Commlite CM-MET-E User manual

CM-MET-E
Automatic Macro Extension Tube for E-Mount Camera
User Manual

Description
Automatic Macro Extension Tube for E-Mount camera is composed by two
different ring(10mm, 16mm) which can be used alone or combined (3
Different Combinations) to meet your needs for different close-up magnifica-
tion. The connector is designed with new electronic technology, which can
help you to achieve Auto-focus and TTL Exposure functions, it also supports
Full-Frame Shooting. It is a wonderful partner for Sony E-Mount lens and
camera used for Macro Shooting !
1
Notice
Extension Tube is only suitable for macro shooting, it can't focus infinitely
after installing
The focusing distance is limited after installing Extension Tube, and the
focusing range is different with different focal lengths so you can adjust
the focal length by changing the distance between the object and the
camera or by operating the zoom device of the main lens
Take care that the exposure needs to be increased after installing
Extension Tube (The use of tripod and flash is advisable)
Support Auto-focus, it's best to switch to manual focus mode if the
subject’s depth becomes shallow

Main Features
Components
Lens Mounting Mark
Metal Signal Contact
Metal Signal Contact
Lens Release Button
Lens Connecting SideCamera Connecting Side
1. Support Exact TTL Exposure and Auto-focus
2. Built-in Electronic Pins and Internal Driver
3. Support All NEX Series and Full-Frame E-Mount Cameras
4. Made of High-quality Aluminum Alloy, Powerful and Stable
5. Including Two Tubes(10mm, 16mm), 3 Different Combinations
6. New Electronic Technology, Convenient for Macro Shooting
7. Compact and Delicate
2

Assemble and Disassemble
1. Assemble
Refer to the follow illustration, press down the ‘lens release button’ of
the Extension Tube, align the red mark on the E-Mount lens to the
corresponding mark on the Extension Tube, and turn clockwise until
tightened
Step 1. Connect the E-Mount lens to CM-MET-E Automatic Macro Extension
Tube
3

Step 2. Connect the Extension Tube to E-Mount camera
Refer to the follow illustration, press down the ‘lens release button’ of
the E-Mount camera, align the red mark on the Extension Tube to the
corresponding mark on the camera, and turn clockwise until tightened
4

2. Disassemble
Step 1. Turn off the camera power, then take off the Extension Tube which is
connected with E-Mount lens from E-Mount camera
Refer to the follow illustration, press down the ‘lens release button’ of
the E-Mount camera, turn counterclockwise the Extension Tube
which is connected with E-Mount lens until it can be easily taken off
5

Step 2. Take off the E-Mount lens from the Extension Tube
Refer to the follow illustration, press down the ‘lens release button’ of
the Extension Tube, turn counterclockwise the E-Mount lens until it
can be easily taken off
6

Specification
Compatible Lens
Compatible Camera
Front Installation
Rear Installation
Camera-Mount Outer Diameter
Lens-Mount Outer Diameter
Length
Net Weight
E-Mount Lens
E-Mount Camera
E-Mount Lens
E-Mount Camera
62mm
62mm
33mm
77g
7

Auto Extension Tube 10mm 16mm 10+16mm
Distance Reading of Master Lens lnf.
0.5m
lnf.
0.5m
lnf.
0.5m
Image Magnification Ratio 0.2
0.31
0.32
0.43
0.52
0.63
Field Coverage (cm) 6.5 x 8.7
4.2 x 5.6
4.1 x 5.4
3.0 x 4.0
2.5 x 3.3
2.1 x 2.7
Exposure Factor 1.44
1.72
1.74
2.04
2.31
2.66
8

ShenZhen Commlite Technology Co.,LTD
Email:[email protected]
Web:www.commlite.com