Help Desk 1300 663 907
(Operating Hours: Mon-Fri 08:30AM to 6:00PM)
[email protected]
www.winplus.com.au
Door Intercom System with 2.4” Colour LCD
AFTER SALES SUPPORT
MODEL: HE414114 PRODUCT CODE: 49100 02/2015
[e-mail] YEAR WARRANTY
1
1300 663 907
AUS

Notes

Notes