Collective Minds Switch Up User manual
Switch Up
TM
Manual V1.2
For videos and tutorials and more information about the Switch UpTM device please visit:
https://www.switch-up.ca
WARNING: READ THIS BEFORE
ATTEMPTING TO USE YOUR SWITCH UP
DEVICE
BEFORE YOU CONNECT THE SWITCH UPTM DEVICE TO THE SWITCHTM DOCK, YOU
MUST NAVIGATE TO THE SWITCHTM “SYSTEM SETTINGS” AND SET “PRO
CONTROLLER WIRED COMMUNICATION” TO “ON”. Not doing so will result in an
“Error Code 2011-0301”, requiring you to disconnect the Switch UpTM from the console,
then reboot the SwitchTM, and then change the setting to “ON”. You can now plug in
your Switch UpTM and enjoy without issue.
The “Controller and Sensors” setting for the Pro Controller Wired Communication must
be set to “ON”.
This error will occur if the Pro Controller Wired Communication is set to “OFF”. You are
now required to disconnect the Switch UpTM from the SwitchTM console and then reboot
the SwitchTM console. Now go to the “Controller and Sensors” settings and then from the
Pro Controller Wired Communication option, set it to “ON”.
SWITCH UPTM INITIAL SETUP
INSTRUCTIONS
OVERVIEW
Use the Switch UpTM to play the SwitchTM console with Joy-ConTM/SwitchTM Pro/Wii UTM
Pro/Xbox OneTM/Xbox 360TM/PlayStation 4TM/PlayStation 3TM controllers.
UPDATING YOUR SWITCH UPTM
Before using the Switch UpTM device, it is important to make sure your device is updated.
To do this download the Collective MindsTM Updater software below and use the
application to update your Switch UpTM device to the latest version.
Updater : Windows Version Download Mac Version Download
Updating Steps:
1. Open the update tool
on your computer.
Plug in your Switch UpTM device into an open USB port.
2. Once the Switch UpTM
device is detected,
click on the Device
Name in the Update
Tool.
3. On the Firmware
Selection screen
simply click Continue.
4. Your Switch UpTM is
now ready to be
updated. Click on
Begin Update to start
the process.
5. The Switch UpTM
device will now begin
receiving the latest
update. DO NOT remove your switch device while the update is in progress.
6. When you see
“Update Completed”
you can safely
remove your Switch
UpTM device from your
computer and begin
enjoying it.
MODE ACTIVATION
There are three modes. Standard Mode, Mario Mode, and Zelda Mode. To select modes
simply PRESS & RELEASE the Mode Select button until it turns RED (Mario Mode) or
GREEN (Zelda Mode) or back to WHITE (Standard Mode).
CONNECTING THE SWITCH UPTM AND A CONTROLLER
BEFORE YOU CONNECT THE SWITCH UPTM DEVICE TO THE SWITCHTM DOCK, YOU
MUST NAVIGATE TO THE SWITCHTM “SYSTEM SETTINGS” AND SET “PRO
CONTROLLER WIRED COMMUNICATION” TO “ON”. Not doing so will result in an
“Error Code 2011-0301”, requiring you to disconnect the Switch UpTM, then reboot the
SwitchTM, and then change the setting to “ON”.
The Switch UpTM supports Joy-ConTM/SwitchTM Pro/Wii UTM Pro/Xbox OneTM/Xbox
360TM/PlayStation 4TM/PlayStation 3TM controllers. The SwitchTM will see any controller
you connect to the Switch UPTM device, as a SwitchTM Pro Controller.
With a PlayStation 4TM controller connected to the Switch UpTM, the TOUCHPAD button
acts as the CAPTURE button for the SwitchTM.
WIRED CONTROL: The simplest connection of a controller is through a wired
connection. Simply connect your SwitchTM Pro/Wii UTM Pro/Xbox OneTM/Xbox
360TM/PlayStation 4TM/PlayStation 3TM controller directly to the Switch UPTM with their
respective controller cables. Once you have done this, you can enjoy wired play.
WIRELESS CONTROL:
To use a wireless controller with your Switch UpTM you will have to first pair your wireless
controller with the Switch UpTM device. Each controller has a simple wireless pairing
method as follows. Switch ProTM/Wii UTM Pro/Xbox OneTM/Xbox 360TM/PlayStation
4TM/PlayStation 3TM controllers can be used wirelessly after pairing.
OR
PlayStation 4
TM
Wireless Controller Pairing
- Simply put your
PlayStation 4TM controller into pairing mode and press the
Bluetooth Sync button on your Switch UpTM device. Step by Step
Instructions below.
1. Ensure your Switch UpTM device is plugged into the SwitchTM Dock.
2. Ensure your wireless PlayStation 4TM controller is off.
3. Place your PlayStation 4TM controller into Bluetooth pairing mode by holding the
SHARE and HOME buttons for 5 seconds or until the light bar flashes WHITE.
4. Now press the Bluetooth pairing button on the Switch UpTM device. The LED will
flash BLUE to show Bluetooth pairing has begun.
5. Within a few seconds the LED will be WHITE indicating that pairing is complete.
6. The light bar on the PlayStation 4TM controller should be BLUE and you are now
connected to the Switch UpTM device and ready to use your PlayStation 4TM
controller wirelessly.
PlayStation 3
TM
Wireless Controller Pairing
- Connect the PlayStation 3TM controller via a
wired connection first. Then remove the wired connection and your PlayStation 3TM
controller will automatically pair to Switch UpTM device. Step by
Step Instructions below.
1. Ensure your Switch UpTM device is plugged into the
SwitchTM Dock.
2. Plug your PlayStation 3TM controller into your Switch UpTM
device. The Player LED indicator on your PlayStation 3TM
controller will light up.
3. Now remove the wired connection, and your PlayStation 3TM controller Player LED
indicators will begin to flash.
4. After a few seconds only one Player LED indicator will light up.
5. You are now connected to the Switch UpTM device and ready to use your
PlayStation 3TM controller wirelessly.
Xbox One
TM
Wireless Bluetooth Controller Pairing
- Simply put your XboxTM controller into
sync mode and press the Bluetooth Sync button on your Switch UpTM device. Step by
Step Instructions below.
1. Ensure your Switch UpTM device is plugged into the
SwitchTM Dock.
2. Turn on your Xbox OneTM Wireless Bluetooth Controller.
3. Press the SYNC button on your controller.
4. Now press the Bluetooth pairing button on the Switch UpTM device. The LED will
flash BLUE to show Bluetooth pairing has begun.
5. Within 30 seconds the LED will be WHITE on the Switch UpTM device and the
Xbox OneTM Wireless Bluetooth Controller will vibrate indicating that pairing is
complete.
6. You are now connected to the Switch UpTM device and ready to use your Xbox
OneTM Bluetooth Controller wirelessly.
7. If your controller is not connected, remove the batteries then re-insert them and
repeat the process above.
Xbox One
TM
Wireless Controller Pairing
- To connect a
non-bluetooth Xbox OneTM controller you must use an Xbox
OneTM Wireless Adapter (sold separately). Connect the Xbox
OneTM controller via a wired connection first. Then remove the
wired connection and plug the Xbox OneTM Wireless Adapter
into your Switch UpTM device. Step by Step Instructions below.
1. Ensure your Switch UpTM device is plugged into the
Switch Dock.
2. Plug your Xbox OneTM controller into your Switch UpTM device. It will vibrate to
indicate it is paired to your Switch UpTM device.
3. Now remove the wired connection, and your Xbox OneTM controller HOME button
will begin to flash.
4. Insert the Xbox OneTM Wireless Adapter.
5. Within a few seconds the Xbox OneTM Wireless Adapter LED will go WHITE and
your Xbox OneTM Wireless Controller HOME button will stay solid indicating that
pairing is complete.
6. You are now connected to the Switch UpTM device and ready to use your Xbox
OneTM controller wirelessly.
7. If your controller is not connected, remove the batteries then re-insert them and
repeat the process above.
Xbox 360
TM
Wireless Controller Pairing
- To connect a Xbox 360TM Wireless
Controller you must use an Xbox 360TM Wireless Gaming Receiver (sold
separately). Connect the Xbox 360TM Wireless Gaming Receiver to the Switch
UpTM device. Now sync with your Xbox 360TM Wireless Controller. Step by Step
Instructions below.
1. Ensure your Switch UpTM device is plugged into the SwitchTM Dock.
2. Plug your Xbox 360TM Wireless Gaming Receiver into your Switch UpTM device.
3. Turn on your Xbox 360TM Wireless Controller.
4. Press the SYNC button on your Xbox 360TM Wireless Controller until the HOME
button begins flashing.
5. Now press the SYNC button on the Wireless Gaming Receiver.
6. Within a few seconds the Xbox 360TM Wireless Controller HOME button will stay
solid indicating that pairing is complete.
7. You are now connected to the Switch UpTM device and ready to use your Xbox
360TM controller wirelessly.
Switch
TM
Pro Wireless Controller Pairing
- Simply put your SwitchTM Pro Controller into
sync mode and press the Bluetooth Sync button on your Switch
UpTM device. Step by Step Instructions below.
1. Ensure your Switch UpTM device is plugged into the
SwitchTM Dock.
2. Ensure your wireless SwitchTM Pro Controller is off.
3. Place your SwitchTM Pro Controller into Bluetooth pairing
mode by pressing the SYNC button at the top for a few
seconds.
4. The player indicators at the bottom of the SwitchTM Pro Controller will now begin
to cycle.
5. Now press the Bluetooth pairing button on the Switch UpTM device. The LED will
flash BLUE to show Bluetooth pairing has begun.
6. Within a few seconds the LED on the Switch UpTM device will be WHITE indicating
that pairing is complete.
7. The player indicators on the SwitchTM Pro Controller will light up one player
indicator LED.
8. You are now connected to the Switch UpTM device and ready to use your SwitchTM
Pro Controller wirelessly.
Wii U
TM
Pro Wireless Controller Pairing
- Simply put your Wii U
Pro controller into sync mode and press the Bluetooth Sync
button on your Switch UpTM device. Step by Step Instructions
below.
1. Ensure your Switch UpTM device is plugged into the
SwitchTM Dock.
2. Ensure your wireless Wii UTM Pro Controller is off.
3. Place your Wii UTM Pro Controller into Bluetooth pairing mode by pressing the
SYNC button at the back for a few seconds.
4. The player indicators at the bottom of the Wii UTM Pro Controller will now begin to
cycle.
5. Now press the Bluetooth pairing button on the Switch UpTM device. The LED will
flash BLUE to show Bluetooth pairing has begun.
6. Within a few seconds the LED on the Switch UpTM device will be WHITE indicating
that pairing is complete.
7. The player indicators on the Wii UTM Pro Controller will light up one player
indicator LED.
8. You are now connected to the Switch UpTM device and ready to use your Wii UTM
Pro Controller wirelessly.
Joy-Con
TM
Wireless Controller Pairing
- Simply put your
Joy-ConTM controller into sync mode and press the Bluetooth
Sync button on your Switch UpTM device. Step by Step
Instructions below.
1. Ensure your Switch UpTM device is plugged into the
SwitchTM Dock.
2. Ensure both Joy-ConTM controllers are off.
3. Place your LEFT Joy-ConTM controller into Bluetooth pairing mode by pressing
the SYNC button until the player LED’s on it begin to cycle.
4. Now press the Bluetooth pairing button on the Switch UpTM device. The LED will
flash BLUE to show Bluetooth pairing has begun.
5. Within a few seconds the LED on the Switch UpTM device will be WHITE indicating
that pairing is complete and you will feel a strong vibration on the LEFT Joy-ConTM
controller.
6. The player indicators on the Joy-ConTM controller will light up one player indicator
LED.
7. Place your RIGHT Joy-ConTM controller into Bluetooth pairing mode by pressing
the SYNC button until the player LED’s on it begin to cycle.
8. Now press the Bluetooth pairing button on the Switch UpTM device. The LED will
flash BLUE to show Bluetooth pairing has begun.
9. Within a few seconds the LED on the Switch UpTM device will be WHITE indicating
that pairing is complete and you will feel a strong vibration on the RIGHT
Joy-ConTM controller.
10. The player indicators on the Joy-ConTM controller will light up one player indicator
LED.
11. You are now connected to the Switch UpTM device and ready to use your
Joy-ConTM controllers.
12. If your Joy-ConTM controller player indicators do not all match the player indicator
on the Switch UpTM device then repeat steps 1 - 11.
OPTIONAL BUTTON SWAP:
You can globally swap all 4 face buttons to follow the familiar button geography of
XboxTM/PlayStationTM and you can see exactly how to do it in the table below. If you are
accustomed to an XboxTM controller, this ensures an in game A button prompt will be the
A button on the controller, etc. Swap is also helpful for PlayStationTM and SwitchTM
controllers, when you are used to your back menu button being geographically the east
face button.
Some games are more playable with swap than others; it depends on what the original
buttons for the various in game actions are.
IMPORTANT NOTE:
REMEMBER THAT THIS IS A GLOBAL BUTTON SWAP.
EVERYTHING WILL BE SWAPPED - ALL CONTROLLER TYPES, SWITCH UP
TM
MODES
AND MODS WILL BE SWAPPED AS A RESULT! EVEN IF YOU UNPLUG AND PLUG IN
THE SWITCH
TM
IT WILL REMAIN SWAPPED UNTIL YOU CHANGE THE SWAP MODE
BACK.
MOD
INFO
Switch Button Swap
While using SwitchTM Joy-ConTM/SwitchTM Pro/Wii UTM Pro
controllers: A-B X-Y can be swapped once you connect
your controller to the Switch UpTM. To SWAP to A=B B=A
X=Y Y=X, HOLD PLUS & B button for at least 3 seconds.
To RESET to DEFAULT A=A B=B X=X Y=Y, HOLD PLUS &
A button for at least 3 seconds.
Xbox Button Swap
While using XboxTM controllers: A-B X-Y can be swapped
once you connect your controller to the Switch UpTM. To
SWAP to A=A B=B X=X Y=Y, HOLD MENU & A button for
at least 3 seconds. To RESET to DEFAULT A=B B=A X=Y
Y=X, HOLD MENU & B button for at least 3 seconds.
PlayStation Button Swap
While using PlayStationTM controllers: A-B X-Y can be
swapped once you connect your controller to the Switch
UpTM. To SWAP to ✖=A ⬤=B ⬛=X ▲=Y, HOLD
OPTIONS & CROSS button for at least 3 seconds. To
RESET to DEFAULT ✖=B ⬤=A ⬛=Y ▲=X, HOLD
OPTIONS & CIRCLE button for at least 3 seconds.
MARIO MODE CONTROLS
OVERVIEW
The Switch UpTM Mario Mode comprises several Super Mario OdysseyTM mods to
streamline the trickier areas of the in game controls, with mods such as EASY DIVE,
EASY HATTY, EASY SWIM, and GROUND POUND +.
Significantly cut out grinding for coins and moons to unlock content with COIN/MOON
GENERATORS, and beat down bosses with AUTO BOSS BATTLE, so that you can focus
on experiencing and enjoying the game as one seamless experience.
Take advantage of a simple to use menu system with classic style button codes to toggle
the various mods.
Use the Switch UpTM device to play Mario with Joy-ConTM/SwitchTM Pro/WiiTM U Pro/Xbox
OneTM/Xbox 360TM/PlayStation 4TM/PlayStation 3TM controllers.
ACTIVATION
You must first select Mario Mode. PRESS & RELEASE the Mode Select button until it
turns RED. You are now in Mario Mode.
MASTER QUICK CONTROL
MASTER QUICK CONTROL will SUSPEND/RESUME MODS for situations where you
might need NO MODS in a hurry.
MASTER QUICK CONTROL - SUSPEND/RESUME ALL MODS
SUSPEND/RESUME ALL MODS: HOLD LEFT D-Pad & TAP PLUS button (XB: VIEW /
PS: OPTIONS) at the same time. (Suspended: HEAVY rumble and Mode Select
PURPLE LED indicator / Resumed: LIGHT rumble and Mode Select RED LED
indicator).
MASTER RESET
MASTER RESET will RESET ALL MODS to their default state and button map for
situations where you have lost track of what you have toggled ON.
ENTER MENU MODE - HOLD the MINUS button (XB: VIEW / PS: SHARE) until the Mode
Select LED turns WHITE. Proceed to RELEASE the MINUS button (XB: VIEW / PS:
SHARE).
PRESS the PLUS button (XB: MENU / PS: OPTIONS), and you will feel a HEAVY rumble,
which means all mods have been reset to their default state and button map.
EXIT MENU MODE - TAP the MINUS button (XB: VIEW / PS: SHARE).
MASTER RESET
Reset To Default
From Menu Mode: PRESS PLUS button (XB: MENU / PS:
OPTIONS), and you will feel a HEAVY rumble, which means all
mods have been reset to their default state and button map.
MENU MODE NAVIGATION
NAVIGATION
INFO
Enter MENU MODE
ENTER MENU MODE - HOLD MINUS button (XB: VIEW /
PS: SHARE) until the Mode Select LED turns WHITE.
Settings MENU MODE
L/R bumper swaps Easy Dive bumper. ZL/ZR trigger
swaps Ground Pound + trigger. X (XB: Y / PS: ▲) / Y (XB:
X / PS: ⬛) button swaps Easy Hatty button. (DEFAULT:
LIGHT rumble indicator / SWAPPED: HEAVY rumble
indicator). PLUS button (XB: MENU / PS: OPTIONS)
RESETS everything to DEFAULT.
Exit MENU MODE
EXIT MENU MODE - TAP MINUS button (XB: VIEW / PS:
SHARE).
MARIO MOD INSTRUCTIONS
EASY DIVE
Use the Easy Dive mod to make Mario dive while mid-air at will, without the hassle of
tricky button combinations. The DEFAULT button that activates this mod is the L bumper,
but it can be swapped to the R bumper.
SWAP EASY DIVE BUTTON:
ENTER MENU MODE - HOLD the MINUS button (XB: VIEW / PS: SHARE) until the Mode
Select LED turns WHITE. Proceed to RELEASE the MINUS button (XB: VIEW / PS:
SHARE).
PRESS the R bumper, and you will feel a HEAVY rumble, which means this mod is now
SWAPPED to the R bumper.
PRESS the L bumper, and you will feel a LIGHT rumble, which means this mod is now
DEFAULTED back to the default button, the L bumper.
EXIT MENU MODE - TAP the MINUS button (XB: VIEW / PS: SHARE).
MOD
INFO
Easy Dive
Make Mario dive while mid-air at will, without the hassle of
tricky button combinations. The DEFAULT button that
activates this mod is the L bumper, but it can be swapped to
the R bumper.
Swap Button
ENTER MENU MODE - HOLD MINUS button (XB: VIEW / PS:
SHARE) until the Mode Select LED turns WHITE. RELEASE
MINUS button (XB: VIEW / PS: SHARE). L/R bumper swaps
Easy Dive bumper. (R: HEAVY rumble indicator / L: LIGHT
rumble indicator). EXIT MENU MODE - TAP MINUS button (XB:
VIEW / PS: SHARE).
EASY HATTY
Use the Easy Hatty mod to make Mario cover distances to areas never before thought
reachable with up to 2 throws of Mario’s hat. Mario will automatically jump onto the hat
after throwing it each time. The DEFAULT button that activates this mod is the X button
(XB: Y / PS: ▲), but it can be swapped to the Y button (XB: X / PS: ⬛).
SWAP EASY HATTY BUTTON:
ENTER MENU MODE - HOLD the MINUS button (XB: VIEW / PS: SHARE) until the Mode
Select LED turns WHITE. Proceed to RELEASE the MINUS button (XB: VIEW / PS:
SHARE).
PRESS the Y button (XB: X / PS: ⬛), and you will feel a HEAVY rumble, which means this
mod is now SWAPPED to the Y button (XB: X / PS: ⬛).
PRESS the X button (XB: Y / PS: ▲), and you will feel a LIGHT rumble, which means this
mod is now DEFAULTED back to the default X button (XB: Y / PS: ▲).
EXIT MENU MODE - TAP the MINUS button (XB: VIEW / PS: SHARE).
MOD
INFO
Easy Hatty
Make Mario cover distances to areas never before thought
reachable with up to 2 throws of Mario’s hat. Mario will
automatically jump onto the hat after throwing it each time.
The DEFAULT button that activates this mod is X button (XB: Y
/ PS: ▲), but it can be swapped to Y button (XB: X / PS: ⬛).
Swap Button
ENTER MENU MODE - HOLD MINUS button (XB: VIEW / PS:
SHARE) until the Mode Select LED turns WHITE. RELEASE
MINUS button (XB: VIEW / PS: SHARE). X (XB: Y / PS: ▲) / Y
(XB: X / PS: ⬛) button swaps Easy Hatty button. (SWAPPED:
HEAVY rumble indicator / DEFAULT: LIGHT rumble indicator).
EXIT MENU MODE - TAP MINUS button (XB: VIEW / PS:
SHARE).
EASY SWIM
When the Easy Swim mod is ON, Mario will automatically and endlessly swim at
maximum speed which avoids the headaches of timed button presses.
When Mario enters the water: CLICK in the LEFT STICK button and the RIGHT STICK
button TOGETHER at the same time to toggle ON Easy Swim, and you will feel a HEAVY
rumble.
When Mario leaves the water: CLICK in the LEFT STICK button and the RIGHT STICK
button TOGETHER again at the same time to toggle OFF Easy Swim, and you will feel a
LIGHT rumble.
QUICK MOD
ON/OFF
Easy Swim
Mario will automatically and endlessly swim at maximum speed
which avoids the headaches of timed button presses.
CLICK in the LEFT STICK button & the RIGHT STICK button
TOGETHER at the same time to toggle Easy Swim. (ON:
HEAVY rumble indicator / OFF: LIGHT rumble indicator).
GROUND POUND +
The Ground Pound + mod features a built in bounce for Mario to reach vertical heights
that were previously unreachable. The DEFAULT trigger that activates this mod is the ZL
trigger, but it can be swapped to the ZR trigger.
SWAP GROUND POUND + BUTTON:
ENTER MENU MODE - HOLD the MINUS button (XB: VIEW / PS: SHARE) until the Mode
Select LED turns WHITE. Proceed to RELEASE the MINUS button (XB: VIEW / PS:
SHARE).
PRESS the ZR trigger, and you will feel a HEAVY rumble, which means this mod is now
SWAPPED to the ZR trigger.
PRESS the ZL trigger, and you will feel a LIGHT rumble, which means this mod is now
DEFAULTED back to the default button, the ZL trigger.
EXIT MENU MODE - TAP the MINUS button (XB: VIEW / PS: SHARE).
MOD
INFO
Ground Pound +
Ground Pound with a built in bounce for Mario to reach vertical
heights that were previously unreachable. The DEFAULT
button that activates this mod is ZL trigger, but it can be
swapped to ZR trigger.
Swap Button
ENTER MENU MODE - HOLD MINUS button (XB: VIEW / PS:
SHARE) until the Mode Select LED turns WHITE. RELEASE
MINUS button (XB: VIEW / PS: SHARE). ZL/ZR trigger swaps
Ground Pound + trigger. (ZR: HEAVY rumble indicator / ZL:
LIGHT rumble indicator). EXIT MENU MODE - TAP MINUS
button (XB: VIEW / PS: SHARE).
MARIO GENERATORS
FROG COIN GENERATOR
Frog Coin Generator is available in the first kingdom, “Cap Kingdom”, after the
following requirements are met to remove the rubble from the blocked off door:
Defeat the first boss (Topper). Travel through the “Cascade Kingdom” area. As soon as
you arrive in the “Sand Kingdom”, travel back to the “Cap Kingdom”.
IMPORTANT NOTES: Rumble MUST be set to ON
(you will not actually experience
rumble while the generator is running).
Frog Coin Generator will NOT work if the door that Mario tries to enter is closed, and if
this happens simply PRESS the MINUS button (XB: VIEW / PS: SHARE) to toggle OFF the
generator, manually open the door, and then restart from Step 2 in the table below.
To exit the map screen, ALWAYS exit using the face buttons and NOT the MINUS button
as this will cancel the battle.
Now follow the steps below:
STEPS
INFO
Step 1
Upon fulfilling the requirements described above, travel to the
“Cap Kingdom”.
Step 2
Open the map and warp to the “Central Plaza” checkpoint,
stand still and DO NOT MOVE.
Step 3
ENTER MENU MODE - HOLD MINUS button (XB: VIEW / PS:
SHARE) until the Mode Select LED turns WHITE.
Step 4
PRESS the following D-Pad sequence: ↑ ← ↑ →. From top to
bottom, the Switch UpTM will light up a GREEN Player LED as
you enter the 4 button code. If you have begun entering the
wrong code, wait for the Player LED's to shut off, and try again.
Step 5
Once you have entered the code correctly, all 4 Player LED's
will be flashing GREEN in sync. If you have entered the code
Table of contents
Other Collective Minds Video Gaming Accessories manuals
Collective Minds
Collective Minds STRIKEPACK F.P.S. Dominator User manual
Collective Minds
Collective Minds Cronus Zen User manual
Collective Minds
Collective Minds DriveHub User manual
Collective Minds
Collective Minds STRIKEPACK F.P.S. Dominator User manual
Collective Minds
Collective Minds HORIZON STRIKEPACK User manual
Collective Minds
Collective Minds Cronus Zen User manual
Collective Minds
Collective Minds STRIKE PACK DOMINATOR User manual
Popular Video Gaming Accessories manuals by other brands
Gioteck
Gioteck RC3UNI-11 user guide
Snap-Back Shuffleboard
Snap-Back Shuffleboard TAVERN user manual
Fisher-Price
Fisher-Price J5970 instructions
Christopeit Sport
Christopeit Sport KICKER ROMA Assembly and exercise instructions
Datel
Datel Action Replay PowerBase Product manual and user guide
Harvil
Harvil AH60-3 Assembly instructions
