Commlite CM-EF-EOSR VCPL User manual

User Manual
CM-EF-EOSR VCPL
AF Mount Adapter from EF/EF-S Lens
to EOSR/RF Camera with Variable CPL
EXIF
Transmitting
Support
Auto-focus
Electronic
Aperture Control
IS
Function
Variable CPL

Description
Notice
Main Features
1.Drop-in Variable Circular Polarizer Filter A
2.Support EXIF INFO. Transmitting
3.Support Auto-focus Function
4.Electronic Aperture Control
5.Support IS Image Stabilization Function
6.Full Metal Made, Powerful and Stable
Thanks for purchasing Commlite CM-EF-EOSR VCPL
1.Some functions of EF lenses may not be supported due to camera
specifications
2.The closest focus distance, maximum magnification and view angle of the
mounted lens will be changed slightly after adapting
3.This product is waterproof. However, It is not recommended for use under
rain
1

Components
Lens Connecting Side
Camera Connecting Side
Metal Signal Contact
Lens Mounting Mark
Metal Signal Contact
Lens Release Button
Polarizer Rotation Wheel
Polarizer Release Button
2

Camera Connecting Side CapLens Connecting Side Cap
Polarizer
Polarizer is a type of color filter, it is useful for minimizing reflections and
glare, and enhances overall color and tonal saturation by filtering out light
that has become polarized due to reflection from a non-metallic surface.
It also helps to lessen haze in distant landscapes and increase apparent
contrast.
3

Assemble and Disassemble
1. Assemble
Step1. Connect the EF/EF-S lens to CM-EF-EOSR VCPL
Refer to the follow illustration, press down the ‘lens release button’ of
the mount adapter, align the EF/EF-S lens mounting mark to the
corresponding mark on the mount adapter, and turn clockwise until
tightened
4

Step2. Connect the CM-EF-EOSR VCPL to EOSR/RF camera
Refer to the follow illustration, press down the ‘lens release button’ of
the EOSR/RF camera, align the red mark on the mount adapter to the
red mark on the camera, and turn clockwise until tightened
Using the polarizer rotation wheel on the adapter,
users could change the polarizing angle of the
circular polarizer for the desired effect.
5

2. Disassemble
Step1. Turn off the camera, then take off the CM-EF-EOSR VCPL
Refer to the follow illustration, press down the ‘lens release button’ of
EOSR/RF camera, turn counterclockwise the mount adapter until it can
be easily taken off
6

Step2. Take off the EF/EF-S lens from the CM-EF-EOSR VCPL
Refer to the follow illustration, press down the ‘lens release button’ of
the mount adapter, turn counterclockwise the EF/EF-S lens until it can
be easily taken off
7

Specification
Compatible Lens
Compatible Camera
Front Installation
Rear Installation
Camera-Mount Outer Diameter
Lens-Mount Outer Diameter
Length
Net Weight
EF/EF-S Series Lens
EOSR/RF Camera
EF/EF-S Series Lens
EOSR/RF Camera
67mm
65mm
30mm
121g
8

产品使用说明书
CM-EF-EOSR VCPL
EF/EF-S镜头转佳能EOSR/RF微单转接环（含CPL）
EXIF 信息偏振镜可调 可自动对焦 电子可调光圈 防抖功能

描 述
注意事项
主要功能
1.插入式圆形偏振镜可调
2.支持EXIF信息传输
3.支持AF自动对焦
4.电子光圈可调
5.支持IS防抖功能
6.金属材质，稳固耐用
感谢您购买咔莱CM-EF-EOSR VCPL
1.根据相机规格的不同，部分EF镜头的功能可能无法使用
2.转接后所安装镜头的最近对焦距离、最大放大倍率和视角会略产生变化
3.本产品虽然具有一定的防水滴性能，但是在雨天拍摄时，请尽量不要淋湿
1

部件名称
镜头连接端
相机连接端
电子信号触点
镜头安装标记
电子信号触点
镜头释放拨杆
偏振镜调节旋钮
偏振镜释放按钮
2

相机端保护盖镜头端保护盖
偏振镜
偏振镜,也叫偏光镜，是一种滤色镜。偏振镜的除色功用是能有选择地让某
个方向振动的光线通过,在彩色和黑白摄影中常用来消除或减弱非金属表面
的强反光，从而消除或减轻光斑
3

安装及拆卸转接环
1. 安装
步骤1. 将EF/EF-S卡口镜头安装到CM-EF-EOSR VCPL上
如图，按下转接环上的镜头释放拔杆，将EF/EF-S镜头上的红色标记对
准转接环镜头端卡口上的相应标记，顺时针方向旋入至拧紧为止
4

步骤2. 将CM-EF-EOSR VCPL安装到EOSR/RF卡口相机
如图，按下EOSR/RF卡口相机上的镜头释放按钮，将转接环上的红色标
记对准相机端卡口处的红色标记，顺时针方向旋入至拧紧为止
使用转接环上的偏振镜调节旋钮可改变偏振镜的
偏光角度，以满足您不同的拍摄需求
5

2. 拆卸
步骤1. 关闭相机，然后将CM-EF-EOSR VCPL从EOSR/RF卡口相机上取下
如图，按下EOSR/RF卡口相机的镜头释放按钮，逆时针旋转转接环直至
可轻松取下为止
6

步骤2. 将EF/EF-S镜头从CM-EF-EOSR VCPL上取下
如图，按下转接环的镜头释放拨杆，逆时针旋转镜头直至可轻松取下为止
7

规格与技术参数
兼容镜头
兼容相机
正面安装
背面安装
相机端外围直径
镜头端外围直径
总长度
重量
EF/EF-S系列镜头
佳能EOSR/RF卡口机身
EF/EF-S系列镜头
佳能EOSR/RF卡口机身
67mm
65mm
30mm
121克
8