comfortel butterfly accelerator User manual

#1580 BUTTERFLY ACCELERATOR PEDESTAL
butterfly
accelerator
comfortel.com.au
owners manual
GET STARTED
SPECIFICATIONS
Width: 635mm
Depth: 783mm
Height: 1680mm
Power: 700-830W
Voltage: 220-240V
NET Weight: 12kg

ASSEMBLY
ASSEMBLY
1. Fix the wheels in the tripod, screw it with wrench (K).
2.Fix the support column in the tripod (pay attention to the
direction!), tighten the screws.
3.Fix the movable support column into the support column
(pay attention to the direction! Aim the slot toward the
srew, tighten the screw to fix it).
Pay Cautious Attention: For sake of safety, before
completing assembling it, do not unscrew the screws
for adjustment.
4.Put the main part in the hole sites of the support column,
fixing with screws.
For fear of the activity tube bouncing out
to cause injury, please do not loosen the
screw before finishing assembling.

OPERATION: HOW TO USE
OPERATION
1.Move the machine to the middle of the head, adjust the height.
Attention: The distance between the heating part and the head
should be 17cm.
2. Plug in the power line, turn the machine on, then the display
screen becomes the default state, as the left-down picture shows.
3. Set the working time and temperature.
4. Work finishing, after 3 times of alarming sound, the machine
comes back to the default state.
OPERATION: FUNCTIONS
TEMPERATURE DISPLAY: Each press adds or subtracts 5oC,
holding down the “+” button meas you get the 70oC maximum
temperature and by holding down the “-” you get the minimum
temperature of 40oC. The default temperature is 55oC.
TIME DISPLAY: Each press adds or subtracts a minute, by holding
down the “+” buttom you get the maximum time of 60 minutes
and if you hold down the “-” buttom then you get the minimum
time of 1 minute. The default time is 15 minutes.
IONIC VENTILATION: This is an optional function. By pressing the
button, this will release negative ions until the end of the operating
time. This does not work by default.
BUTTERFLY ARM: The movable arms can be fixed by pressing this
button. This function can be chosen whilst in operation and once
chosen, the button indicator lights up. After use, it returns to its
initial state.
START/STOP: Once this button is pressed the machine will start
working, by pressing again the machine will stop.
DO NOT USE HAND OR OTHER
THINGS TO HINDER THE
SWINGING ARM WHEN IT IS
WORKING, OR THE SWINGING
ARM WILL BE DAMAGED.
CAUTION

VOLTAGE 230240V
POWER: 1100W, 50HZ
#1580 BUTTERFLY ACCELERATOR PEDESTAL
WARNING: DO NOT USE THIS APPLIANCE
NEAR BATHTUBS, SHOWERS, BASINS OR
OTHER VESSELS CONTAINING WATER.
GENERAL SAFETY
1. Read carefully and keep these instructions in a
safe place.
2. Use this product only for its intended function and
do not use attachments not recommended by the
manufacturer.
3. Do not use outdoors.
PRECAUTIONS
1. Unplug the power before moving the main part
2. In case of electric shock cause by improper use or
short circuit, safe grounding must be ensured.
3. Hold the handle when using the function buttons.
4. Do not wash the surface of the machine with
chemicals.
5. Do not dismantle or repair the machine, which will
lead to operation failure or accidents. It should be
done by professional technical sta.
6. Outlet of above Alternating Current 220-240V (10A)
is required.
ELECTRICAL APPLIANCES
1. DO NOT allow children to operate in this product.
2. Turn the power o and remove the plug when not in
use or when cleaning.
3. Do not let the power cord get damaged in any way.
4. Keep the power cord away from heat sources.
5. Do not use an extension cord unless the cord
complies with local electrical safety standards.
6. Periodically inspect the power cord for signs of
damage.
7. Do not operate any electrical item with a damaged
power cord.
8. Unplug the power when long- time disuse,
unattended or maintenance.
IMPORTANT PLEASE READ THESE SAFETY INSTRUCTIONS
CAUTION: DO NOT USE IF FLEXIBLE CORD IS DAMAGED
ANY REPAIRS TO THIS UNIT MUST BE CONDUCTED BY A QUALIFIED ELECTRICIAN.
TO REPAIR FLEXIBLE CORD, USE TWO CORE SHEATHED CABLE ONLY.
The information contained in this document is subject to change without notice and
should not be construed as a commitment by Comfortel Furniture Pty Ltd.
Comfortel Furniture Pty Ltd. assumes no responsibility for any errors that may appear in
this document nor does it make expressed or implied warranty of any kind with regard
to this material, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose.
Comfortel Furniture Pty Ltd. shall not be liable for incidental or consequential damages
in connection with or arising out of the use of this document and the program material.
PRODUCT CODE
PURCHASE DATE INVOICE NUMBER
NOTE YOUR PURCHASE DATE & INVOICE NUMBER FOR FUTURE REFERENCE
Revision Date: V1.20.08.2019
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
For more information about our products and services, contact us at comfortel.com.au
comfortel.com.au
©Comfortel Furniture. All rights are reserved. No part
of this document may be photocopied, reproduced or
translated to another language without written consent
of Comfortel Furniture Pty Ltd.
WARRANTY PERIOD
PERIOD AND DESCRIPTION PRODUCTS
12 MONTHS PARTS & LABOR All products
2 YEARS PARTS ONLY All products excluding small electrical appliances
3 YEARS PARTS ONLY Linak electric actuators
5 YEARS PARTS ONLY Taps cartridge, ceramic basins
TERMS AND CONDITIONS. For more information about our warranty, please contact us at comfortel.com.au