Colgate Blast 2 Series User manual

Cordless
Water Flosser
let's get flossing
User Manual

Your oral health
routine upgraded.
Water Resistant Design
Rechargeable Battery
Keep the flow going with
up to 3 weeks battery life*
Large, easy-to-fill
180 mL water tank
Removable for easy cleaning
Up to 60 seconds
of water capacity*
*when tank is full and used on regular mode.
60s
Interactive LED Display
See your mode & battery life
shine on an easy-to-read display.
Compact,
portable design
Easy to take your flosser
with you on the go

1 2 3 4 5
Personalise your flossing
with nozzles designed
with you in mind.
Regular
nozzle
Interdental
nozzle
Orthodontic
nozzle
An easy clean for those
hard-to-reach areas
around braces
Creates a unique
stream pulse
water flow to blast
away plaque along
the gum line
Change your mode.
Change your flow.
Gentle mode:
A mild water pressure that is suitable for sensitive teeth and first time users.
Regular mode:
A standard water pressure, perfect for your everyday clean.
Deep Clean mode:
A strong water pressure to level up your floss.
Massage mode:
A pulsed water flow to massage the gums, while blasting away plaque.
Spot Spray mode:
Allows you to control the flow of water with the touch of a button to
target stubborn residue areas for a focused precision clean.
Choose from 5 cleaning modes for
a unique flossing experience tailored to you.
Blast away food
residue, bacteria and
plaque between
teeth to combat
tooth decay for a
dentist clean feel

Charging the Water Flosser:
Prior to your first use, it is recommended to fully charge your device.
1. Turn the power OFF on the device.
2. Ensure the water tank is empty.
3. Insert the charging cord into the charging port.
4. Attach the USB end of the cord to the power adapter
and plug into outlet. Confirm that the indicator light is on.
5. Fully charge device prior to use. When charging, the indicator
light flashes green. The flashing stops once the device is fully
charged and it can be used for more than 3 weeks with
daily use on regular mode. The indicator light on your device
flashes red when the battery is low and requires charging.
INSTRUCTIONS:
IMPORTANT SAFEGUARDS:
When using electrical products,
especially when children are present,
basic safety precautions should
always be followed, including the following:
SAVE THESE INSTRUCTIONS
WARNING
Not suitable for children under 8. Keep out of reach of children.
Water flossers can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge under supervision.
Cleaning and user maintenance shall not be made by children
without supervision.
Children shall not play with the appliance.
Water flossers shall be used only with cold or warm water,
or specific solutions as defined in the manufacturers instructions.
READ ALL INSTRUCTIONS BEFORE USING
Stop using this device if it is damaged in any way
(USB cord, water flosser device, and/or nozzles).
Use this product only for its intended use as
described in this manual. Please do not use it
for other purposes.
Do not use nozzles or attachments
not recommended by Colgate.
Do not place the product in a place with
high temperature and direct sunlight.
Keep the cord away from heated surfaces.
Use the charger only within rated capacity of outlets
or voltages specified.
Use only a certified AC adapter or other USB power
source with USB outlet and output voltage rating of
5Vdc and output current rating of at least 300mA.
This product can be used with mouthwash or
dentist’s recommended solution, but after use,
wash the device thoroughly to avoid contamination
of the tank and clogging of internal parts.
Do not add salt, iodine, bleaching agent, or
insoluble essential oils to the tank as these may
affect the product performance and shorten
the product life.
No user serviceable parts. Do not disassemble
the device, as it may cause personal injury or device
failure. This water flosser contains lithium batteries
that are non-replaceable.
If after using this water flosser you experience
excessive bleeding or if bleeding continues to occur
after a week of use, please contact your dentist as it
may be an indication of a more serious oral care issue.
If you are undergoing treatment for any oral care
condition, consult your dental professional prior to use.
Do not place or store product where it can fall or
be pulled into a tub or sink.
Do not reach for a charger that has fallen into water.
Unplug immediately.
AC adapters and chargers should always be
completely dry when connecting to power.
USB power sources must only be used in dry
locations away from water.
Do not charge with water in the tank. Unplug from
charger before filling, do not overfill.
This device contains lithium rechargeable batteries.
When travelling by air, it should be carried in
carry-on baggage when possible. When this device
must be carried in checked baggage, it must be turned
completely off, protected from accidental activation,
and packed so that it is protected from damage.
Do not run the device without water in the tank
to avoid damage to the device.
Do not aim and spray water directly under the
tongue, into eyes, ears, nose, or other parts
of the body. Pressure from the water stream
may cause damage.
Do not use this product if there is any obvious
wound on your tongue or in your mouth.
Remove all jewellery inserts from your mouth
before you use this product.

Filling the Water Tank:
1. Open the water tank cover.
2. Lay the flosser flat, face the opening
towards the faucet and fill with cold/
lukewarm water or mouthwash.
You may use warm water up to 40C/104F.
3. After filling the tank with water, close the
cover firmly, and dry off any excess liquid.
Adjusting the Pressure Settings:
1. Device turns on in the last mode used.
2. Press the mode button to switch between
pressure settings for your preferred flossing style:
Gentle: Low pressure mode.
Regular: Standard pressure mode for daily cleaning.
Deep Clean: Strong pressure mode for deep cleaning.
Massage: pulsation pattern for gum massaging.
Spot Spray mode: Control the flow of water with the
touch of a button. If you have selected spot spray mode,
you can control the flow of water through the On/Off
button. Press and hold the On/Off button for water flow,
and let go to stop water flow.
3. The default mode for the water flosser is gentle,
it is recommended to start on the gentle mode
and gradually increase modes if desired.
Inserting and Removing Nozzles:
1. Remove the nozzle from the package.
2. Insert the nozzle into the nozzle jack
until it clicks into place.
3. To remove the nozzle, press and hold
the 'Smile' nozzle eject button and
gently pull out the nozzle.
Warning:
Do not eject the nozzle during operation.
Using the Water Flosser:
1. Place the nozzle into your mouth before turning the device on.
2. Align the nozzle against your teeth and gum line.
3. Work the nozzle along the gumline, paying special attention
to the area between teeth and around braces.
4. While flossing, open your mouth slightly to avoid water splashing.
5. Keep the flosser upright during use to prevent
the tube in the tank from restricting water flow.
6. T he water tank should allow for up to 60 seconds of flossing depending
on the mode. Refill water tank as needed to complete flossing session.
7. After pressing the off button, the water flosser will remain in standby mode
for 30 seconds. After 30 seconds in standby mode, the water flosser will
turn off. After 2 minutes of flossing, the water flosser will automatically
switch off.

Ensure this device is empty, dried and stored without water after each use.
Place in dry area with no direct exposure to sunlight.
If you plan to stop using the water flosser for an extended period, we recommend
that you fully charge the battery, clean the flosser device and nozzles, and store them
in a cool dark place. If you start using your flosser again, after more than 3 months of
non-use, fully charge the device before use.
This product is covered by a warranty against defects for a period of 2 years from the date of original product purchase
within Australia or New Zealand. This warranty is given by Colgate-Palmolive Australia Pty LTD. In the unlikely event of
failure or defects resulting from faults in materials or manufacturing arising during the warranty period, we will repair,
replace or refund the goods. We will cover the cost of repair, replacement or refund and cover the postage costs
associated with returning the product for assessment, as below. You will be responsible for any other costs associated
with making a claim under this warranty.
To make a claim under this warranty, you must:
- Cease using the product;
- Contact Colgate(R)’s Consumer Information Service on 1800 802 307 (AU) or 0800 411 740 (NZ)
or at www.colgatepalmolive.com.au/contact-us to obtain a reference for your claim.
CLEANING INSTRUCTIONS:
WARRANTY
STORAGE INSTRUCTIONS
AND DEVICE MAINTENANCE
- (In Australia)
Return the goods, along with a copy of your original purchase
receipt showing purchase within 2 years of the current date and
include your reference number, name, address and
telephone/email contact to:
Colgate-Palmolive
Consumer Information Service
Reply Paid 3964
Sydney NSW 2000
(NO POSTAGE REQUIRED)
- (In New Zealand)
Return the goods, along with a copy of your original
purchase receipt showing purchase within 2 years of the
current date and include your reference number, name,
address and telephone number/email contact to:
Colgate-Palmolive
Consumer Information Service
Free Post 55123
PO Box 38077
Wellington Mail Centre
Please note that the benefits provided by this warranty are in addition to other rights and remedies available to you as a
consumer under applicable national laws, including the Australian Consumer Law and the New Zealand Consumer Guarantees Act.
Our goods come with guarantees that cannot be excluded under the Australia Consumer Law.
A) Nozzle
Wash with water, then dry with a soft cloth or paper towel.
It is recommended to replace the nozzle every 6 months.
Please replace if the nozzle tip is deformed to avoid
misuse or malfunction.
B) Device
Make sure power is turned off, detach the charger and seal
the charging port. Open the cover of the tank, pour out
contents and then close. Turn on power to empty out any
remaining contents, then turn off again.
Wipe away any remaining liquid from the device.
C) Water tank
You may also remove the tank if you wish to clean it. To do so,
turn the water flosser upside down and push outwards away
from the device. The first time you remove the water tank
it will require more physical effort. Clean using warm water
and soft cloth or paper towels and fully dry the device.
To return the tank for next use, slide it back until you hear
the click. It is recommended to clean the tank once a week.
D) Tube
This can either be cleaned directly, or it can be removed
completely from the device and washed using a clean damp
cloth and warm water. To remove completely, take the water
tank apart and gently pull the tube from the device. After cleaning,
reinstall the tube into the device and wipe dry with a soft cloth or paper towel.
Please do not bend the tube or it may result in the device malfunctioning.