Commell LE-5Q0 series User manual

LE-5Q0
Qseven Carrier Board
User's Manual
Edition 1.3
2017/11/27

LE-5Q0 User’s Manual
-1-
Copyright
Copyright 2013, all rights reserved. This document is copyrighted and all rights are reserved.
The information in this document is subject to change without prior notice to make
improvements to the products.
This document contains proprietary information and protected by copyright. No part of this
document may be reproduced, copied, or translated in any form or any means without prior
written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property of their
respective owners. Disclaimer
The company shall not be liable for any incidental or consequential damages resulting from the
performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including without
limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications of the
product described within it at any time without notice and without obligation to notify any person
of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT

LE-5Q0 User’s Manual
-2-
Packing List:
Please check the package content before you starting using the board.
Optional:
1 x LE-5Q0 Motherboard
2 x SATA Cable
(OALSATA3-L / 1040529)
1 x Power Cable
(OALATX-P3S2 / 1040058)
1 x USB2.0 Cable
(OALUSBA-3 / 1040173)
1 x Dual COM port Cable
(OALE-BKU2NB / 1040090)
1 x PS/2 Keyboard & Mouse Cable
(OALPS2/KM) / (1040131)
1 x COM PORT CABLE
(OALES-BKU1NB / 1040086)
1 xAudio Cable
(OALPJ-HDUNB) / (1040123)

LE-5Q0 User’s Manual
-3-
Index
Chapter 1 <Introduction>.................................................................4
1.1 <Product Specification> ...............................................................4
1.2 <Mechanical Drawing>.................................................................5
1.3 <Block Diagram>...........................................................................6
Chapter 2 <Hardware setup>...........................................................7
2.1 <Connector Location and Reference>.......................................7
2.1.1 <Internal connectors list> .................................................8
2.1.2 <External connectors list>................................................8
2.2 <Jumper Location and Reference>............................................9
2.2.1 <Jumper list>......................................................................9
2.3 <Clear CMOS and Power on type selection>.........................10
2.4 <I/O interface>.............................................................................11
2.4.1 <Ethernet interface>........................................................11
2.4.2 <Display interface>..........................................................11
2.4.3 <Audio interface>.............................................................14
2.4.4 <USB interface>...............................................................15
2.4.5 <Serial Port interface>....................................................17
2.4.6 <Expansion slot> .............................................................20
2.4.7 <Switch and indicator>....................................................22
2.4.8 <GPIO and Other interface>..........................................23
2.5 <Power supply>...........................................................................25
2.5.1 <Power input>..................................................................25
Appendix A .....................................................................................27
Appendix A <I/O Port Pin Assignment>..........................................27
A.1 <Serial ATA Port>................................................................27
A.2 <LAN Port>..........................................................................27
A.3 <SDIO / MMC socket>.......................................................27

LE-5Q0 User’s Manual
-4-
Chapter 1 <Introduction>
1.1 <Product Specification>
System
Form Factor
5.25" Qseven Carrier Board
QSEVEN
Base on Qseven Specification Rev. 2.0
SPI
Support 1.8V / 3.3V (Default 1.8V)
Expansion
2 x Mini PCIe (card2 support mSATA) (optional), 1 x SIM slot, 1 x SDIO slot
LAN
Chip
4 x Intel® I210-AT Gigabit LAN (optional)
(RJ45-4 and Minicard1 can’t be enabled simultaneously)
(RJ45-5 and Minicard2 can’t be enabled simultaneously)
1 x Gigabit Ethernet Lan port (optional) (Use GBE signal)
I/O
Serial ATA
2 x Serial ATA ports
(SATA2 port and mSATA can’t be enabled simultaneously)
Audio
Realtek ALC262 High Definition Audio Codec
Digital I/O
Programmable 8-bit GPIO with 12 pin-header
Internal I/O
2 x SATA , 4 x RS232, 1 x RS232/422/485, 2 x USB2.0, 1 x PS/2, 1 x I2C,
1 x Audio, 2 x LVDS (optional), 2 x LCD inverter, 1 x LPC, 1 x SMBUS,
1 x DIO (LVDS1 and Display port2 can’t be enabled simultaneously)
(LVDS2 and Display port3 can’t be enabled simultaneously)
External I/O
1 x RS232, 1 x DVI-I or DisplayPort, 2 x DisplayPort (optional), 2 x USB3.0
Mechanical & Environmental
Power Requirement
Standard 24-pin ATX power supply or 6~27V full range DC Input
Size & Thickness
203mm x 146mm. (L x W)
Temperature
Operating within 0°C~60°C (32°F~140°F)
Storage within -20°C~80°C (-4°F~176°F)
Relative Humidity
10% ~ 90%, non-condensing
Ordering Code
LE-5Q0G2XD
(for QE-E70)
LE-5Q0G3XPD
(for QE-E71)
1 x DVI / DisplayPort exclusive,1 x LVDS, 2 x USB3.0, 4 x USB2.0, SMBus,
2 x RJ45 LAN, 2 x SATA, SD Card, GPIO, SPI, LPC, I2C, PS2, AUDIO,
2 x MiniPCIe (option one for mSATA ), 5 x RS232, 1 x RS232/RS422/RS485
1 x DVI / DisplayPort exclusive,1 x LVDS, 2 x USB3.0, 4 x USB2.0, SMBus,
3 x RJ45 LAN, 2 x SATA, GPIO, SPI, LPC, PS2, AUDIO,
2 x MiniPCIe (option one for mSATA ), 5 x RS232, 1 x RS232/RS422/RS485

LE-5Q0 User’s Manual
-5-
1.2 <Mechanical Drawing>

LE-5Q0 User’s Manual
-6-
1.3 <Block Diagram>

LE-5Q0 User’s Manual
-7-
Chapter 2 <Hardware setup>
2.1 <Connector Location and Reference>
CN_AUDIO
CN_DIO
CN_PS2
CN_LPC
CPUFAN
CN_I2C
CN_COM5/6
CN_COM3/4
CN_COM2
CN_SMBUS
CN_USB1
CN_USB2
JAT
JFRNT
CN_CANBUS
JRTC
JMSATA
JUSBS
JP1
JCSEL2
JP2
JCSEL1
JSPD2
JSPD3
JACT2
JACT3
JVLCD
CN_LVDS1
MINI
CARD2
MINI
CARD1
MXM
RJ45 - 4/5
DC_IN
CN_INV1
ATX
COM1
DC_2P
RJ45 - 2/3
RJ45 - 1
USB3.0/2.0
DP 2/3
DVI
DP 1

LE-5Q0 User’s Manual
-8-
2.1.1 <Internal connectors list>
Connector
Function
MXM
230-pin MXM connector (Connector Pinout Description)
DC_IN
DC 6~27V input connector
DC_2P
DC 6~27V input connector
ATX
24-pin power supply connector
CN_LVDS 1/2
20 x 2-pin LVDS connector
CN_INV 1/2
5-pin LCD inverter connector
JFRNT
20 x 2-pin LVDS connector
CN_USB 1/2
10-pin USB connector
CPUFAN
4-pin CPU cooler fan connector
SYSFAN
4-pin system cooler fan connector
SATA 1/2
7-pin Serial ATAII connector
CN_CANBus
4-pin CANBUS connector
Mini-PCIE 1/2
52-pin Mini-PCIE socket
SDCard
13-pin SDIO / 30-pin MMC socket
CN_SMBUS
5-pin SMBUS connector
CN_AUDIO
5 x 2-pin audio connector
CN_PS2
5 x 2-pin PS2 connector
CN_LPC
5 x 2-pin LPC connector
CN_DIO
6 x 2-pin digital I/O connector
CN_COM2/3/4/5/6
9-pin COM2-RS232/442/485 COM3/4/5/6-RS232
SIM
6-pin socket
JSPD 1/2/3/4/5
LAN Speed LED connector
JACT 1/2/3/4/5
LAN Activity LED connector
SPI2
8-pin BIOS connector
SPI2X
8-pin BIOS connector
2.1.2 <External connectors list>
Connector
Function
COM1
DB9 male connector
RJ45 1/2/3/4/5
5 x RJ45 LAN connector
DVI
24 pin DVI connector
DisplayPort 1/2/3
3 x 20-pin DisplayPort connector

LE-5Q0 User’s Manual
-9-
2.2 <Jumper Location and Reference>
2.2.1 <Jumper list>
Jumper
Function
JAT
Power mode select
JRTC
CMOS Normal/Clear Setting
JUSBS
Mini Card2 USB Setting
JVLCD
Panel Voltage Setting
JMSATA
MiniCard2 mSATA Setting
JCSEL1
COM2 RS-232, RS422, RS485 setting
JCSEL2
COM2 RS-232, RS422, RS485 setting
JP1
Com2 Voltage Setting (For Pin 9)
JP2
Com1 Voltage Setting (For Pin 9)
Mini Card2 USB and CN_USB2 (USB7) can’t be enabled simultaneously
Mini Card2 and RJ45-5 LAN port can’t be enabled simultaneously
JMSATA
JAT
JRTC
JUSBS
JP1
JCSEL2
JP2
JCSEL1
JVLCD

LE-5Q0 User’s Manual
-10-
2.3 <Clear CMOS and Power on type selection>
JRTC: Clear CMOS data jumper
Jumper settings
Function
1-2
Clear CMOS
2-3
Normal (Default)
JAT: AT/ATX mode select jumper
Jumper settings
Function
1-2
AT mode
2-3
ATX mode (Default)
JAT
JRTC
1
1
3
3

LE-5Q0 User’s Manual
-11-
2.4 <I/O interface>
2.4.1 <Ethernet interface>
The board integrates RJ45-2/3/4/5 (optional) with Intel I210 Gigabit Ethernet and
RJ45-1 with Qseven CPU Module provided , RJ45-2/3/4/5 as the PCI Express bus.
The Intel I210 supports triple speed of 10/100/1000 Base-T, with IEEE802.3
compliance and Wake-On-LAN supported.
Mini_card1 and RJ45-4 LAN port can’t be enabled simultaneously
Mini_card2 and RJ45-5 LAN port can’t be enabled simultaneously
2.4.2 <Display interface>
The board provides one DVI or Display port connector & two Display port(optional) on
real external I/O port, two 40-pin LVDS interface with 5-pin LCD backlight inverter
connector.
2.4.2.1 <DVI /Display port>
Please connect your DVI / Display port or LCD monitor with male connector to the
onboard female connector on rear I/O port.
DP2
DP3
DP1
DVI
RJ45 –4/5
RJ45 –2/3
RJ45 - 1

LE-5Q0 User’s Manual
-12-
2.4.2.2 <LVDS>
The board provides two 40-pin LVDS connector(optional), with two LCD backlight
inverter connector (optional)and one jumper for panel voltage setting. Please install
LVDS cable before boot up.
JVLCD: LVDS panel power select jumper
Jumper settings
Function
1-2
3.3V (Default)
3-4
5V
5-6
12V
Effective patterns of connection:1-2 / 3-4 5-6 ,Other may cause damage .
CN_LVDS1
1
40
1
CN_INV
1
2
39
2
5
6
5
JVLCD

LE-5Q0 User’s Manual
-13-
CN_LVDS: LVDS 40-pin connector (Model: HIROSE DF13-40DP-1.25V compatible)
Pin
Signal
Pin
Signal
2
Set by JVLCD
1
Set by JVLCD
4
GND
3
GND
6
A_LVDS_0-
5
B_LVDS_0-
8
A_LVDS_0+
7
B_LVDS_0+
10
GND
9
GND
12
A_LVDS_1-
11
B_LVDS_1-
14
A_LVDS_1+
13
B_LVDS_1+
16
GND
15
GND
18
A_LVDS_2-
17
B_LVDS_2-
20
A_LVDS_2+
19
B_LVDS_2+
22
GND
21
GND
24
A_LVDS_CLK-
23
B_LVDS_3-
26
A_LVDS_CLK+
25
B_LVDS_3+
28
GND
27
GND
30
A_LVDS_3-
29
B_LVDS_CLK-
32
A_LVDS_3+
31
B_LVDS_CLK+
34
GND
33
GND
36
LVDS_DDCSCL
35
NC
38
LVDS_DDCSDA
37
NC
40
NC
39
NC
CN_INV: LVDS 5-pin Backlight power header
Pin
Signal
1
12V
2
Backlight Control
3
GND
4
GND
5
Enable Backlight

LE-5Q0 User’s Manual
-14-
2.4.3 <Audio interface>
The board integrated onboard audio interface with Realtek ALC262 code, with Intel
next generation of audio standard as High Definition Audio, it offers more vivid sound
and other advantages than former HD audio compliance.
The main specifications of ALC262 are:
-High-performance DACs with 100dB S/N ratio.
-2 DAC channels support 16/20/24-bit PCM format for 2 audio solutions.
-Compatible with HD.
-Meets Microsoft WHQL/WLP 2.0 audio requirements.
CN_AUDIO: Front panel audio 10-pin header (Pitch 2.54mm)
Pin
Signal
Pin
Signal
1
MIC_L
2
GND
3
MIC_R
4
NC
5
FP_OUT_R
6
MIC_DETECT
7
SENSE
8
Key
9
FP_OUT_L
10
FP_OUT_DETECT
CN_AUDIO
1
10
2
9

LE-5Q0 User’s Manual
-15-
2.4.4 <USB interface>
LE-5Q0 integrates 2 x USB3.0 / 2.0, The specifications of USB3.0 are listed below:
Interface
USB3.0
Transfer Rate
Up to 5Gb/s
Voltage
5V
The specifications of USB2.0 are list:
Interface
USB2.0
Transfer Rate
Up to 480Mb/s
Voltage
5V
Connector: CN_USB1/2
Type: 10-pin (2 x 5) header (pitch = 2.54mm)
Pin
Description
Pin
Description
1
VCC (5V)
2
VCC (5V)
3
Data0-
4
Data1-
5
Data0+
6
Data1+
7
Ground
8
Ground
9
Ground
10
N/C
USB3.0/2.0

LE-5Q0 User’s Manual
-16-
Connector: JUSBS
Type: 3-pin Power select jumper
Pin
Description
1-2
USB7
2-3
Mini Card2 USB
Default: 2-3
Note:
Mini Card2 USB and CN_USB2 (USB7) can’t be enabled simultaneously
1
2
9
10
CN_USB2-1/2
Type: USB2.0, 5VSB
1
3
JUSBS

LE-5Q0 User’s Manual
-17-
2.4.5 <Serial Port interface>
The board supports five RS232 serial port and one jumper selectable RS232/422/485 serial
ports. The jumper JCSEL1 & JCSEL2 can let you configure the communicating modes for
CN_COM2.
1
JCSEL1
1
1
1
6
COM5/6
1
20
20
1
COM3/4
2
5
5
11
5
2
19
2
19
COM2
6
12
JP2
6
2
2
2
JCSEL2
JP1
2
9
10
1

LE-5Q0 User’s Manual
-18-
COM1: RS232 DB9 connector
Pin
Signal
Pin
Signal
1
DCD
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
Set by JP1
COM2: RS232/422/485 connector
Pin
Signal
Pin
Signal
1
DCD/ 422TX-/ 485-
2
RXD/ 422TX+/ 485+
3
TXD/ 422RX+
4
DTR/ 422RX-
5
GND
6
DSR
7
RTS
8
CTS
9
Set by JP2
COM3/4: COM 20-pin header (Pitch 2.54 x 1.27mm)
Pin
Signal
Pin
Signal
1
DCD1
2
RXD1
3
TXD1
4
DTR1
5
GND
6
DSR1
7
RTS1
8
CTS1
9
COM3 Set by JP3
10
NC
11
DCD2
12
RXD2
13
TXD2
14
DTR2
15
GND
16
DSR2
17
RTS2
18
CTS2
19
COM4 Set by JP4
20
Key
COM5/6: COM 20-pin header (Pitch 2.54 x 1.27mm)
Pin
Signal
Pin
Signal
1
DCD1
2
RXD1
3
TXD1
4
DTR1
5
GND
6
DSR1
7
RTS1
8
CTS1
9
RI1
10
NC
11
DCD2
12
RXD2
13
TXD2
14
DTR2
15
GND
16
DSR2
17
RTS2
18
CTS2
19
RI2
20
Key

LE-5Q0 User’s Manual
-19-
JP1(COM2), JP2(COM1): pin-9 setting
Jumper settings
Function
1-2
5V
3-4
12V
5-6
RI (Default)
Effective patterns of connection: 1-2 / 3-4 / 5-6
Other may cause damage
JCSEL1, JCSEL2: For configure COM2 communication mode
Function
JCSEL2
JCSEL1
RS-422
RS-485
RS-232
(Default)