INTENDED USE:
The Powerful Drum Fan is intended for use in factories, warehouses, car-
shops, café, bar etc.
IMPORTANT INSTRUCTIONS:
1 When using electrical appliances, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury
to persons.
2 Use this fan only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or
injury to persons.
3 Do not place fan on an uneven or surface smaller than the fan which
might allow fan to tip or fall causing damage to people or property.
4 Do not share same power outlet with other electrical appliances to
avoid electricity overload.
5 Always unplug fan when not in use, when moving from place to place,
and when cleaning.
6 Do not operate fan while unattended. Do not sit or stand on fan. Do not
place objects on fan.
7 This fan is not intended for use by young children or infirm persons
without supervision. Young children should be supervised to ensure
that they do not play with the fan.
8 Do not insert or allow foreign objects into the fan or near the fan while
fan is operating.
9 The fan should be used in indoor areas as well as outdoor areas with
roof.
9 When adjusting the direction of fan, turn off fan before doing so.
10 Do not use fan in areas where gasoline, paint or flammable materials
are used or stored.
11 If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or a similarly qualified person in order
to avoid a hazard.
CARE AND CLEANING:
1 This fan should be cleaned at least twice a year.
2 Disconnect the supply cord before cleaning the fan.
3 Use a piece of cloth &/or soft brush to clean away the dirt and dust that have
accumulated. Thereafter, clean the guards & blades with lubricating oil with a
piece of cloth or soft brush. Avoid harsh chemical cleaners.
4 Completely dry the fan and parts before use.
HOW TO USE:
1 Plug this appliance directly into AC 220V power outlet. Be sure plug fits tightly in
outlet. A loose fit will cause overheating and damage to fan and plug.
2 Set speed selector switch to desired position.
3 To disconnect fan, turn switch off, then remove plug from power outlet.
MODEL
DIAMETER
OF THE
BLADE
mm
VOLT/
FREQ.
V/Hz
MOTOR
W
SPEED
R.P.M.
AIR
VOLUME
m³/min
GROSS
WEIGH
T
kg
NOISE
LEVEL
Db(A)
COVER
AREA
m²
CLF-24DM 610 220/50 200 950 150 19 70 30-35
CLF-30DM 760 220/50 280 900 190 22 70 40-45
DIMENSIONS
ΜΟΝΤΕΛΟ Α D Y
CLF-24DM 730mm 290mm 770mm
CLF-30DM 880mm 2900mm 900mm
