Comfast WR302S User manual

WR302S
USER MANUAL
EN
CZ
SK
HU
DE
2 – 6
7 - 13
14 – 19
20 – 26
27 – 32
The product user guide contains product features, uses and operating procedures. Read
the user manual carefully to get the best experience and avoid unnecessary damage.
Keep this manual for future reference.Strictly comply with applicable laws and
regulations at the place of use.
Importer: Alza.cz a.s., Jankovcova 1522/53, 170 00 Prague 7, www.alza.cz

2
1. Product Description
1.1 This is a supplement for a wireless LAN network, which can expand the scale of your
WiFi signal. It is useful, convenient, and easy to install.
1.2 Structure Description
WPS/Reset
Press the button for 1-2 seconds to repeat automatically. Pressing the button for 10
seconds restores factory settings, the middle so-state lamp will flash for a while when
the restoration to factory settings is successful.
1. Unplug the device during thunderstorms and prevent it from lightning damage.
2. Keep the device away from heat.
3. Make sure the device is in a well ventilated area.
4. Pay attention to waterproofing when storing, transporting and operating the
device.
Power indicator
So state indicator
WiFi indicator
WPS/Reset
WAN/LAN
WARNING

3
2. Product Installation
Note: If the router has a WPS button, you need to choose the WPS “one key to repeater“
option to set up the device (see 2.1.1). If not, please enter the ip address 192.168.10.1 to
set up your device (see 2.2.1).
2.1 Press WPS on the repeater and match automatically.
2.1.1 Plug the WiFi repeater into an outlet near the WiFi router: Press the WPS button
on the main router for 1-2 seconds. Then, press the WPS button on the repeater for 1-2
seconds within 50 seconds. Wait for about 30 seconds, the repeater will repeat the
action automatically. The WiFi indicator will switch itself off for a while and light up again
when a repeat is successful. Finally, a new extended WiFi signal named as “Your original
wifi name – Plus” will show up on your WiFi list. (eg: XXXX-Plus)
Please make sure that the device didn’t repeat your other router net when you pressed
the WPS button to repeat. Otherwise, you will have to press the Reset button to restore
the factory settings of the device.
Note:
Please check whether the button on the router is WPS or QSS.
Please check whether the WPS on the router is open (enter the router interface to
check).
Press the WPS button for only 1.2 seconds.
one key to
repeater

4
2.2 Input IP Setting
2.2.1 Plug the WiFi repeater into an outlet. Conenct the WiFi name of “COMFAST_XXXX”
with your mobile device (cell phone or tablet).
2.2.2 Open your browser and input the 192.168.10.1 IP address. After the site loads,
input the user name and password “admin”.
Change the default language from Chinese to English, enter the default password
“admin” and click the “Log In” button to enter the setting page.

5
Description
More functions (eg: AP mode, router mode), please link up the device with a PC, connect
it to the WAN port of the PC with the included internet cable and enter the IP address
192.168.10.1 to website entry, you can access the PC settings page there.
3. Common Problems
Q: Why can I not surf the internet after setting up the product successfully?
A: Please check whether the password was input correctly. If not, please enter the
correct password.
Q: Why is the network speed is very slow after setting the device up successfully?
A: Please enter the device status page to check whether the “Equipment and the main
AP distance” is fit. If not, you can adjust the position of the repeater.
How to check the status page: after connecting to the extended WiFi successfully, you
can enter the IP address 192.168.10.1 on your mobile’s browser or on PC to check the
status of the repeater.
Note: Please make sure that the IP address from the upper network is not 192.168.10.1.
For more questions, please visit our main page: www.szcomfast.com
1. Please select a WiFi that
you want to extend (if no WiFi
signal is available, please click
the Scan button again).
2. Please enter the WiFi
password from your router
and click connect. (Default
new WiFi name).
3. Extension was successful,
please wait 1 minute to
complete the resetting
process and connect the WiFi
again, you can now browse
the internet.

6
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (eg during transport, cleaning
by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as batteries,
etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
This product has been tested in accordance with the standards used to
demonstrate compliance with the essential requirements set out in the relevant
directives. You can find the declaration of conformity on the alza.cz website.
WEEE
This product must not be disposed of as normal household waste in accordance with the
EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU). Instead
it shall be returned to the place of purchase or handed over to a public collection point
for the recyclable waste. By ensuring this product is disposed of correctly,
you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste
handling of this product. Contact your local authority or the nearest collection
point for further details. Improper disposal of this type of waste may result
in fines in accordance with national regulations.