comfortel CIRCA LED ROUND SALON MIRROR User manual

help.comfortel.com.au
#8181 CIRCA LED ROUND SALON MIRROR
circa LED
salon mirror
owners manual

GET STARTED
All measurements are in MM.
IMPORTANT PLEASE READ THESE SAFETY INSTRUCTIONS
GENERAL SAFETY
1. Read carefully and keep these instructions in a
safe place.
2. Use this product only for its intended function and
do not use attachments not recommended by the
manufacturer.
3. Do not use outdoors.
PLEASE USE CORRECT FIXTURES FOR MOUNTING BASED ON WALL TYPE. NO RESPONSIBILITY
IS ACCEPTED FOR ANY DAMAGE OR INJURY CAUSED BY INCORRECT MOUNTING.
WALL FIXINGS NOT SUPPLIED. PLEASE REFER
TO MIRROR WEIGHT WHEN INSTALLING TO
DETERMINE BEST PRACTICE MOUNTING.
WALL STUDS AND NOGGINS ARE NOT
REQUIRED WHEN INSTALLING MIRRORS
IMPORTANT
ELECTRICAL APPLIANCES
1. All GPO’s must be installed by a qualified Electrician in accordance with local electrical standards.
2. DO NOT allow children to operate this product.
3. Turn the power o when not in use or when cleaning.
5. Do not let the power cord get damaged in any way.
6. Keep the power cord away from heat sources.
7. Do not use an extension cord unless the cord complies with local electrical safety standards.
8. Periodically inspect the power cord for signs of damage.
9. Do not operate any electrical item with a damaged power cord.
WEIGHT
10kg
(22Ilbs)
CIRCA LED
Round Salon Mirror
ø: 900mm (35.5") Depth: 35mm (1.4")
Weight: 10Kg (22Ilbs)
(1.4")
(8.7")
(5.9")
(2.8")
(3.2")
(33") (35.5")
(3.7")
(0.8")

PLEASE USE CORRECT FIXTURES FOR MOUNTING BASED ON WALL TYPE. NO RESPONSIBILITY
IS ACCEPTED FOR ANY DAMAGE OR INJURY CAUSED BY INCORRECT MOUNTING.
POSITION
SIDEBACK
All measurements are in MM.
1680
220
1850
INSTALLATION: RECOMMENDED WALL MOUNTING
RECESSED POWER POINT
- WALL POWER POINT IS
RECOMMENDED.
(55" - 59")
(8.7")
(66.1")
(72.8")
Bench Height:
MAX
100 (4")
850mm (33")
BEFORE INSTALLING YOU SHOULD CONSIDER THE FOLLOWING:
Allow for the necessary room around the unit for free movement. If applicable, when installing a bench, position it
so it is 800mm - 850mm (31.5" - 33") from the floor. This is the recommended bench height. Install mirror above
bench to desired height according to the bench and bench height.
All measurements are in MM (Inches.)

NOTE YOUR PURCHASE DATE & INVOICE NUMBER FOR FUTURE REFERENCE
#8181 CIRCA LED ROUND SALON MIRROR
IMPUT 50/60HZ ~ 1.5A
OUTPUT 12.0V5.0A
The information contained in this document is subject to change without notice and
should not be construed as a commitment by Comfortel Furniture Pty Ltd.
Comfortel Furniture Pty Ltd. assumes no responsibility for any errors that may appear in
this document nor does it make expressed or implied warranty of any kind with regard
to this material, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose.
Comfortel Furniture Pty Ltd. shall not be liable for incidental or consequential damages
in connection with or arising out of the use of this document and the program material.
PRODUCT CODE
PURCHASE DATE INVOICE NUMBER
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
For more information about our products and services, contact us at comfortel.com.au
help.comfortel.com.au
©Comfortel Furniture. All rights are reserved. No part
of this document may be photocopied, reproduced or
translated to another language without written consent
of Comfortel Furniture Pty Ltd.
A periodic inspection of all components and fasteners
should be made to ensure that your Comfortel
product is structurally intact and functioning properly.
Damaged and broken parts should be replaced and
loose fasteners tightened.
All maintenance to be carried out by a suitably
qualified tradesperson.
GENERAL CLEANING
·We recommend the use of soapy water or
approved cleaners.
·This product should not be cleaned with abrasive
materials.
·Damage caused by any improper treatment is not
covered by the product warranty.
MAINTENANCE
CLEANING DIMMING FUNCTION
The LED's can be adjusted to your prefered
brightness.
Press and hold the LED power button to
adjust the dimming of light.
Repeat this operation and the light will brighten.
WARRANTY PERIOD
TERMS AND CONDITIONS. For more information about our warranty, please refer to our website.