Comfee CLC27N3AWW User manual

2.7 Cu.Ft. Washer and Dryer
Before using your washing machine,please read this
manual carefully and keep it for future reference.
Inside you will find many helpful hints on how to use
and maintain your washing machine properly. Just
a little preventative care on your part can save you
a great deal of time and money over the life of your
washing machine. You’ll find many answers to
common problems in the chart of troubleshooting
tips. If you review the chart of Troubleshooting Tips
first, you may not need to call for service.
Read This Manual
CLC27N3AWW
Midea America Corp.
300 Kimball Drive,Parsippany,NJ,USA 07054
Customer Service 1-866-646-4332
www.midea.com
OWNER’S MANUAL

P.01 P.02
Contents Safety And Precautions
2
3
6
6
6
6
7
8
8
8
9
9
9
10
10
11
11
11
11
11
12
12
13
13
14
14
18
22
23
24
25
29
30
31
32
Safety And Precautions....................................................................................2
Safety and precautions................................................................................
Important safety instructions........................................................................
Grounding instructions................................................................................
Before operating this machine......................................................................
Attention shall be paid to protecting the machine............................................
Cautions during handling machine................................................................
Cautions when washing clothes....................................................................
Installation Requirements................................................................................
Tools and parts...........................................................................................
Location requirements.................................................................................
Installation clearances.................................................................................
Electrical requirements................................................................................
Washer dimensions....................................................................................
Unpacking the washing machine..................................................................
Installation Instructions..................................................................................
Dispose the packing materials....................................................................
Remove transport bolts and foam................................................................
Select the location.....................................................................................
Install inlet pipe.........................................................................................
Drain system options..................................................................................
Level the washer........................................................................................
Electrical connection..................................................................................
Operating Instructions....................................................................................
Checklist and preparation before washing clothes........................................
View of control panel..................................................................................
Washing clothes at first time.......................................................................
Select the procedure.................................................................................
Table of washing procedures......................................................................
Care And Cleaning ........................................................................................
Troubleshooting Tips.....................................................................................
Remove The Problems...................................................................................
Appendix......................................................................................................
Technical Specifications................................................................................
Installation Requirements............................................................................
Connect inlet pipe......................................................................................
This manual contains important information on the installation, use, and care of your
appliance. Please read this manual carefully before installation and operation of this
machine to prevent injury and property damage.
WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS
Warnings and Important Safety Instructions in this manual DO NOT cover all possible conditions and
situations that may occur. It is your responsibility to use common sense, caution and care when installing,
maintaining and operating your washer.
IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS
WARNING
This indicates that hazards or unsafe practices may cause
serious personal injury or death.
To reduce the risk of fire, explosion, electric shock, or
personal injury when using your washer, these basic safety
precautions SHOULD be followed.
State of California Proposition 65 Warnings
WARNING
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor
of California to publish a list of substances known to the State of California to cause
cancer, birth defects, or other reproductive harm, and requires business to warn of
potential exposure to such substances.
This product contains a chemical known to the State of California to cause cancer,
birth defects, or other reproductive harm. This appliance can cause low-level
exposure to some of the substances listed, including benzene, formaldehyde, and
carbon monoxide.
Contents Safety and precautions

P.03 P.04
Safety And Precautions Safety And Precautions
Important safety instructions SAVE THESE INSTRUCTIONS Important safety instructions SAVE THESE INSTRUCTIONS
WARNING
WARNING - To reduce the risk of fire, electric shock, or injury to persons
when using your appliance, follow basic precautions, including the following:
- Read all instructions before using the appliance.
- Do not wash articles that have been previously cleaned in, washed in, soaked
in,or spotted with gasoline, dry-cleaning solvents, or other flammable or
explosive substances, as they give off vapours that could ignite or explode.
- Do not add gasoline,dry-cleaning solvents, or other flammable or explosive
substances to the wash water. These substances give off vapours that could
ignite or explode.
- Under certain conditions, hydrogen gas may be produced in a hot-water
system that has not been used for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE.If the hot-water system has not been used for such a period,
before using a washing machine, turn on all hot-water faucets and let the
water flow from each for several minutes. This will release any accumulated
hydrogen gas. As the gas is flammable, do not smoke or use an open flame
during this time.
- Always unplug the washing machine from the power supply before attempting
any service. Disconnect the power cord by grasping the plug, not the cord.
- To reduce the risk of fire, clothes, cleaning rags, mop heads and the like which
have traces of any flammable substance, such as vegetable oil, cooking oil,
petroleum based oils or distillates,waxes,fats,ect.,must not be placed in the
washing machine.These items may contain flammable substances which ,
even after washing, may smoke or catch fire.
- Never place items in the washer that have been dampened with gasoline or
any combustible or explosive substance. Do not wash or dry anything that
has been soaked in or spotted with any type of oil (including cooking oils).
Doing so can result in fire, explosion, or death.
- Do not allow children to play on or in the appliance. Close supervision of
children is necessary when the appliance is used near children.
- Pets and kids may climb into the machine. Check the machine before every
operation.
- Glass door or protector may be very hot during the operation. Keep kids and
pets far away from the machine during the operation.
- This machine is not intended for use by persons (including kids) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
machine by a person responsible for their safety.
- Kids should be supervised to ensure that they do not play with the machine.
- When children become old enough to operate the appliance, it is legal
responsibility of the parents or legal guardians to ensure that they are instructed
in safe practices by qualified persons.
WARNING
- Do not machine wash fiberglass materials (such as curtains and window
coverings that use fiberglass materials.) Small particles may remain in the
washing machine and stick to fabrics in subsequent wash loads causing skin
irritation.
- Before the appliance is removed from service or discarded, remove the door
and cut off the power cord.
- Do not reach into the appliance if the tub or agitator is moving.
- Do not install or store this appliance where it will be exposed to the weather.
- Do not tamper with controls.
- Do not repair or replace any part of the appliance or attempt any servicing
unless specifically recommended in the user-maintenance instructions or in
published user-repair instructions that you understand and have the skills to
carry out.
- Never stop a tumble dryer before the end of the program and spread out so that
the heat is dissipated.
- Pull out its plug from the power socket before cleaning or maintenance.
- Make sure that all pockets are emptied.
- Sharp and rigid items such as coin, brooch, nail, screw or stone etc. may
cause serious damages to this machine.
- Pull out its plug and cut off water supply after the operation.
- Please check whether the water inside the drum has been drained before
opening its door. Please do not open the door if there is any water visible.
- Do not try to repair the machine by yourself. The machine may be damaged or
more troublesome repair work may be caused and even dangerous operation
may take place if it is repaired by any inexperienced or unqualified staff.
- If the plug (power cord) is damaged, it shall be replaced by the manufacturer
or a service agent to avoid any danger.
- Take care that power voltage and frequency shall be identical to those of
washing machine.
- Do not use any socket with rated current less than that of washing machine.
Never pull out power plug with wet hand.
- To ensure your safety, power cord plug must be inserted into an earthed three-
pole socket. Check carefully and make sure that your socket is properly and
reliably earthed.
- This machine shall be repaired only by an authorized service center and only
authentic accessories can be used.
- An appliance shall be clearly and permanently marked with a warning that the
appliance is intended for use only with fabrics that have been washed with
water as a cleaning agent.
- To reduce the risk of fire, do not dry articles containing foam rubber or similarly
textured rubber like materials.

Attention shall be paid to protecting the machine
P.05 P.06
Safety And Precautions Safety And Precautions
Important safety instructions SAVE THESE INSTRUCTIONS
- If connected to a circuit protected by fuses, use time-delay fuses with this
appliance.
- Do not dry articles that have been previously cleaned in, washed in, soaked in,
or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive
substances, as they give off vapours that could ignite or explode.
- Do not use fabric softeners or products to eliminate static unless recommended
by the manufacturer of the fabric softener or product.
- Do not use heat to dry articles containing foam rubber or similarly textured
rubber-like materials. The interior of the appliance should be cleaned
periodically by qualified service personnel.
- Do not place items exposed to cooking oils in your dryer. Items contaminated
with cooking oils may contribute to a chemical reaction that could cause a
load to catch fire.
WARNING
Grounding instructions
- This appliance must be grounded . In the event of a malfunction or breakdown,
grounding will reduce the risk of electric shock by providing a path of least
resistance for the electric current. This appliance is equipped with a cord that has
an equipment
- Gurounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all
local codes and ordinances.
WARNING-Improper connection of the equipment grounding conductor can result
in electric shock. Connect to individual branch Circuit. Check with a qualified
electrician or serviceman if you are in doubt as to whether the washer is properly
grounded.
DO NOT modify the plug provided with the appliance if it will not fit the outlet .
Please have a proper outlet installed by a proper outlet installed by a qualified
electrician.
Before operating this machine
- Packing materials may be dangerous to the kids. Please keep all packing
materials (plastic bags, foams etc) far away from the kids.
- Washing machine shall not be installed in bath room or very wet rooms as well
as in the rooms with explosive or caustic gases.
- Make sure that the water and electrical devices must be connected by a qualified
technician in accordance with the manufacturer's instructions and local safety
regulations.
- Before operating this machine, all packages and transport bolts must be removed.
Otherwise, the washing machine may be seriously damaged while washing the
clothes.
- Before washing the clothes at first time, the washing machine shall be operated
in cotton and hot water procedures without the clothes inside .
- This washing machine is for indoor use only.
WARNING
WARNING
WARNING
- Do not climb up and sit on top cover of the machine.
- Do not lean against machine door.
- Please do not close the door with excessive forces. If it is found difficult to close
the door, please check if the excessive clothes are put in or distributed well.
Cautions during Handling Machine
WARNING
- Transport bolts shall be reinstalled to the machine by a specialized person.
- The accumulated water shall be drained out of the machine.
- Handle the machine carefully. Never hold each protruded part on the machine
while lifting.
Machine door can not be used as the handle during the conveyance.

P.07 P.08
Gather the required tools and parts before starting installation. The parts in the right supplied are in
the washer drum.
Installation Requirements
Transport Hole Plug
1/4 nut driver 3/8 socket with ratchet
3/8″ open end wrench
Adjustable wrench or 7/16″ socket with ratchet
Adjustable wrench or 9/16″ open-end wrench
Channel-lock adjustable pliers
Carpenter’s level
″ ″
-
Water Hoses(2)
Failure to comply with these warnings could result in serious
personal injuries. Note: Environmental Protection
- If you plan to dispose this machine, please comply with the local waste disposal
regulations. Cut off the power cord so that it will not be put into reuse.
Remove the door so that kids and animals will not be trapped in the machine.
- Do not use excessive detergents.
- Decontaminant and bleacher can be used to pre-treat the stains on the clothes
only when very necessary.
Safety And Precautions
WARNING – Risk of Fire
Clothes dryer installation must be performed by a qualified installer.
Install the clothes dryer according to the manufacturer’s instructions and local
codes.
Otherwise, it will obstruct clothes dryer airflow and increase the risk of fire.
To reduce the risk of severe injury or death, follow all installation instructions.
Save these instructions.
1.This machine must be earthed properly. If there is any short circuit, earthing can
reduce the danger of electrical shock.
This machine is equipped with power cord, which includes plug, earthing wire at
earthing terminal.
2.Washing machine shall be operated in a circuit separate from other electrical
appliances. Otherwise, power protector may be tripped or fuse may be burned
out.
Installation requirements
WARNING
Tools and parts
Cautions when washing clothes
- Cold city water shall be used and hot water may be also connected according to
the local situations.
- Your washing machine is only for home use and is only designed for the textiles
suitable for machine washing.
- Flammable and explosive or toxic solvents are forbidden. Gasoline and alcohol
etc. shall not be used as detergents. Please only select the detergents suitable
for machine washing, especially for front loading .
- It is forbidden to wash carpets.
- Be careful of burning when washing machine drains hot washing water.
- Never refill the water by hand during washing.
- After the program is completed, please open the door after the bell or
disconnect the power supply to the machine.
- Always follow the fabric care instructions recommended by the clothing
manufacturer.
- Do not use the washing machine if it has a worn power cord or loose plug.
Contact an authorized service agent.
- Do not operate the washing machine if any guards, panels and /or fasteners
except transport fixing bolts have been removed. Check the fill hose
connections on a regular basis to ensure that they are tight and not leaking.
- Do not operate the washing machine if parts are missing or broken.
- Do not touch the door if washing at high temperatures.
Note:
- The Important Safeguards and Warnings indicated in this manual do not cover
all possible conditions which may occur. Common sense, caution and care
must be exercised when installing, maintaining or operating the washing
machine.
- Always contact your dealer, distribute, service agent or the manufacturer
about any problems or conditions that you do not understand.
WARNING

P.09 P.10
Installation Requirements Installation Requirements
1.A 120V~.60Hz, AC only,15-or 20amp,fused electrical supply is required. A time-delay fuse or
circuit serving only this appliance be provided .
2.This washer is equipped with a power supply cord having a 3 prong grounding plug.
3.To minimize possible shock hazard ,the cord must be plugged into a mating, 3 prong,
grounding type outlet, grounded in accordance with local codes and ordinances. If a mating
outlet is not available ,it is the personal responsibility and obligation of the customer to have
the properly grounded outlet installed by a qualified electrician.
4.If codes permit and a separate ground wire is used, it is recommended that a qualified
electrician determine that the ground path is adequate.
5.Do not ground to a gas pipe .
6.Check with a qualified electrician if you are not sure the washer is properly grounded.
7.Do not have a fuse in the neutral or ground circuit.
Location requirements
Selecting the proper location for your washer improves performance and minimizes noise
and possible washer “walk.”Your washer can be installed under a custom counter, or in a
basement, laundry room, closet, or recessed area. See “Drain System.”Companion
appliance location requirements should also be considered. Proper installation is your
responsibility.
You will need
1. A water heater set to deliver 111°F (44°C)-129°F(54°C) water to the washer.
2. A grounded electrical outlet located within 6 ft.(1.8 m) of where the power cord is
attached to the back of the washer. See“Electrical Requirements.”
3. Hot and cold water faucets located within 4 ft.(1.2 m) of the hot and cold water fill
valves, and water pressure of 20-100 psi (137.9-689.6 kPa).
4. A level floor with a maximum slope of 1" (25 mm)under entire washer. Installing the washer
on soft floor surfaces, such as carpets or surfaces with foam backing is not recommended.
5. A sturdy and solid floor to support the washer with a total weight (water and load) of 200lbs.
6. Do not operate your washer in temperatures below 32°F (0°C). Some water can
remain in the washer and can cause damage in low temperatures.
Installation clearances
1.The location must be large enough to allow the washer door to be fully opened.
°
2. Additional spacing should be considered for ease of installation and servicing. The door
opens more than 90 and it is nor reversible.
3. Additional clearances might be required for wall, door, and floor moldings.
4. Additional spacing of 25mm (0.98") on all sides of the washer is recommended to reduce noise
transfer.
5. Companion appliance spacing should also be considered.
Electrical requirements
WARNING
Electrical Shock Harzard
Connect to grounded 3 prong outlet with an individual 15 or 20
amp branch circuit protected by a 15 or 20 amp circuit breaker.
Connect to individual branch circuit.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in electrical
shock, fire, or death.
Electrical requirements
Washer dimensions
The dimensions shown are for the recommended spacing.
23
"
( 595 mm)
1 "
(25 mm)
1 "
(25 mm)
2 " (50 mm)
" min.
(850 mm)
1/2
1/2
1/2
4
2"
(1080 mm)
1/2
23
"
(595 mm)
33
33
"
(850mm)
Unpacking the washing machine
Unpack your washing machine and check if there is any damage during the transportation.
Also make sure that all the items (water hoses and transport hole plug) in the attached bag are received.
If there is any damage to the washing machine during the transportation, or any item is
missing, please contact the local dealer immediately.
1/2
1/2
23
"
(595 mm)

P.11 P.12
Installation Instructions
Install inlet pipe
Dispose the packing materials
The packing materials of this machine may be dangerous to kids. Please dispose them
properly and avoid easy access by kids or pets. Please dispose the related packing materials
according to the relevant local regulations.
Remove transport bolts and foam
Before using this washing machine, transport bolts
must be removed from the backside of
this machine. Please take the following steps to
remove the bolts:
1.Loosen all bolts with 7/16″ socket to remove bolt 13mm.
2.Cover the holes with transport hole plugs.
3.Keep the transport bolts properly for future use.
Make sure the small triangle foam is removed with the
bottom one together. If not, lay the unit down with side
surface, then remove the small foam from the bottom of
the unit manually.
Select the location
Before installing the washing machine, the location characterized as follows shall be
selected:
- Rigid, dry, and level surface (if not level, please make it level with reference to the
following figure “Adjust Leg”)
- Sufficient ventilation
- Room temperature is above 0℃
- Keep far away from the heat sources such as coal or gas.
Make sure that the washing machine is not on the power cord.
Do not install the washing machine on the carpet floor.
-
-
Connect inlet pipe
Connect the inlet pipe as indicated in the figure.
For the model which has hot valve, please connect
the hot vale to hot water tap.
HC
1.Connect the elbow to tap and fasten it
clockwise.
2.Connect the other end of inlet pipe to the inlet
valve at the backside of washing machine and
fasten the pipe tightly clockwise.
Note: Please use a standard tap. If there is any leakage after connection, repeat the steps
to connect the inlet pipe.
Drain system options
A
Capacity can be no less than 17 gal.(64 L)per minute.
The top of the standpipe must be at least 60cm(23.6") high and
no higher than 100cm (39.4") from the bottom of the washer.
Floor drain system(view D).The floor drain system requires
a siphon break that may be purchased separately.
The siphon break must be a minimum of 28"(710 mm) from the
bottom of the washer.Additional hoses might be needed.
Min 60(23.6")
Max 100(39.4")
B
Laundry tub drain system (view C)
The laundry tub needs a minimum 20 gal.(76 L)
capacity.The top of the laundry tub must be
at least 60cm(23.6") above the foor.
Min.60cm
Max.100cm
C
28 " min.
(710 mm)
D
Standpipe drain system -wall or floor (views A &B)
The standpipe drain requires a minimum diameter
standpipe of 2"(50 mm).
Installation Instructions

P.13 P.14
Operating Instructions
Installation Instructions
Level the washer
5.Put a solid cylinder (e.g. pop cans) oppositely on the
top cover of the washing machine from in the left, right,
front and back directions. If the cylinder keeps stable, the washing machine is
positioned level. If it rolls, the washing machine is not leveled.The rolling direction is
the direction of lower ground surface.Then the two legs in this direction shall be raised at the
same time until the washing machine is level.Steps 1~3 are repeated to make the bottom legs
closely against the ground and the nuts shall be locked tightly. .
3.Ensure the positioning status of washing machine.
Loosen the lock nut with spanner and turn the leg
with hand until it closely contacts with the floor. Press
the leg with one hand and fasten the nut closely to the
cabinet with the other hand.
4.After being locked properly, press four corners again to
make sure that they has been adjusted properly. If it is
still unstable, repeat Steps 2 and 3
1.When positioning the washing machine, please
first check if the legs are closely attached to the
cabinet. If not, please turn them to their original
positions with hand or spanner and tighten the
nuts with spanner.
2.After positioning the washing machine, press
four corners on top cover of washing machine
in sequence. If the washing machine is not
stable when being pressed, this leg shall be adjusted.
Electrical connection
- As the maximum current through the unit is 12A when you are using its heating function,
please make sure the power supply system (current, power voltage and wire) at your
home can meet the normal loading requirements of the electrical appliances.
- Please connect the power to a socket which is correctly installed and properly grounded.
- Make sure power and voltage at install location is same to that in the machine's rating label.
- Power plug must match the socket and chassis must be properly and effectively grounded.
- Do not use multi-purpose plug or socket as extension cord.
- Do not connect and pull out plug with wet hand.
- When connecting and pulling out the plug, hold the plug tightly and then pull it out. Do
not pull power cord forcibly.
- If power cord is damaged or has any sign of being broken, a new power cord must be
selected or purchased from its manufacturer or service center for replacement.
WARNING
WARNING – To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
Operating instructions
Checklist and preparation before washing clothes
Please read Operating Instructions carefully to avoid the troubles of washing machine and
garment damages .
Check if the first-washed clothes will bed discolored.
After a white towel touched with liquid detergent is used to wash the invisible corners of the
clothes, check if the white towel is stained with
clothes' original color.
As for the scarves and those clothes that easily
get discolored among imported clothes, please
wash them separately before washing.
As for the stains on sleeves, collars and pockets,
use the liquid detergent and wash it with brush
gently. Finally put them into the washing machine
to achieve ideal washing effects.
As for temperature-sensitive clothes, they shall
be washed as required in the labels. Otherwise,
it may cause color change or distortion.
Keep in Mind:
Never leave clothes to be washed in washing machine for a long period of time.
Otherwise it may get moldy and cause spots. Therefore, please wash the clothes in time.
The clothes also may get color changed or distorted if they are not washed according to
the stated washing temperature.
Clothes that can not be washed by washing machine
The clothes that may get distorted if being immersed in water:
Ties, waistcoats, western-style clothes, outer garments etc. may have obvious shrinkage
if being immersed in water; the discolored clothes such as blended spinning clothes of
artificial fiber etc.

P.15 P.16
Embossed clothes, resin clothes etc. may get distorted when being
immersed in water. Among cotton and wool materials, the clothes that get easily distorted
are wrinkle-style silk, fur products and fur decorations;
Clothes with decoration, long dress and traditional clothes etc are the products to get
decolorized easily.
Please do not wash the clothes without material labels and washing requirements.
Never wash the clothes stained with the chemicals such as gasoline, petroleum, benzene,
paint thinner or alcohol.
Please pay attention with regard to detergents
“Low bubble” detergent or washing powder or washing powder special for drum washing
machine shall be selected according to fiber types (cotton, synthetic fiber, soft products and
wool products), colors, washing temperatures, soil level and types. Otherwise,
excessive bubbles may be generated and overflowed out of the drawer so that accidents
may take place.
Bleach belongs to alkali type and can damage clothes, so it is suggested to use follow
manufacturer's recommendations.
Powder detergents can easily leave the residues in the clothes that can generate a bad smell,
and needs to be sufficiently rinsed.
Detergent can not easily get dissolved completely if there is too much detergent or water
temperature is rather low. It can remain in clothes, pipes and washing machines to
pollute the clothes.
Washing shall follow the weight of clothes, soil level, local water hardness as well as
the recommendations from the detergent's manufacturer. Please consult the water
company if you are not clear of water hardness.
Note:
Keep detergents and additives in safe and dry places out of reach to kids.
Please take out contents of the pockets.
Please check the pockets of the clothes to be washed, empty the rigid items such as
decorations and coins, otherwise washing machine may be damaged or have abnormal
troubles that may cause damages to the machine.
For the clothes to be washed, they are classified according to the following
characteristics:
The symbol types of care labels: the clothes to be washed are classified into cotton, blended
fiber, synthetic fiber, silk, wool and artificial fiber.
Color: white and other colors shall be identified. All new colorful articles shall be washed
in a separate load.
Checklist and preparation before washing clothes
Operating Instructions Operating Instructions
Checklist and preparation before washing clothes
Size: the articles of different sizes are washed together to increase the washing effects.
Sensitivity: soft articles shall be washed separately. As for new pure wool textiles, curtains
and silks, delicate cycle shall be selected. Check the labels in all washing articles.
The clothes shall be sorted before being put into washing machine. As for the curtains with
hooks, the hooks shall be removed before being washed.
The decorations on the clothes may damage the washing machine. As for the clothes with
buttons or embroideries, they shall be turned over before being washed.
Clean up fasteners:
Zips shall be zipped close and buttons or hooks shall be fixed. The loose band or ribbon shall
be bound together.
It is suggested to put bras into the pillow slip
with zip or buttons sealed to prevent the steel
wire from popping out of bras into the drum and
damaging the machine.
Delicate textiles such as laced curtains,
straightjackets, small articles (tight socks,
handkerchiefs, ties etc.) shall be put into string
bag for washing.
When washing a single big and heavy dress such
as jeans, wadded jackets, weight jackets etc.,
it may easily cause out of balance and give
alarm . Therefore it is suggested to add one or
washed together so that draining can be done
smoothly.
Clean away dusts, stains and pet hairs from the clothes.
The clothes may be damaged and disturb washing effects during the friction between dusts,
stains and clothes.
To protect baby skin
Baby articles (baby clothes and towels) including napkins shall be washed separately.
Rinsing times shall be increased to ensure the thorough rinsing and cleaning without the
detergent residues.
It is suggested that the parts that are easily stained such as white socks, collars and
sleeves etc. shall be hand washed before being put into washing machine to achieve
ideal washing effects.
Please use powder or liquid detergents. The residues of the soap could remain in the gaps of
the clothes if soap is used.
WARNING

P.17 P.18
View of control panel
Operating Instructions Operating Instructions
Checklist and preparation before washing clothes
The clothes which easily get pill shall be turned over for washing
The clothes which easily get pill shall be washed separately; otherwise the other
articles can be stained with dust and thread residue etc. Preferably, black clothes and cotton
clothes shall be washed separately because they can easily get stained with the
of other colors when being washed together.
Please check before washing.
Washing machine shall not wash water-proof materials (ski suits, outside napkin
pads, curtains).
As for the fiber products that water can not get soaked easily into such as water-proof
cushions, and clothes, it is better not to wash. Otherwise there will be water bursting out
or abnormal vibration to cause danger while rinsing and draining so that the clothes also
may be damaged. (Such as outside napkin pads, raincoats, umbrella, ski suits, car covers,
sleeping sacks etc.)
Cautions during Draining
Draining of water-proof clothes and fiber products:
In the normal washing and draining status, moistures of water-proof clothes and fiber products
may not be drained while water is gathered in one direction so that the eccentricity of washing
machine is too great and vibration or moving is caused.
thread residue
Notes: 1.The Control panel line chart is for reference only,Please refer to real product as standard.
2.The Control panel could be changed without written notice. Please visit the website of Washing Machine or call up the service line for
consultation.
Programme
For the convenience of users to washing clothes with the different programme.
Start/Pause
Press the button to start or pause the wash cycle
On/Off
Press once to turn the washing machine on, press again to turn the washing machine off.
Function setting
Press the button repeatedly to set the water temp.
washing time,rinse number,spin speed and so on.
Display
Rinse
Wash
Child Lock
Express
Spin
Steam
More Dry Normal Dry
Less Dry
Air Fluff
Time Dry

P.19
Operating Instructions
P.20
Operating Instructions
View of control panel
-
- Heavy Duty
This program is intended for washing heavy clothing like towels.
- Bulky
This program is intended for washing large clothing .
- Sports Wear
Washing the activewear.
- Spin Only
Extra spin with adjustable spin speed.
- Rinse & Spin
Extra rinse with spin.
- Washer Clean
This program is specially set in this machine to clean the drum and tube. It applies high
temperature sterilization to make the clothes washing more green. When this procedure is
performed, the clothes or other washing cannot be added. When proper amount of
chlorine bleaching agent is put in, the cleaning effect will be improved. The customer can use
this procedure regularly to clean as needed.
- Quick Wash
Extra short program approx, suitable for lightly soiled washing as
a small amounts of laundry.
- Delicates
For delicate, washable textiles, e.g. made of silk, satin, synthetic
fibres or blended fabrics.
- Sanitary
Give full play to its active enzyme washing powder, with Ex. hot wash and Ex. heavy soil level,
suitable for difficult to wash the clothes.
- Wool
You can select this procedure to wash wool textiles labeled with “Machine Wash”.
Please select the proper washing temperature according to the label on the articles to be
washed. Furthermore, the proper detergent shall be selected for wool textiles.
- Perm Press
Moderate strength of washing. This function can be used to reduce the wrinkles of clothes.
- Baby Wear
Washing the baby’s clothes, it can make the baby's wear cleaner and make the rinse performance better
to protect the baby skin.
- Dry Only
Select it to dry clothes, the temperature is different .The drying time according to the load.
- My Cycle
Press Temp. 3sec. to set My Cycle to memory the program.
- Wash&Dry
Select it to wash and dry clothes. For hard-wearing textiles, heat-resistant textiles made of cotton or linen.
Normal
Hard-wearing textiles, heat-resistant textiles made of cotton or linen.
List of programs / wash cycles
The Special function
- Child Lock
To avoid children operating the unit, the child lock feature can be turned on. To turn on the child
lock feature: press the soil level and dry buttons together for three seconds. The
econds during the running procedure, the buzzer
will beep, Start/Pause button as well as the rotary switch are locked. Press the two buttons
for 3 seconds together and buzzer will beep to release to locking. But cut off the power
supply, the kid’s protection is also release to locking. The kid’s protection will not be
cancelled after all procedures are completed.
- Delay
Delay function can be set with this button, the delaying time is 0-24H.
Set the delay function:
1.Select a program;
2.Press the Delay button to choose the time;
3.Press Start/Pause to commence the Delay operation.
Cancel the Delay function :
Press the Delay button until the display will be 0H . It should be pressed before starting the
program. If the program already started, should press the On/Off button.
Notes: If there is any break in the power supply while the machine is operating, a special
memory stores the selected program and when the power is restarted, press the
Start/Pause button the left time is continues.
- Reload
This operation can be executed during the washing procedure. When the drum of the
washer (dryer) machine is still rolling and there is large amount of water with high temperature
in the drum. The state is unsafe and the door cannot be opened forcefully. To press
"Start/Pause"for 3 sec. to reload, and start the clothes adding in the midway function .
Please follow the steps as bellow:
1.Wait until the drum stops rotation.
2.The door lock is unlocked.
3.Close the door when the clothes needs are loaded and repress the"Start/Pause"button.
Notes: Don't use the Reload function when the water surface over the edge of the inner tub
and the temperature is higher.
other buttons
except On/Off button can not work, at this state, the machine power off when press the key on/off.
Press Function and Select together 3 s

P.21
Operating Instructions
P.22
Operating Instructions
View of control panel
- Express
- Dry
Press Steam 3 seconds to select Express function.
This option reduces the overall washer cycle time by optimizing the wash, rinse and spin actions
and/or gently raising the wash temperature to get clothes cleaned faster. Option is available on
Normal, Perm press, Heavy Duty, Bulky, Sports wear cycles. Total wash time will vary based on cycle
chosen and options selected.
Press the Dry button continuously to choose the dry level: Time Dry 30,60,90min /More Dry /
Normal Dry/ Less Dry/ Air Fluff.
Time Dry 30,60,90min : Drying your laundry and finish within given time. (30/60/90 minutes)
More Dry : This level leaves the cloths completely dry and ready to use.
Normal Dry :This level leaves the cloths ready to fold and store in the wardrobe.
Less Dry : This level leaves the cloths with some humidity. Perfect for ironing.
Air Fluff : To prevent wrinkles. Drum will rotate every half hour and stop half hour, shaking up
the clothes to avoid laundry left in washing machine. The fan will also circulate air
through the washer to prevent odors and keep clothes scent fresh. This function lasts
for up to 8 hours.
Note!
Drying hints
- Thoroughly spin you laundry before drying.
- To ensure proper drying, please sort your laundry according to the fabric
type and drying temperature.
• Clothes not suitable for drying
- Particularly delicate items such as synthetic curtains, woolen and silk,
clothes with metal inserts, nylon stockings, bulky clothes, such as
jackets, bedcovers, quilts, sleeping bags and duvets must not be dried.
- Clothes padded with foam-rubber or materials similar to foam-rubber
must not be machine dried.
- Fabrics containing residues of setting lotions or hair sprays, nail
solvents or similar solutions must not be machine dried in order to avoid
the formation of harmful vapours.
•
- Synthstic should be set the proper drying time.
- My Cycle
To save a favorite cycle, set the desired setting for wash cycle, soil level, spin speed and
wash temp settings and hold down the My Cycle button for 3 seconds, A beep will sound to
indicate the cycle has been saved.
To use your custom cycle, press the My Cycle button before washing a load.
To change the saved cycle, set the desired setting and hold down the My cycle button for 3
seconds.
View of control panel
-Soil level
It is suitable for different level of soil (from light to heavy).
The default level is , choose the soil level according to needs.
-Temp.
When needed, the washing temperature can be adjusted by pressing the temperature
button in the following steps: Tap Cold - Cold - Warm - Hot - Ex. hot.
-Spin
Press the button to change the spinspeed.
Ex. Ex.
different for the program
-Steam
SteamCare is the function added before main wash, which will generate warm
steam to to sterilize and give performance especially for cold wash.
NOTE:
When using My cycle, wash options cannot be modified after the cycle has been started.
NOTE:
If you change wash options with My Cycle before starting the cycle, the My Cycle light will
turn off and you will be returned to the base cycle.
Washing clothes at first time
Before washing clothes at first time, the washing machine shall be operated in
one round of the whole procedures without clothes in as follows:
1.Connect power source and water.
2.Put a little detergent into the box and close it.
3.Press the button “On/off”.
4.Press the button “Start/Pause”.

Washing clothes at first time
The drawer is separated as follows:
I/ : or washing powder,
bleaching or decontaminating products.
: washing additive, such as fabric softener .
Put detergent into washing machine.
1.Pull out the drawer.
2.Fill detergent into Case II.
3.Fill softener into Case (when necessary).
II Detergent softener
I/
Ⅰ
Ⅱ
Notes:
- As for the powder detergent or ropy detergent or additive, before they are poured into the detergent box,
it is suggested to use some water for dilution to prevent the inlet of detergent box from being blocked
and overflowing while filling water.
- Please choose suitable type of detergent for the various washing temperature to get the best washing
effect with less water and energy consumption.
P.24
Operating Instructions
•
•
The parameters in this table are only for user's reference. The actual parameters
maybe different with the parameters in above mentioned table.
Note!
The program with can be choose dry function.
P.23
Operating Instructions
Energy test program: Normal.
“Normal ” is the standard washing programs to which the information in the label and the fiche relates, and they
are suitable to clean normally soiled cotton laundry and that they are the most efficient program in terms of
combined energy and water consumptions for washing that type of cotton laundry, that the actual water temperature
may differ from the declared cycle temperature.
Table of washing procedures
Programme
Washing/
Drying (kg)Load Default
Time(H)
12.0
Default
Temp.(°C)
12.0
1400RPM
Means must ○ Means optional
Steam Express Delay Soil
Level
Spin
Speed
Perm Press
Heavy Duty
Bulky
Sports Wear
Spin Only
Rinse & Spin
Washer Clean
Wash&Dry
Dry Only
Sanitary
Baby Wear
Wool
Delicates
Quick Wash
Normal
2.0
2.0
6.0
12.0
12.0
6.0
6.0
12.0
12.0
6.0
12.0
2.5
Warm 1:04
0:57
1:40
1:23
0:57
0:13
0:23
1:28
5:43
4:19
2:18
1:37
1:01
0:58
0:36
6.0
Warm
Hot
Cold
Warm
Ex. hot
Ex. hot
Hot
Cold
Cold
Tap cold
○○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
_
6.0
Normal
○
○
○
○
○
--
--
--
--
--
--
○
○
○
○
○
○
○
○
--
--
--
--
--
--
--
--
--
--
Med
High
High
High
Ex.light
Ex.light
High
Normal
Normal
Ex.heavy
Ex.heavy
Ex.heavy
Normal
Normal
Normal
Ex.light
Med
Med
High
High
Ex.light
High
High
○○
My Cycle
Normal
Warm
○
___
-- - -
Tap Cold
Cold water with no warm water added.
Cold
Brightly colored, very lightly soiled items.
Warm
Normal soil level articles (including synthetic and wool)
Hot
Moderate soil level, colorful flax, cotton and synthetic articles with certain
discolored degree (for example: shirts, night pajamas; slight soil level, pure
white flax (for example: underwear)
Ex.hot
High soil level, pure white cotton or flax (for example: coffee table cloths,
canteen table cloths, towels, bed sheets)
Select the procedure
The proper washing procedures shall be selected according to the types, quantities, and
soil level of the clothes to be washed in combination with the following washing
temperature table.
Start up washing machine
Connect the power. Check if water pipes are connected properly. Open the tap completely.
Put in the clothes to be washed and fill in the detergent and tackifier. Then press the button
“Power”, Select the proper procedures and functions and press the button “Start/Pause”.

P.25 P.26
Care And Cleaning Care And Cleaning
Care and cleaning Care and cleaning
Before performing maintenance on the unit, disconnect power and turn off the water.
WARNING
- Solvents are forbidden to avoid that the washing machine is damaged, and
toxic gases are generated or exploded.
- Do not spray the machine with water.
- It is forbidden that the detergents containing PCMX are used to clean the
washing machine.
- Service Personnel- Do not contact the following parts while the appliance is
energized incase of electric shock: Electrical value, Drain Pump, Door Lock,
Dry Heater (Combo), Fan Motor (Combo).
Cleaning and Maintenance of Washing Machine Cabinet
Proper maintenance on the washing machine can extend the life of the unit. The surface can
be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any
water overflow, use the wet cloth to wipe it off immediately.
Notes: formic acid and its diluted solvents or equivalent are forbidden.
Clean Internal Drum
The rusts left inside the drum by the metal articles shall be removed immediately with
chlorine-free detergents.
Never use steel wool.
Dispose a Frozen Washing Machine
When the temperature drops below zero and your washing machine gets frozen, you may:
1.Disconnect the power supply for the washing machine.
2.Wash the tap with warm water to loosen inlet pipe.
3.Take down inlet pipe and immerse it in warm water.
4.Pour warm water into washing drum and wait for 10 minutes.
5.Reconnect inlet pipe to the tap and check whether inlet and outlet are working normally.
Notes: when the washing machine is reused, make sure the ambient temperature is above 0 ℃
Winterizing the unit
If your washing machine is located in the room where it can get frozen easily, please drain
the remaining water inside drain pipe and inlet pipe thoroughly.
Remove the remaining water in inlet pipe:
1.Close the tap.
2.Screw off the inlet pipe from tap and put its end into the container.
3.Start up any procedure except single Wash or Drain
procedure. Water will be drained out of inlet pipe if any
for about 40 seconds.
4.Reconnect the inlet pipe to tap.
Remove the remaining water in drain pump
To avoid burning, it shall be done after the hot water
inside the machine cools down.
WARNING
Clean detergent box and grooves
Clean detergent drawer and grooves
1.Press down the arrow location on softener cover
inside the drawer.
2.Lift the clip up and take out softener cover and wash
all grooves with water.
3.Restore the softener cover and push the drawer into
position.
Clean inlet filter
Inlet filter shall must be cleaned if there is not any or
insufficient water in when the tap is opened.
Clean the tap filter:
1.Close the tap.
2.Select any procedure except “Wash” or “Drain”
procedure.
3.Press the button “Start/Pause” and keep the
procedure running for about 40 seconds.
4.Remove the inlet pipe from the tap.
5.Use water to wash the filter.
6.Reconnect the inlet pipe.
Washing the filter in washing machine:
1.Screw off the inlet pipe from the backside of the
machine.
2.Pull out the filter with long nose pliers and reinstall
it back after being washed.
3.Reconnect the inlet pipe.
4.Open the tap and make sure there is no water leakage.
5.Close the tap.

P.27 P.28
Care And Cleaning
Care and cleaning
WARNING
Pull out the power plug to avoid electrical shock before washing.
After using the washing machine, pull out the power cord and close the door
tightly to avoid pinching the kids.
Remove foreign matters
Drain Pump Filter:
Drain pump filter can filter the yarns and small foreign matters from the washings.
Clean the filter periodically to ensure the normal operation of washing machine.
According to the soil level within the cycles and the frequency of the cycles, you have
to inspect and clean the filter regularly.
The pump should be inspected if the machine does not empty and/or spin;
The machine makes an unusual noise during draining due to objects such as safety
pins, coins etc. blocking the pump.
WARNING
The Service_panel proceed as follows:
When the appliance is in use and depending on the programme selected there can be hot water
in the
pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished
the cycle, and is empty. When replacing the cover, ensure it is securely retight end so.
Warning!
Open the cover filter use a flat
blade screwdrive
Rotate 90° and pull out
the emergency drain hose,
and take off the hose cap
Open the filter by turning
to the counter clockwise
Remove extraneous matter
123
Close the lower cover cap
6
5
4
Emergency
drain hose
After water runs out,reset
the drain hose
Care And Cleaning
1.Open filter door
Emergency door pull cord
2.Emergency pull cord
Emergency Door Release
Care and cleaning
In case of power failure or other circumstances and door cannot be opened. If it is
necessary to open the door under this circumstances, please pull down the pull cord
inside emergency door and restore the pull cord after opening the door.
The machine is not allowed to use the emergency switch pull cord during washing. If need to run machine
urgently, it is recommended to open door after water is cooled, to avoid getting burn caused by high
temperature residual water outflow from the machine tub.
Warning!

P.29 P.30
Remove The Problems
Remove the problems
• or the display
shows other alarm codes
After the check, activate the appliance. If the problem occurs
again, contact the service.
The start of the appliance does not work or it stops during operation.
First try to find a solution to the problem, If not, contact the service centre.
Note!
Description Reason Solution
Restart after the door is closed
Check if the clothes is stuck
Door is not closed properly
Door can’t be
opened
Washer's safety
protection design is working
Disconnect the power, restart
the product
Water leakage The connection between inlet
pipe or outlet hose is not tight
Check and fasten water pipes
Clean up outlet hose
Clean and wipe the detergent
box
Abnormal noise
Check if the fixing (bolts) have
been removed
it’s installed on a solid
and level floor
Check
Indicator or display
does not light
Disconnect the power
PC board or harness has
connection problem
Check if the power is shut
down and the power plug is
connected correctly
Washing machine
cannot start up
Detergent residues
in the box
Detergent is dampened
or agglomerated
Description Reason Solution
Check if the water pressure is
too low
Straighten the water pipe
Check if the inlet valve filter is blocked
Check if the drain hose is blocked
Water injecting
problem while
washing
Overtime water draining
Please try again first, call up
service line if there are still
troubles
Others
Water overflow Restart the washer
Restart after the door is closed
Check if the clothes is stuck
Door is not closed properly
Check if the door is closed tightly.
Check if power plug is inserted well.
Check if water supply tap is opened.
Check if button “On/Off” is pressed.
Check if button “Start/Pause” is pressed.
Check if the transportation bolts has been
removed.If cabinet is installed on the solid
and level floor.
Check if there are any barrettes or metal
articles inside.
Check if the legs in the washing machine
are adjusted level.
Can normally wash the clothes.
Only cannot wash with heating.
Shall contact the service center promptly.
Clean and wipe the box.
Use liquid detergents or the detergents
special for drum.
Check and fasten water pipes.
Clean up outlet hose and ask a
specialized person to repair it when
necessary.
Check if the power is shut down and
power plug is connected correctly.
If not, please call up service line.
Select a proper procedure.
Add the proper detergent quantity
according to the instructions in
detergent package.
Disconnect the power.
Fix the inlet pipe.
Replace the drain hose.
Solution
The connection between inlet
pipe or outlet hose and tap or
washing machine is not tight.
Drain pipe in the room is blocked.
The clothes are too dirty.
Insufficient detergent quantity.
The inlet pipe is not connected
firmly.
Outlet hose has water leakage.
Washing powder is dampened
and agglomerated.
Heating element defective.
Machine's safety protection
design is working.
Power is disconnected.
PC board has problems.
Harness has connection
problem.
Reason
Washing machine
cannot start up
Water is
overflowed from
the bottom of the
machine
Door cannot be
opened
Detergent
residues in the
box
Washing effects
are not good
Abnormal noise
Great vibration
Heating fault
Water leakage
Indicator or
display does
not light.
Troubles
Troubleshooting Tips
Troubleshooting tips

P.32
Power Supply
Dimension(W*D*H)
Net Weight
Washing Capacity
Rated Current
Standard Water Pressure
120V~ , 60Hz
595*640*850(23.4*25.2*33.5")
73kg (161Ib)
12.0kg (26Ib)
9.5A
0.05MPa~1MPa(7.25psi~145psi)
Technical Specifications
Technical specifications
Appendix
Appendix
To avoid fire, electrical shock and other accidents, please remember the following
reminding:
- Only the voltage indicated in power label can be used. If you are not clear of
the voltage at home, please contact the local power bureau.
- When you are using the heating function, the maximum current through the
washin machine will reach 12A. Therefore, please make sure the power
supply units (current, voltage and cable) can meet the normal load
requirements for the machine.
- Protect the power cord properly. Power cord shall be fixed well so that it will
not trip the people or other things and be damaged. Special attention shall be
paid to the socket. It shall be plugged into the sockets easily and attention
shall be paid to the plug location.
- Do not make the wall-mounted socket overloaded or cable extended.
Overloading of the wiring may cause fire or electrical shock. Do not pull out
power plug with wet hand.
- To ensure your safety, power plug shall be inserted into an earthed three-pole
socket. Carefully check and ensure that your socket is properly and reliably
earthed.
No Machine Wash
Do not Tumble Dry
Line Dry in Shade
No Dry Clean
Iron with Cloth
Dry after Wash
Illustration
Do not Wash
Do not Iron
No Wring
No Bleach
Graphic Symbol
CI
Washing (including Machine
Wash and Hand Wash)
Medium Temperature and
Max. Temperature 150 C
Warmly Dry Clean
Illustration
Hand Wash
Tumble dry
Dry Clean
Steam Iron
Bleach
Line Dry
Care Lable
Iron
Graphic Symbol
CI
WARNING
P.31
Model:CLC27N3AWW

P.34P.33

P.35