Compaq StorageWorks User manual
Compaq StorageWorks
First Edition: August 2001
Part Number: AA-RNXFA-TE
Compaq Computer Corporation
PCI-to-Fibre Channel Host Bus Adapter for IBM AIX
Installation Guide
Notice
© 2001 Compaq Computer Corporation.
Compaq, the Compaq logo, and StorageWorks Registered in U. S. Patent and Trademark Office.
IBM is a registered trademark of International Business Machines Corporation.
All other product names mentioned herein may be trademarks of their respective companies.
Confidential computer software. Valid license from Compaq required for possession, use or copying.
Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software
Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under
vendor's standard commercial license.
Compaq shall not be liable for technical or editorial errors or omissions contained herein. The
information in this document is provided “as is” without warranty of any kind and is subject to change
without notice. The warranties for Compaq products are set forth in the express limited warranty
statements accompanying such products. Nothing herein should be construed as constituting an
additional warranty.
Compaq service tool software, including associated documentation, is the property of and contains
confidential technology of Compaq Computer Corporation. Service customer is hereby licensed to use
the software only for activities directly relating to the delivery of, and only during the term of, the
applicable services delivered by Compaq or its authorized service provider. Customer may not modify or
reverse engineer, remove, or transfer the software or make the software or any resultant diagnosis or
system management data available to other parties without Compaq’s or its authorized service provider’s
consent. Upon termination of the services, customer will, at Compaq’s or its service provider’s option,
destroy or return the software and associated documentation in its possession.
Printed in the U.S.A.
Compaq StorageWorks PCI-to-Fibre Channel Host Bus Adapter for IBM AIX
Installation Guide
First Edition: August 2001
Part Number: AA-RNXFA-TE
Contents
About This Guide
Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Symbols in Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Symbols on Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Compaq Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Compaq Website . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Compaq Authorized Reseller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Chapter 1
Introduction
Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1
PCI-to-Fibre Channel Host Bus Adapter for IBM AIX Package Contents . . . . . . . . . . . . . 1–3
Key Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4
Chapter 2
Installing the Adapter
Host Bus Adapter Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
Installing the Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2
Upgrading the Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3
Installing the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5
Chapter 3
Maintenance and Troubleshooting
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1
Checklist for Driver and HBA Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–2
Appendix A
Regulatory Compliance Notices
Federal Communications Commission Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–1
Class A Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–1
ClassB Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–2
DeclarationofConformity forProducts Marked withthe FCC Logo—USOnly . . . . A–2
iv Compaq StorageWorks PCI-to- Fibre Channel Host Bus Adapter for IBM AIX Installation Guide
Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–3
Network and Serial Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–3
Canadian Notice (Avis Canadien) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–3
Class A Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–3
Class B Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–3
Japanese Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–4
Taiwanese Notice (July 14, 1998) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–5
Laser Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–5
Laser Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–6
Compliance with CDRH Regulations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–6
Compliance with International Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–6
Appendix B
Electrostatic Discharge
Grounding Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–2
Appendix C
Specifications
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–1
Index
About This Guide
This guide is designed to be used as step-by-step instructions for installation and as a
reference for operation, troubleshooting, and future upgrades.
Text Conventions
This document uses the following conventions to distinguish elements of text:
Keys Keys appear in boldface. A plus sign (+) between two
keys indicates that they should be pressed
simultaneously.
USER INPUT User input appears in a different typeface and in
uppercase.
FILENAMES File names appear in uppercase italics.
Menu Options,
Command Names,
Dialog Box Names
These elements appear in initial capital letters.
COMMANDS,
DIRECTORY NAMES,
and DRIVE NAMES
These elements appear in upper case.
(NOTE: UNIX commands are case sensitive and will
not appear in uppercase.)
Type When you are instructed to type information, type the
information without pressing the Enter key.
Enter When you are instructed to enter information, type the
information and then press the Enter key.
xCompaq StorageWorks PCI-to-Fibre Channel Host Bus Adapter for IBM AIX Installation Guide
Symbols in Text
These symbols may be found in the text of this guide. They have the following meanings:
WARNING: Text set off in this manner indicates that failure to follow directions in the
warning could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could
result in damage to equipment or loss of information.
IMPORTANT: Text set off in this manner presents clarifying information or specific instructions.
NOTE: Text set off in this manner presents commentary, sidelights, or interesting points of
information.
Symbols on Equipment
These icons may be located on equipment in areas where hazardous conditions may exist.
Any surface or area of the equipment marked with these symbols indicates
the presence of electrical shock hazards. Enclosed area contains no
operator serviceable parts.
WARNING: To reduce the risk of injury from electrical shock hazards, do not
open this enclosure.
Any RJ-45 receptacle marked with these symbols indicates a Network
Interface Connection.
WARNING: To reduce the risk of electrical shock, fire, or damage to the
equipment, do not plug telephone or telecommunications connectors into
this receptacle.
About This Guide xi
Any surface or area of the equipment marked with these symbols indicates
the presence of a hot surface or hot component. If this surface is contacted,
the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow the
surface to cool before touching.
Power Supplies or Systems marked with these symbols indicate the
equipment is supplied by multiple sources of power.
WARNING: To reduce the risk of injury from electrical shock,
remove all power cords to completely disconnect power from the
system.
Any product or assembly marked with these symbols indicates that the
component exceeds the recommended weight for one individual to handle
safely.
WARNING: To reduce the risk of personal INJURY or damage to the
equipment, observe local occupational health and safety requirements and
guidelines for manual material handling.
xii Compaq StorageWorks PCI-to-Fibre Channel Host Bus Adapter for IBM AIX Installation Guide
Getting Help
If you have a problem and have exhausted the information in this guide, you can get
further information and other help in the following locations:
Compaq Technical Support
In North America, call the Compaq Technical Phone Support Center at
1-800-OK-COMPAQ. This service is available 24 hours a day, 7 days a week.
NOTE: For continuous quality improvement, calls may be recorded or monitored.
Outside North America, call the nearest Compaq Technical Support Phone Center.
Telephone numbers for world wide Technical Support Centers are listed on the Compaq
website. Access the Compaq website by logging on to the Internet at
http://www.compaq.com.
Be sure to have the following information available before you call Compaq:
■Technical support registration number (if applicable)
■Product serial numbers
■Product model names and numbers
■Applicable error messages
■Add-on boards or hardware
■Third-party hardware or software
■Operating system type and revision level
■Detailed, specific questions
Compaq Website
The Compaq website has the latest information on this product as well as the latest drivers.
You can access the Compaq website by logging on to the Internet at
http://www.compaq.com/storage.
Compaq Authorized Reseller
For the name of your nearest Compaq Authorized Reseller:
About This Guide xiii
■In the United States, call 1-800-345-1518.
■In Canada, call 1-800-263-5868.
■Elsewhere, see the Compaq website for locations and telephone numbers.
Chapter 1
Introduction
Description
The Compaq StorageWorks PCI-to-Fibre Channel Host Bus Adapter (HBA) for IBM AIX
shown in Figure 1-1 provides high-speed Fibre Channel connectivity.
The HBA is compatible with Fibre Channel hubs, storage subsystems, and tape drives.
The HBA supports the SCSI Fibre Channel Protocol, Fibre Channel Switched Fabric
connectivity, and provides point-to-point Fibre Channel arbitrated loop connectivity. The
HBA conforms to PCI Local Bus specification 2.1, and is fully compatible with both
32-bit and 64-bit PCI busses. The HBA accepts industry standard Gigabit Interface
Converter (GBIC) modules.
1–2 Compaq StorageWorks PCI-to-Fibre Channel Host Bus Adapter for IBM AIX Installation Guide
Figure 1–1. HBA Adapter
SHR-2157
Introduction 1–3
PCI-to-Fibre Channel Host Bus Adapter for IBM AIX
Package Contents
The package contents is shown in Figure 1–2.
IMPORTANT: Contact your authorized service representative if any item in the package
contents is missing.
Figure 1–2. Package contents
1Host bus adapter
2Release notes
3CD
1
2
3
SHR-2158
1–4Compaq StorageWorks PCI-to-Fibre Channel Host Bus Adapter for IBM AIX Installation Guide
Key Features
■Removable hot-swappable GigaBit Interface Converter (GBIC)
■Compliance with PCI version 2.1 specification
■High performance 64-bit PCI bus master provides data transfer rates of up to 266 MBs
across the PCI bus
■Supports100 MB/s Fibre Channel data transfer rates
■Three independent DMA channels
■Simultaneous multiple host and target connections
■Supports point-to-point, FC arbitrated loop, FC fabric loop connections, and FC
switched fabric connectivity
■Embedded RISC processor
Chapter 2
Installing the Adapter
This chapter gives instructions for installing the Compaq StorageWorks PCI-to-Fibre
Channel Host Bus Adapter (HBA) for IBM AIX in your system.
Host Bus Adapter Installation
The HBA installation is accomplished by first installing the driver.
NOTE: If you’re installing a RAID subsystem on the HACMP cluster, you will need to install the
HBA and it’s driver into each IBM host server in the cluster.
2–2Compaq StorageWorks PCI-to-Fibre Channel Host Bus Adapter for IBM AIX Installation Guide
Installing the Driver
The driver is contained on the CD-ROM provided in your package contents. The driver
was designed to be installed from writable media and will need to be copied to a
temporary hard disk location.
To install the driver in your host system:
1. Place the CD in your host system’s CD-ROM drive.
NOTE: Be sure you have a mount point, usually a directory in root, such as /mnt, and you know
the device number of the CD-Rom drive, such as /dev/cd0.
2. Mount the CD-ROM and enter the following command:
# mount -v cdrfs -r /dev/cd0 /mnt
3. To change directories to the location of the driver, enter the following command:
# cd /mnt/fcdriver/pci
4. To create a directory to load the driver enter the following command:
# mkdir /tmp/fcdriver
5. To copy the driver image enter the following command:
# cp PC1000.image /tmp/fcdriver
6. To change directories enter the following command:
# cd/ tmp/fcdriver
7. Install the driver by entering the following command:
#installp -acd PC1000.image.all
Other manuals for StorageWorks
3
Table of contents
Other Compaq Adapter manuals
Compaq
Compaq DE520-AA Operation manual
Compaq
Compaq iPAQ Networking HNP-200 Assembly instructions
Compaq
Compaq NC3131 User manual
Compaq
Compaq NC6136 User manual
Compaq
Compaq iPaq HNE-200 Assembly instructions
Compaq
Compaq 295242-B21 - RAID Controller - UW SCSI 40... Quick guide
Compaq
Compaq 166207-B21 - Smart Array 5302/32 RAID... User manual
Compaq
Compaq NC3134 User manual
Compaq
Compaq 154060-002 User manual
Compaq
Compaq NC3132 User manual
Compaq
Compaq KZPEA User manual
Compaq
Compaq 212953-B21 User instructions
Compaq
Compaq NC3123 User manual
Compaq
Compaq Presario R3000 - Notebook PC Installation and operating instructions
Compaq
Compaq StorageWorks FCA2257C User manual
Compaq
Compaq Ultra SCSI Adapter User manual
Compaq
Compaq 284688-B21 - HP StorageWorks SCSI Adaper Storage Controller U160 160... Instruction Manual
Compaq
Compaq Presario R3000 - Notebook PC Mounting instructions
