Coemar Otello HD FullSpectrum User manual

Otello HD
FullSpectrum

2
Please note in the space provided above the relative service information of the model and the retailer from whom
you purchased your Otello HD FullSpectrum: this information will assist us in providing spare parts, repairs or in
answering any technical enquiries with the utmost speed and accuracy.
WARNING: the security of the fixture is granted only if these instructions are strictly followed; therefore it is
absolutely necessary to keep this manual.
User Manual version 2.1
Edition February 2020
Serial Number:
...................................................................................................................................................................................................
Purchase date:
...................................................................................................................................................................................................
Dealer:
...................................................................................................................................................................................................
Address:
...................................................................................................................................................................................................
Suburb:
...................................................................................................................................................................................................
Country:
...................................................................................................................................................................................................
Phone / Fax:
...................................................................................................................................................................................................
Otello HD
FullSpectrum

3
Index
1. Packaging and transportation.................................................................................................................................Pag. 4
1.1 Packaging............................................................................................................................................................Pag. 4
1.2 Transportation....................................................................................................................................................Pag. 4
2. General information................................................................................................................................................Pag. 4
2.1 Safety informations...........................................................................................................................................Pag. 4
2.2 Warranty conditions..........................................................................................................................................Pag. 5
2.3 EC Norms .........................................................................................................................................................Pag. 5
3. Product specifications............................................................................................................................................ Pag. 6
3.1 Technical characteristics - Otello 6.................................................................................................................Pag. 6
3.2 Technical characteristics - Otello 8................................................................................................................Pag. 6
4. Projector dimensions ............................................................................................................................................ Pag. 7
4.1 Otello 6...............................................................................................................................................................Pag. 7
4.2 Otello 8..............................................................................................................................................................Pag. 7
4.3 Unit’s main components..................................................................................................................................Pag. 8
4.4 Back panel description.....................................................................................................................................Pag. 9
5. Installation............................................................................................................................................................. Pag. 10
5.1 Mechanical installation................................................................................................................................... Pag. 10
5.2 Safety chain.................................................................................................................................................... Pag. 10
5.3 Adjusting the unit tilt...................................................................................................................................... Pag. 10
6. Powering up............................................................................................................................................................. Pag. 11
6.1 Operating voltage and frequency .................................................................................................................. Pag. 11
6.2 Connection to mains power............................................................................................................................ Pag. 11
7. Control signal connections................................................................................................................................... Pag. 12
7.1 Control signal connection by XLR5 plugs ..................................................................................................... Pag. 12
8. Turning the projector on....................................................................................................................................... Pag. 13
8.1 DMX address of the unit (motorized zoom version) ................................................................................... Pag. 13
9. DMX Chart ............................................................................................................................................................ Pag. 14
9.1 DMX chart 17, 8 channels (motorized zoom version) ................................................................................. Pag. 14
9.2 DMX chart Studio mode (motorized zoom version) ................................................................................... Pag. 17
9.3 DMX chart RGB mode (motorized zoom version) .................................................................................... Pag. 18
9.4 DMX chart 16, 7, 1 channels (manual / P.O. version) ............................................................................... Pag. 20
9.5 DMX chart Studio mode (manual / P.O. version) ...................................................................................... Pag. 23
9.6 DMX chart RGB mode (manual / P.O. version) ........................................................................................ Pag. 24
10. Display panel functions..................................................................................................................................... Pag. 25
10.1 Quick guide to menu.................................................................................................................................... Pag. 25
10.2 Rapid count................................................................................................................................................... Pag. 25
10.3 Main functions menu................................................................................................................................... Pag. 26
10.4 Measure ....................................................................................................................................................... Pag. 28
10.5 Color presets ............................................................................................................................................... Pag. 30
10.6 Special functions of the fixture................................................................................................................... Pag. 33
10.7 Error messages............................................................................................................................................. Pag. 33
11. Maintenance......................................................................................................................................................... Pag. 34
11.1 Firmware update............................................................................................................................................ Pag. 34
11.2 Periodic cleaning........................................................................................................................................... Pag. 34
11.3 Periodic controls........................................................................................................................................... Pag. 34
11.4 Fuses.............................................................................................................................................................. Pag. 34
12. F.A.Q. and answers.............................................................................................................................................. Pag. 35

4
Congratulations on having purchased a Coemar product. You have assured yourself of a fixture of the highest
quality, both in componentry and in the technology used. We renew our invitation to you to complete the service
information on the previous page, to expedite any request for service information or spares (in case of problems
encountered either during, or subsequent to, installation). This information will assist in providing prompt and
accurate advice from your Coemar service centre. Following the instructions and procedures outlined in this
manual will ensure the maximum eciency of this product for years to come.
1. Packaging and transportation
1.1 Packaging
Open the packaging and make sure that no part of the equipment has suered any damage during the
transportation. In case of damage to the fixture, contact your currier and your supplier immediately by telephone,
fax or e-mail, and inform them you will formally notify them in writing through registered letter.
Packing list
Ensure the packaging contains:
1 Otello HD FullSpectrum
1 Instruction manual
1 Main power plugs
2. General information
2.1 Safety informations
Fire prevention:
1. Never locate the fixture on any flammable surface.
2. Minimum distance from flammable materials: 0,5 m.
3. Minimum distance from the closet illuminable surface: 0,5 m.
4. Replace any blown or damaged fuse only with those of identical values. Refer to the sche-
matic diagram if there is any doubt.
5. Connect the projector to mains power protected by a thermal magnetic circuit breaker.
Prevention from electric shock:
1. Presence of high voltage inside of the fixture. Insulate the projector from mains supply be-
fore opening or performing any function which involves touching the inside of the fixture,
including lamp replacement.
2. For the connection to the mains, adhere strictly to the guidelines outlined in this manual.
1.2 Transportation
The Otello HD FullSpectrum should be transported in either its original packaging or in an appropriate flight
case.

5
Safety:
1. The projector must always be installed with bolts, clamps, or other fixing devices which are
suitably rated to support the weight of the projector.
2. Always use a secondary safety fixing device with chain or steel wire of a suitable rating to
sustain the weight of the unit in case of failure of the principal fixing point.
3. The external surfaces of the unit, at various points, may reach 60°C. Never handle the unit
until at least 10 minutes have elapsed since the LED was turned o.
4. Never install the fixture in an enclosed area lacking sucient air flow; the room temperature
must not exceed 35°C.
5. The projector contains electronic and electrical components which must under no circum-
stances be in contact with water, oil or any other liquid. Failure to do so will compromise the
proper functioning of the projector.
2.2 Warranty conditions
1. The fixture is under warranty for 36 months from the purchase date against factory defections.
2. Damage ought to unskillfulness, inappropriate use, or lack of suggested maintenance are excluded from the
warranty.
3. Warranty expires when the projector is opened by unauthorized personnel.
4. Warranty doesn’t include the replacement of the fixture.
5. Serial number and model of the fixture are necessary to retrieve informations and assistance from the
dealer.
2.3 EC Norms
The projector meets all fundamental applicable EC requirements.
3. The level of technology of Otello HD FullSpectrum requires the use of specialised person-
nel for all service applications; refer all work to your authorised Coemar service centre.
4. A good earth connection is essential for the proper functioning of the projector. Never con-
nect the fixture if there is no earth connection.
5. Mains cables must not come into contact with other cables.
6. Do not operate the projector with wet hands or in an area where water is present.
7. The fixture must never be located in an exposed position, or in areas of extreme humidity.

6
3. Product specifications
3.1 Technical characteristics - Otello 6
3.2 Technical characteristics - Otello 8
Power supply 90-264 V, auto-sensing, 50/60 Hz
Maximum current 0.98 A a 230 V - 1.86 A a 115 V
Power factor Cosφ= 0.93 min.
Max power consumption 210 W
Color temperature Red, Green, Blue, Cyan, Lime, Amber color mixing
CCT from 2.700 to 6.500 K
Color Rendering Index (CRI) Avg. > 95
Weight 9.5 Kg (20.94 lbs)
Maximum ambient temperature +35°C / +95°F
IP rating 20
Power supply 80-264 V, auto-sensing, 50/60 Hz
Maximum current 1.57 A a 230 V - 3.02 A a 115 V
Power factor Cosφ= 0.94 min.
Max power consumption 340 W
Color temperature Red, Green, Blue, Cyan, Lime, Amber color mixing
CCT from 2.700 to 6.500 K
Color Rendering Index (CRI) Avg. > 95
Weight 13.5 Kg (29.76 lbs)
Maximum ambient temperature +35°C / +95°F
IP rating 20

7
4. Projector dimensions
4.1 Otello 6
4.2 Otello 8
*motorized zoom version
*motorized zoom version

8
4.3 Unit’s main components
Components description
AAdjustable yoke
BYoke locking handle
CFresnel lens
DColor frame holder
A
B
C
D

9
4.4 Back panel description
Display
Menu button
/ Enter button
Back button
PowerCon In
PowerCon Out
Plus button
Minus button
DMX Out
DMX In
Exit button
Color preset button

10
5. Installation
5.1 Mechanical installation
Otello HD FullSpectrum may be hung from an appropriate structure in any position or on tripod. If hanging
the fixture from a lighting truss or similar, we recommend the use of an appropriate clamp “A”, as shown in the
following diagram.
Warning!!
Always ensure that your support structure
and fixing (bolts, clamps, etc…) are rated
A to support the weight of the fixture.
5.2 Safety chain
When hanging it is recommended to use a safety chain, as required by current legislation. The safety chain must
pass through the handles of the unit and then attached to the structure.
If using steel cables and chains not ’s production, make sure they are suitable to support the weight of the unit
according to normative UL/ETL (required: the weight of 6 complete devices for at least one hour).
5.3 Adjusting the unit tilt
In order to adjust the tilt of the unit simply loose the side handle adjust the tilt and lock the yoke by tightening
the handle again.
A

11
6. Powering up
6.2 Connection to mains power
Mains cable characteristics
The mains cable provided is thermally resistant, complying to the most recent International standards.
Note: in case of cable replacement, similar cable with comparable thermal resistant qualities must be used ex-
clusively (cable 3 X 1,5 ø external 10 mm, rated 300/500 V, tested to 2 KV, operating temperature -40°C +
180°C, Coemar cod. CV5311).
Connection to mains power
Otello HD FullSpectrum is equipped with two power connectors, one as input and one as output, which can be
used to feed up to 8 (at 230 V) or 4 (at 115 V) fixtures.
The max absorption of Otello HD FullSpectrum is reported in the following table:
Otello 6 - 230 V - 0.98 A constant during normal exercise.
- 115 V - 1.86 A constant during normal exercise.
Otello 8 - 230 V - 1.57 A constant during normal exercise.
- 115 V - 3.02 A constant during normal exercise.
6.1 Operating voltage and frequency
The unit may operates at voltages ranges from 80 to 264 V at a frequency of 50 or 60 Hz. It is not needed to
eect any setup procedures: Otello HD FullSpectrum will automatically adjust its operation to suit any fre-
quency or voltage within this range.
brown
blue
yellow/green
neutral
mass
fase

12
Warning!!
• The use of a thermal/magnetic circuit breaker is recommended. Strict adherence to regulatory norms
is strongly recommended.
• Otello HD FullSpectrum should not be powered through a dimmer as this may damage the internal
switching power supply.
• Prior to connecting the device to mains power, ensure that the mains characteristics are within the
recommended range for the use of Otello HD FullSpectrum.
• All cabling and connections should be carried out by a suitably qualified personnel.
Warning!
Make sure that screening and conductors are not in contact one another or with the
metal housing of the connector.
Pin#1 and housing must never be connected to the power supply unit.
7.1 Control signal connection by XLR5 plugs
The digital control signal is transmitted to the projector via a two pole cable screened in according to the Inter-
national standards for DMX 512 data transmission. The connection must be serial, using connectors XLR5 male
and female located on the back of Otello HD FullSpectrum labelled DMX512 IN e OUT.
7. Control signal connections

13
8. Turning the projector on
After having followed the preceding steps described, proceed with the power supply and turn on the projector
connecting it to the mains power.
The software version installed on the internal microprocessors will be shown on the display, suddenly it will show
the current DMX addressing. If the address blinks, it means that the DMX signal has not been received. Check
the connection cable and the mixer functioning.
8.1 DMX address of the unit (motorized zoom version)
Each projector can use 17 / 8 address channels and Studio / RGB mode for its complete operation and is con-
trolled by a DMX 512 signal.
DMX addressing
When powered up initially, each projector will show A001, which indicates DMX address 001; for example,
when set at 17 channels a projector thus addressed will respond to commands of channel 1 to 17 from your DMX
512 controller. A second unit must be addressed as A0018, a third one as A035 and so on. The operation must
be carried out on every Otello HD FullSpectrum which has an address dierent from A001.
Altering the DMX address:
1. Press the + or – button until the display shows the required DMX address. The digits on the display will blink
to indicate that the variation has not been registered.
2. Press the enter key to confirm your selection. The digits on the display panel will cease to blink and the
projector will now respond to the new address.
Note: by holding the + or – button down the scrolling will be faster; thus allowing a faster selection
Warning!!
If you alter the DMX address with no DMX signal connected, the digits on the display
panel will continue to flash even after you have pressed ENTER button to confirm the
address.
A001
DMX address

14
9. DMX chart
9.1 DMX chart 17, 8 channels (motorized zoom version)
channel function type of control eect decimal percentage
17 8
1 1 master dimmer proportional adjust luminous output intensity from 0 to 100% 0 - 255 0% - 100%
2 2 red proportional proportional control of the color
percentage from 0 % to 100 % 0 - 255 0% - 100%
3 3 green proportional proportional control of the color
percentage from 0 % to 100 % 0 - 255 0% - 100%
4 4 blue proportional proportional control of the color
percentage from 0 % to 100 % 0 - 255 0% - 100%
5 5 cyan proportional proportional control of the color
percentage from 0 % to 100 % 0 - 255 0% - 100%
6 6 lime proportional proportional control of the color
percentage from 0 % to 100 % 0 - 255 0% - 100%
7 7 amber proportional proportional control of the color
percentage from 0 % to 100 % 0 - 255 0% - 100%
8 - strobe eect
step no eect 0 - 9 0% - 4%
proportional variable speed strobing eect, from slow to fast 10 -57 4% - 22%
step stop strobe 58 - 59 23% - 23%
proportional sequenced pulse eect, slow closing, fast opening
(variable speed pulsing, from slow to fast) 60 - 108 24% - 42%
step stop strobe 109 -110 43% - 43%
proportional sequenced pulse eect, fast closing, slow opening
(variable speed pulsing, from slow to fast) 111 - 159 44% - 62%
step stop strobe 160 - 161 63% - 63%
proportional random strobe eect with variable speed
from slow to fast 162 -207 64% - 81%
step stop strobe 208 - 209 82% - 82%
proportional random strobe eect with variable speed
from slow to fast 210 - 255 82% - 100%
9 - dimmer fine proportional fine dimmer control 16 bit 0 - 255 0% - 100%
10 -special functions
step
no eect 0 - 9 0% - 4%
no eect 10 - 22 4% - 9%
reset of all the motors (only once) 23 - 35 9% - 14%
no eect 36 - 48 14% - 19%
fan at low-noise speed 49 -61 19% - 24%
fan at studio speed 62 -74 24% - 29%
fan at auto-silent speed 75 - 87 29% - 34%
proportional fan speed control 88 - 100 35% - 39%
step
enables the automatic display blackout 101 - 113 40% - 44%
disables the automatic display blackout 114 - 126 45% - 49%
no eect 127 - 255 50% - 100%

15
111-red tone step
no eect 0 - 9 0% - 4%
R24 - Scarlet red 10 - 34 4% - 13%
R02 - Bastard amber 35 - 59 14% - 23%
R313 - Light relief yellow 60 - 84 24% - 33%
R18 - Flame 85 - 109 33% - 43%
R331 - Shell pink 110 - 134 43% - 53%
R25 - Orange red 135 - 159 53% - 62%
R46 - Magenta 160 - 184 63% - 72%
R08 - Pale gold 185 - 209 73% - 82%
R27 - Medium red 210 - 234 82% - 92%
R318 - Mayan sun 235 - 255 92% -100%
121-green tone step
no eect 0 - 9 0% - 4%
R4460 - Calcolor 60 green 10 - 34 4% - 13%
R2004 - Storaro green 35 - 59 14% - 23%
E730 - Liberty green 60 - 84 24% - 33%
E088 - Lime green 85 - 109 33% - 43%
R90 - Kelly green 110 - 134 43% - 53%
R395 - Teal green 135 - 159 53% - 62%
R91 - Primary green 160 - 184 63% - 72%
R393 - Emerald green 185 - 209 73% - 82%
R393 - Leaf green 210 - 234 82% - 92%
R86 - Pea green 235 - 255 92% -100%
131-blue tone step
no eect 0 - 9 0% - 4%
R2008 - Storaro indigo 10 - 34 4% - 13%
E5058 - French lilac 35 - 59 14% - 23%
R369 - Tahitian blue 60 - 84 24% - 33%
R347 - Belladonna rose 85 - 109 33% - 43%
R381 - Baldassari blue 110 - 134 43% - 53%
R57 - Lavander 135 - 159 53% - 62%
R55 - Lilac 160 - 184 63% - 72%
R4790 - Calcolor 90 magenta 185 - 209 73% - 82%
R92 - Turquise 210 - 234 82% - 92%
R370 - Italian blue 235 - 255 92% -100%
14 - white tone
step no eect 0 - 9 0% - 4%
2.700 K 10 -24 4% - 9%
proportional proportional value from 2.700 K to 3.200 K 25 - 39 10% - 15%
step 3.200 K 40 - 54 16% - 21%
proportional proportional value from 3.200 K to 4.000 K 55 - 69 22% - 27%
step 4.000 K 70 - 84 27% - 33%
proportional proportional value from 4.000 K to 5.000 K 85 - 99 33% - 39%
step 5.000 K 100 - 114 39% - 45%
proportional proportional value from 5.000 K to 5.600 K 115 - 129 45% - 51%
step 5.600 K 130 - 144 51% - 56%
proportional proportional value from 5.600 K to 7.000 K 145 - 159 57% -62%
step 7.000 K 160 - 174 63% - 68%
proportional proportional value from 7.000 K to 8.000 K 175 - 189 69% - 74%
step 8.000 K 190 - 204 75% - 80%
proportional proportional value from 8.000 K to 9.000 K 205 - 219 80% - 86%
step 9.000 K 220 - 234 86% - 92%
proportional proportional value from 9.000 K to 10.000 K 235 - 249 92% - 98%
step 10.000 K 250 - 255 98% - 100%

16
152-green saturation
step no eect 0 0%
proportional exalts the green color in the mixing and diminishes the
presence of magenta 1 - 127 0% - 20%
step no eect 128 50%
proportional diminishes the presence of green in the mixing and exalts
the magenta color 129 - 254 51% - 99%
step no eect 255 100%
163-saturation proportional the white tone fades to the tone built with
the RGBCLA channels 0 - 255 0% - 100%
17 8 zoom proportional proportional control of zoom from narrow to wide beam 0 - 255 0% - 100%
Note 1: channels involving 11 - 12 - 13 macro colors can also be obtained by mixing channels 2 - 3 - 4 - 5 - 6 - 7.
Note 2: the rest position of the green saturation is 128. Diminishing the DMX value augments the presence of the green color. Increasing the DMX
value augments the presence of magenta.
Note 3: increasing the value of the saturation DMX channel the white tone (channel 14) will fade to the color selected by the channel 2 - 3 - 4 - 5
- 6 - 7.

17
9.2 DMX chart Studio mode (motorized zoom version)
channel function type of control eect decimal percentage
1master dimmer proportional adjust luminous output intensity from 0 to 100% 0 - 255 0% - 100%
2white tone
step 2.700 K 0 - 24 0% - 9%
proportional proportional value from 2.700 K to 3.200 K 25 - 39 10% - 15%
step 3.200 K 40 - 54 16% - 21%
proportional proportional value from 3.200 K to 4.000 K 55 - 69 22% - 27%
step 4.000 K 70 - 84 27% - 33%
proportional proportional value from 4.000 K to 5.000 K 85 - 99 33% - 39%
step 5.000 K 100 - 114 39% - 45%
proportional proportional value from 5.000 K to 5.600 K 115 - 129 45% - 51%
step 5.600 K 130 - 144 51% - 56%
proportional proportional value from 5.600 K to 7.000 K 145 - 159 57% -62%
step 7.000 K 160 - 174 63% - 68%
proportional proportional value from 7.000 K to 8.000 K 175 - 189 69% - 74%
step 8.000 K 190 - 204 75% - 80%
proportional proportional value from 8.000 K to 9.000 K 205 - 219 80% - 86%
step 9.000 K 220 - 234 86% - 92%
proportional proportional value from 9.000 K to 10.000 K 235 - 249 92% - 98%
step 10.000 K 250 - 255 98% - 100%
31green saturation
step no eect 0 0%
proportional exalts the green color in the mixing and diminishes the
presence of magenta 1 - 127 0% - 20%
step no eect 128 50%
proportional diminishes the presence of green in the mixing and exalts
the green color 129 - 254 51% - 99%
step no eect 255 100%
42saturation proportional the white tone fades to the tone built with the HUE channel 0 - 255 0% - 100%
5hue proportional reproduce the color crossfades around the color space 0 - 255 0% - 100%
6dimmer fine proportional fine dimmer control 16 bit 0 - 255 0% - 100%
7special functions
step
no eect 0 - 9 0% - 4%
no eect 10 - 22 4% - 9%
reset of all the motors (only once) 23 - 35 9% - 14%
no eect 36 - 48 14% - 19%
fan at low-noise speed 49 -61 19% - 24%
fan at studio speed 62 -74 24% - 29%
fan at auto-silent speed 75 - 87 29% - 34%
proportional fan speed control 88 - 100 35% - 39%
step
enables the automatic display blackout 101 - 113 40% - 44%
disables the automatic display blackout 114 - 126 45% - 49%
no eect 127 - 255 50% - 100%
8zoom proportional proportional control of zoom from narrow to wide beam 0 - 255 0% - 100%
Note 2: increasing the value of the saturation DMX channel (channel 4) the white light will fade to the color selected with the HUE channel
(channel 5)

18
9.3 DMX chart RGB mode (motorized zoom version)
channel function type of control eect decimal percentage
1master dimmer proportional adjust luminous output intensity from 0 to 100% 0 - 255 0% - 100%
2dimmer fine proportional fine dimmer control 16 bit 0 - 255 0% - 100%
3red proportional proportional control of the color
percentage from 0 % to 100 % 0 - 255 0% - 100%
4green proportional proportional control of the color
percentage from 0 % to 100 % 0 - 255 0% - 100%
5blue proportional proportional control of the color
percentage from 0 % to 100 % 0 - 255 0% - 100%
61white tone
step no eect 0 - 9 0% - 4%
2.700 K 10 -24 4% - 9%
proportional proportional value from 2.700 K to 3.200 K 25 - 39 10% - 15%
step 3.200 K 40 - 54 16% - 21%
proportional proportional value from 3.200 K to 4.000 K 55 - 69 22% - 27%
step 4.000 K 70 - 84 27% - 33%
proportional proportional value from 4.000 K to 5.000 K 85 - 99 33% - 39%
step 5.000 K 100 - 114 39% - 45%
proportional proportional value from 5.000 K to 5.600 K 115 - 129 45% - 51%
step 5.600 K 130 - 144 51% - 56%
proportional proportional value from 5.600 K to 7.000 K 145 - 159 57% -62%
step 7.000 K 160 - 174 63% - 68%
proportional proportional value from 7.000 K to 8.000 K 175 - 189 69% - 74%
step 8.000 K 190 - 204 75% - 80%
proportional proportional value from 8.000 K to 9.000 K 205 - 219 80% - 86%
step 9.000 K 220 - 234 86% - 92%
proportional proportional value from 9.000 K to 10.000 K 235 - 249 92% - 98%
step 10.000 K 250 - 255 98% - 100%
7saturation proportional the white tone fades to the tone built with
the RGB channels 0 - 255 0% - 100%
8strobe eect
step no eect 0 - 9 0% - 4%
proportional variable speed strobing eect, from slow to fast 10 -57 4% - 22%
step stop strobe 58 - 59 23% - 23%
proportional sequenced pulse eect, slow closing, fast opening
(variable speed pulsing, from slow to fast) 60 - 108 24% - 42%
step stop strobe 109 -110 43% - 43%
proportional sequenced pulse eect, fast closing, slow opening
(variable speed pulsing, from slow to fast) 111 - 159 44% - 62%
step stop strobe 160 - 161 63% - 63%
proportional random strobe eect with variable speed
from slow to fast 162 -207 64% - 81%
step stop strobe 208 - 209 82% - 82%
proportional random strobe eect with variable speed
from slow to fast 210 - 255 82% - 100%

19
9special functions
step
no eect 0 - 9 0% - 4%
no eect 10 - 22 4% - 9%
reset of all the motors (only once) 23 - 35 9% - 14%
no eect 36 - 48 14% - 19%
fan at low-noise speed 49 -61 19% - 24%
fan at studio speed 62 -74 24% - 29%
fan at auto-silent speed 75 - 87 29% - 34%
proportional fan speed control 88 - 100 35% - 39%
step
enables the automatic display blackout 101 - 113 40% - 44%
disables the automatic display blackout 114 - 126 45% - 49%
no eect 127 - 255 50% - 100%
10 zoom proportional proportional control of zoom from narrow to wide beam 0 - 255 0% - 100%

20
9.4 DMX chart 16, 7, 1 channels (manual / P.O. version)
channel function type of control eect decimal percentage
16 7 1
111 master dimmer proportional adjust luminous output intensity from 0 to 100% 0 - 255 0% - 100%
2 2 - red proportional proportional control of the color
percentage from 0 % to 100 % 0 - 255 0% - 100%
3 3 - green proportional proportional control of the color
percentage from 0 % to 100 % 0 - 255 0% - 100%
4 4 - blue proportional proportional control of the color
percentage from 0 % to 100 % 0 - 255 0% - 100%
5 5 - cyan proportional proportional control of the color
percentage from 0 % to 100 % 0 - 255 0% - 100%
6 6 - lime proportional proportional control of the color
percentage from 0 % to 100 % 0 - 255 0% - 100%
7 7 - amber proportional proportional control of the color
percentage from 0 % to 100 % 0 - 255 0% - 100%
8 - - strobe eect
step no eect 0 - 9 0% - 4%
proportional variable speed strobing eect, from slow to fast 10 -57 4% - 22%
step stop strobe 58 - 59 23% - 23%
proportional sequenced pulse eect, slow closing, fast opening
(variable speed pulsing, from slow to fast) 60 - 108 24% - 42%
step stop strobe 109 -110 43% - 43%
proportional sequenced pulse eect, fast closing, slow opening
(variable speed pulsing, from slow to fast) 111 - 159 44% - 62%
step stop strobe 160 - 161 63% - 63%
proportional random strobe eect with variable speed
from slow to fast (one color) 162 -207 64% - 81%
step stop strobe 208 - 209 82% - 82%
proportional random strobe eect with variable speed
from slow to fast (six colors in alternation) 210 - 255 82% - 100%
9 - - dimmer fine proportional fine dimmer control 16 bit 0 - 255 0% - 100%
10 - - special functions
step
no eect 0 - 9 0% - 4%
no eect 10 - 48 4% - 19%
fan at low-noise speed 49 -61 19% - 24%
fan at studio speed 62 -74 24% - 29%
fan at auto-silent speed 75 - 87 29% - 34%
proportional fan speed control 88 - 100 35% - 39%
step
enables the automatic display blackout 101 - 113 40% - 44%
disables the automatic display blackout 114 - 126 45% - 49%
no eect 127 - 255 50% - 100%