3. Cable IN/OUT Direction Indicators:
The green triangle icons on the Intelligence Dashboard (IDS) for your Seal Gen2 9.5rsi will
light sequentially to indicate the rope winding direction。
3.1 Cable IN: The green triangle icons moved from the outside toward the center indicate the
rope winding-in direction.
3.2 Cable OUT: The green triangles icons moved from the center toward the outside indicate
the rope winding-out direction.
3.3 The green triangles icons will turn to red triangles if the motor is over-heating, but the
direction remains unchanged.
4. Thermal Protection
There are three kinds of thermal protection function to protect the motor and control from
damaged or personal injury:
4.1 Temperature warning: The flashing red temperature icon on the intelligence Dashboard
(IDB) of your Seal Gen2 9.5rsi winch indicates the motor is over-heating.
4.2 Handheld Remote Warning: The two green LED indicators on the wired remote control
will change to the red if the motor is over-heating.
4.3 Buzzer warning:, The Seal Gen 2 9.5rs/9.5rsi/12.5rs include an audible buzzer alarm that
alerts if the motor is over-heating.
Temperature Warning Handheld Remote Warning Buzzer warning
5. Wireless Remote Control Icon
5.1 The intelligence Dashboard (IDB) of your Seal Gen2 9.5rsi includes a
blue wireless signal icon that is continuously illuminated to confirm the
wireless remote is paired with thewinch。
5.2 The solid green LED indicators on the wireless transmitter indicates
goodsignal strength,but a flashing red LED indicates a weak signal。
6. Wireless transmitter’s battery life
The solid green LED indicators on the wireless transmitter show a fair internal
battery life, but a flashing green LED indicator indicates a low battery level。The battery should
be replaced immediately if a weak or no signal status found。
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules。
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications。
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to
operate the equipment。