comfortel Sarah User manual

#2281 SARAH
sarah
washlounge
comfortel.com.au
owners manual
GET STARTED
WELS RATING
SARAH
Wash Lounge
Total Width:560mm
Internal Seat Width: 470mm
Length: 1160mm
Basin Height: 950mm
Water consumption: 7.5L p/m
FUNCTIONS
· Sit in chair and lay back, the back rest will recline
with body weight.
· Move seat back and forward for client comfort.
All measurements are in mm.

GENERAL SAFETY
1. Read carefully and keep these instructions in a
safe place.
2. Use this product only for its intended function and
do not use attachments not recommended by the
manufacturer.
3. Do not use outdoors.
PLUMBING
1. This unit must be plumbed by a licensed plumber.
IMPORTANT PLEASE READ THESE SAFETY INSTRUCTIONS
DO NOT ALLOW CHILDREN AROUND
THE WASHLOUNGE WHEN IN USE
ALL PLUMBING MUST BE COMPLETED
BY A LICENSED PLUMBER
IMPORTANT
IMPORTANT
ASSEMBLY
WASHLOUNGE ASSEMBLY
1. Washlounge MUST be secured to the floor.
Secure to the floor using 2 x Dyna bolts
(supplied).
BASIN ASSEMBLY
2. Install Flick Mixer using O-ring, plastic and metal
washers & (Long Nut) and Shower Head using
the Showerhose Basin Collar, O-ring, Foam
Washer & Plastic Nut as indicated.
3. Place Flick Mixer and Shower Head Hoses
through the holes.
4. Connect Flexible Waste Pipe to Plug and Waste
which is already installed making use of the
with Flat Seal and fitted Flange.
STAND-BASIN ASSEMBLY PLUMBING CONNECTION
5. Connect Flexible Waste Pipe to P trap (not
supplied) making use of Seal and Flange.
6. Connect hot and cold (½” connection) water
braided hoses to respective supplies
7. Please attach Comfortneck to the basin.
1. Flick Mixer
2. Showerhead
3. Showerhose
basin collar
4. O-ring
5. Flat seal
6. Fitted flange
7. Flexible waste pipe
8. Flange
9. Seal
10. 4 x Dyna Bolts
11. Back cover
12. Long nut
13. Plastic washers
14. Metal washers
15. Foam washers
16. Plastic nut
17. O-ring
DIAGRAM C
BASIN ASSEMBLY
1
4
13
12
14
1615
17
2
3
7
6
5
8
9
10
11

POSITIONING
DIAGRAM A
DIAGRAM B
PLUMBING ACCESS OPTIONS
Determine the best way to connect plumbing.
OPTION A: FROM WALL TO BASIN STAND
From behind the basin stand connect plumbing to the wall
OPTION B: FROM FLOOR TO BASIN STAND
From under the basin stand connect plumbing to the floor
ALL PLUMBING MUST BE COMPLETED
BY A LICENSED PLUMBER
IMPORTANT
If washing from behind, allow a minimum of 400mm of space behind your washlounge to provide room for access.
If washing from side add 400mm. All measurements in mm.
BEFORE INSTALLING YOU SHOULD CONSIDER
THE FOLLOWING
• Allow for the necessary room around the unit for
free movement.
• If installing against a wall, a minimum distance of 80mm
between wall and bottom back of basin is required to
allow free movement of basin.
• If plumbing location is in wall (see Diagram A).
For neatness of finish it is preferable to bring water
and waste into the washlounge in the same hole.
• If plumbing location is on floor (see Diagram A),
place washlounge over.
A
B
Wall
700 250
1160 80
560mm 560 560 560
10050 100 100 50
330 330660660660
2640

The information contained in this document is subject to change without notice and
should not be construed as a commitment by Comfortel Furniture Pty Ltd.
Comfortel Furniture Pty Ltd. assumes no responsibility for any errors that may appear in
this document nor does it make expressed or implied warranty of any kind with regard
to this material, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose.
Comfortel Furniture Pty Ltd. shall not be liable for incidental or consequential damages
in connection with or arising out of the use of this document and the program material.
PRODUCT CODE
PURCHASE DATE INVOICE NUMBER
NOTE YOUR PURCHASE DATE & INVOICE NUMBER FOR FUTURE REFERENCE
Revision Date: 28.06.2017
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
For more information about our products and services, contact us at comfortel.com.au
comfortel.com.au
#2281 SARAH HAIRDRESSING BASIN
WELS RATING
PERIOD AND DESCRIPTION PRODUCTS
12 MONTHS PARTS & LABOR All products
2 YEARS PARTS ONLY All products excluding small electrical appliances
3 YEARS PARTS ONLY All electric actuators
5 YEARS PARTS ONLY Taps cartridge, Ceramic basins
10 YEARS PARTS ONLY Gas-lifts and gas-lift swivel plates
TERMS AND CONDITIONS
For more information about our warranty, please contact us at comfortel.com.au.
WARRANTY PERIOD
A periodic inspection of all
components and fasteners should be
made to ensure that your Comfortel
Product is structurally intact and
functioning properly.
Damaged and broken parts should
be replaced and loose fasteners
tightened.
All maintenance to be carried out by
a suitably qualified tradesperson.
UPHOLSTERY
· All upholstery needs some care; good housekeeping will help to prolong
the life of any upholstered products.
· Avoid extreme temperatures. Extreme cold can make your vinyl prone to
cracking, while extreme heat can cause permanent stretching.
· Avoid exposing to direct sunlight for prolonged periods of time.
ALWAYS FOLLOW THE CLEANING INSTRUCTIONS
· Clean regularly (weekly) to remove body oils which cause hardening
· To clean use a sponge which has been moistened in warm soapy water
· After cleaning with a sponge, dry with a soft, clean cloth
· Stubborn grime may require gentle scrubbing with a soft brush
Do not use:
·acetone ·furniture polishes ·bleach
·detergent ·abrasive cleaners ·steel wool
Damage caused by any improper treatment of this product is not covered
by the product warranty
CLEANINGMAINTENANCE
HOW TO CHANGE A SHOWERHEAD
Please view our online video on how
to change a showerhead:
www.youtube.com/user/Comfortel
©Comfortel Furniture 1997-2017. All rights are reserved.
No part of this document may be photocopied,
reproduced or translated to another language without
written consent of Comfortel Furniture Pty Ltd.