Commell LP-180 User manual

LP-180
Pico-ITX
User’s Manual
2012/02/23
Version:1.0

LE-380 User’s Manual
-1-
Copyright
Copyright 2012. All rights reserved. This document is copyrighted and all rights are
reserved. The information in this document is subject to change without prior notice to
make improvements to the products.
This document contains proprietary information and protected by copyright. No part of
this document may be reproduced, copied, or translated in any form or any means
without prior written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property of
their respective owners. Disclaimer
The company shall not be liable for any incidental or consequential damages resulting
from the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including
without limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to
notify any person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT

LE-380 User’s Manual
-2-
Packing List:
Please check the package content before you starting using the board.
Hardware:
LE-380 3.5“ Miniboard x 1
Cable Kit:
Optional Cable Kit:
Printed Matters:
Driver CD x 1 (Including User’s Manual)
Audio Cable x 1
(OALPJ-HDUNB)
PS/2 keyboard & mouse cable x 1
(OALPS2/MK)
USB Cable x 1
(OALUSBA-3)
Dual COM PORT cable
(OALES-BKU2NB)
DVI Module With DVI Cable x 1
(BADPDVI-A + OALDVI-DF13)
Panel Inverter Cable x 1
(OALINV-5P-L15)
SATA Cable x 1
(OALSATA22B-PM15SH15)
DC_IN Power Cable x 1
(OALDC-B)
LP-170D/X Heatsink with Fan x 1
(OHS-180)

LE-380 User’s Manual
-3-
Index
Chapter 1 <Introduction>.................................................................................6
1.1 <Product Overview>..............................................................................................6
1.2 <Product Specification>........................................................................................7
1.3 <Mechanical Drawing>.........................................................................................9
1.4 <Block Diagram> ................................................................................................10
Chapter 2 <Hardware Setup>......................................................................... 11
2.1 <Connector Location>.........................................................................................11
2.2 <Jumper Reference>............................................................................................13
2.3 <Connector Reference>.......................................................................................14
2.3.1 <Internal Connector> ........................................................................14
2.3.2 <External Connector>.......................................................................14
2.4 <CPU and Memory Setup>..................................................................................15
2.5 <CMOS & ATX Setup>......................................................................................16
2.6 <SATA & CFast Interface>.................................................................................17
2.8 <LAN Interface> .................................................................................................18
2.9 <Onboard Display Interface> ..............................................................................19
2.9.1 <Analog VGA Interface>..................................................................19
2.9.2 <Digital Display> (LP-180X) ...........................................................20
2.9.3 <DVI Interface > (LP-180D).............................................................24
2.10 <Onboard Audio Interface>...............................................................................25
2.11 <USB2.0 Interface>...........................................................................................26
2.12 <GPIO Interface> ..............................................................................................27
2.13 <Serial Port Jumper Setting >............................................................................28
2.14 <Power & FAN Connector >.............................................................................29
2.14.1 <Power Input>.................................................................................29
2.14.2 <Power Output>..............................................................................30
2.14.3 <Fan Connector>.............................................................................30
2.15 <Indicator and Switch>......................................................................................31
Chapter 3 <BIOS Setup> ................................................................................33

LE-380 User’s Manual
-4-
Appendix A <I/O Port Pin Assignment> .......................................................35
A.1 <SATA Port> .....................................................................................................35
A.2 < CRT Port > ......................................................................................................35
A.3 <LAN Port>........................................................................................................35
A.4 <LAN LED Port>...............................................................................................36
A.5 <LPC Port> ........................................................................................................36
Appendix B <Flash BIOS>..............................................................................37
B.1 BIOS Auto Flash Tool.........................................................................................37
B.2 Flash Method......................................................................................................37
Appendix C <System Resources> ................................................................38
C.1 <I/O PortAddress Map>.....................................................................................38
C.2 <Memory Address Map >...................................................................................40
C.3 < System IRQ Resources >.................................................................................42
Appendix D <Watch Dog timer Setting >......................................................44
Appendix E <AMD Hing Definition Audio Device > .....................................45
Contact Information........................................................................................47

LE-380 User’s Manual
-5-
(This page is left for blank)

LE-380 User’s Manual
-6-
Chapter 1 <Introduction>
1.1 <Product Overview>
LP-180 is the PICO-ITX miniboard with AMD G-T56N platform, with onboard VGA,
Realtek ALC888 HD Codec audio, Giga LAN interface. Based on the AMD G-T56N
Processor , the board provides many advanced features for reduced power
consumption.
A55E Chipset
The board integrates AMD A55E, to provide built-in UniChrome Pro 3D / 2D Graphics
with MPEGII decoder, and supports DDR3 1066/1333 memory up to 4G of capacity.
18-bit LVDS LCD interface
The board provides onboard 18-bit LVDS LCD interface, supports up to 1400 x 1050 of
UXGA high resolution.
Flexible Extension Interface
The board also provides one Mini card socket.

LE-380 User’s Manual
-7-
1.2 <Product Specification>
General Specification
Form Factor PICO-ITX miniboard
CPU AMD G-Series T56N Processor 1.65GHz
Memory 1 x 204-pin DDR3 1066/1333 SO-DIMM SDRAM up to 4G
Chipset AMD A55E FCH
Watchdog Timer System reset programmable watchdog timer with 1 ~ 255
sec./min. of timeout value
Real Time Clock Chipset integrated RTC with onboard lithium battery
Serial ATA 1 x serial ATAII interface with 300MB/s transfer rate
(Only 2.5” HDD and No RAID Function)
Multi-I/O Port
Chipset Winbond W83627DHG-P
Serial Port Two RS-232 serial port
USB Port Four Hi-Speed USB 2.0 ports with 480Mbps of transfer rate
K/B & Mouse PS/2 keyboard and mouse port
VGA Display Interface
Chipset AMD G-Series T56N Processor
Frame Buffer Up to 512MB shared with system memory
Display Type CRT, LCD monitor with analog display, single channel
LVDS(LP-180X), DVI(LP-180D)
Connector External DB15 female connector
Onboard 20-Pin LVDS and 5-Pin inverter connector
(LP-180X)
Onboard 20-Pin DVI (LP-180D)
Ethernet Interface
Controller 1 x Intel® 82583V Gigabit Ethernet controller
Type Triple speed 10/100/1000Base-T
auto-switching Fast Ethernet
Full duplex, IEEE802.3U compliant
Connector One External RJ45 connector with LED
Audio Interface
Chipset REALTEK ALC888
Interface Stereo audio Line-out and MIC-in
Connector Onboard audio connector with pin header
Expansive Interface
PCIE Mini Card 1 x PCIE Mini Card socket
Power and Environment
Power Requirement DC +5V input with onboard 2-pin connector

LE-380 User’s Manual
-8-
Dimension 100 (L) x 72(H) mm
Temperature Operating within 0 ~ 60℃
Storage within -20 ~ 85℃
Ordering Code
LP-180D Same as LP-180 but without VGA, support DVI
LP-180X Same as LP-180 but without VGA, support Chipset
Integrated 18-bit single channel LVDS
The specifications may be different as the actual production.
For further product information please visit the website at TUhttp://www.commell.com.twUT

LE-380 User’s Manual
-9-
1.3 <Mechanical Drawing>

LE-380 User’s Manual
-10-
W83627DHG-P
CRT / DVI / LVDS DDR3 SODIMM 4GB max.
2 x Serial Port
PS2 KB/MS
Mini card socket
Giga LAN
1 x SATA
4 x USB port
HD Audio
1.4 <Block Diagram>
AMD
G-T56N
A55E

LE-380 User’s Manual
-11-
CN_LPC
CN AUDIO
CN_USB2
CN_USB1
Chapter 2 <Hardware Setup>
2.1 <Connector Location>
CN_SATA
CN_DDP
CPUFAN
SYSFAN
JFRNT
MINI_CARD
DC_IN
CN_COM1/2

LE-380 User’s Manual
-12-
RJ45 PS2 CRT
CN_INV
DC_OUT
SO-DIMM
LP-180

LE-380 User’s Manual
-13-
JAT
2.2 <Jumper Reference>
Jumper Function
JRTC CMOS Operating/Clear Setting
JAT AT/ATX Mode Setting
JVLCD LCD Panel Voltage Setting
JRTC
JVLCD

LE-380 User’s Manual
-14-
2.3 <Connector Reference>
2.3.1 <Internal Connector>
Connector Function Remark
SO-DIMM 204 -pin DDR3 SO-DIMM SDRAM slot
CN_SATA 10-pin SATA Cable connector
MINI_CARD PCIE mini card socket
CN_DDP 20 -pin LVDS connector(LP-180X)
20 -pin DVI connector(LP-180D)
CN_INV 5-pin LCD inverter connector(LP-180X)
CN_USB1/2 5 x 2-pin USB connector
CN_AUDIO 5 x 2-pin audio connector
CN_LPC 5 x 2-pin header for LPC Port
JFRNT 10-pin switch/indicator connector
CPUFAN 4-pin CPU cooler fan connector
SYSFAN 3-pin system cooler fan connector
DC_OUT 6-pin power output connector
DC_IN DC input connector
2.3.2 <External Connector>
Connector Function Remark
CRT DB15 VGA connector
PS2 PS/2 keyboard and mouse connector
RJ45 RJ45 LAN connector

LE-380 User’s Manual
-15-
2.4 <CPU and Memory Setup>
The board provides one 204-pin DDR3 SO-DIMM to support DDR3 1066/1333 memory
modules up to 4GB.
SO-DIMM

LE-380 User’s Manual
-16-
JAT
2.5 <CMOS & ATX Setup>
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to
inappropriate CMOS settings, please remove battery to clear (reset) the CMOS to its
default values.
The board has a jumper to switch AT power mode (automatic power on) or standard
ATX mode.
Jumper: JAT
Type: onboard 3-pin jumper
JAT Mode
1-2 AT Mode
2-3 ATX Mode
Default setting
Jumper: JRTC
Type: onboard 3-pin jumper
JRTC Mode
1-2 Clear CMOS
2-3 Normal Operation
Default setting
Battery
3 1
JRTC
3 1

LE-380 User’s Manual
-17-
2.6 <SATA & CFast Interface>
Based on AMDA55E, the board provides one Serial ATAII interfaces with up to 300MB/s
of transfer rate.
Remark: Only catch 2.5” HDD
CN_SATA
DC_OUT

LE-380 User’s Manual
-18-
2.8 <LAN Interface>
The Intel® 82583V supports triple speed of 10/100/1000Base-T, with IEEE802.3
compliance and Wake-On-LAN supported.
LAN