Compaq Presario 6000 Series User manual

System Unit
Chassis assembly, includes: 282867-xxx
1 Access panel
2Chassis
3 Power supply, 220W, 12V, non-PFC 289768-xxx
* Power supply, 220W, 12V, PFC 289769-xxx
4 Front bezel assembly (see Miscellaneous Parts) 282098-xxx
* Not shown
Mass Storage Devices
1120-GB, UATA, 100/7200 hard drive 248877-xxx
*80-GB, UATA, 100/5400 hard drive 260443-xxx
* 80-GB, UATA, 100/7200 hard drive 240319-xxx
* 60-GB, UATA, 100/5400 hard drive 201527-xxx
* 40-GB, UATA, 100/5400 hard drive 173342-xxx
*40-GB, UATA, 100/7200 hard drive 221424-xxx
* 20-GB, UATA, 100/5400 hard drive 197799-xxx
240/10/40X CD-RW drive, carbon 286303-xxx
*32/10/40X CD-RW drive, carbon 266797-xxx
* 48X CD-ROM drive, carbon 278639-xxx
* 16X DVD-ROM drive, carbon 278647-xxx
*8X/4X/2X/24X/4X R/RW DVD drive 278648-xxx
*12X/10X/2.4X/2.4X/32X/8X R/RW DVD drive 289591-xxx
3Diskette drive, 3.5-inch, buttonless, carbon 278644-xxx
* Not shown
Cables
Miscellaneous cable kit, includes: 259967-xxx
1 Diskette drive cable (238078-005)
2 IDE UATA dual device, hard drive/CD-ROM data cable, 15.5”
(108950-024)
* IDE UATA dual device, hard drive/CD-ROM data cable, 18”
(108950-025)
* Audio cable, 18” (171891-009)
* 1394 “Y” cable (296563-003)
* Cable kit for AIW graphics 280567-xxx
* Not shown
Miscellaneous Parts
1 Front bezel assembly, includes: 282098-xxx
2 Bezel, front insert, 2 USB (263946-001)
3 Bezel, front insert, 2 USB, 2 audio, 1394 (263946-003)
* Heatsink assembly, Type I, includes: # 289579-xxx
4 Fan assembly with mounting base and four screws
5 Heatsink
* Heatsink assembly, Type II, includes: # 300871-xxx
6 Heatsinkandfanassemblywithtworetainingclips
* Heatsink mounting base and attaching screws
* Chassis fan 289577-xxx
* Mouse, 2-button with ratchet wheel 279155-xxx
* Mouse, optical 266654-xxx
* Mouse, wireless 286735-xxx
* Intellimouse, wireless, optical, 5-button, with
ratchet wheel
291387-xxx
* Power Switch/LED cable with switch and LEDs 287077-xxx
* Not shown
# See reverse side for disassembly and more details.
Standard and Optional Boards
1 System board for Intel processor, with thermal
grease
287938-xxx
Memory Modules
2 128 MB RAM, DDR 237121-xxx
* 256 MB RAM, DDR 237122-xxx
* 512 MB RAM, DDR 257526-xxx
* 1 GB RAM, DDR 286403-xxx
Front I/O board kit - USB and 1394, includes: 289580-xxx
3 I/O board (287432-003)
* USB Cable assembly (245151-003)
* I/O and 1394 Cable assembly (163607-003)
Front I/O board kit - USB only, includes: 289581-xxx
* I/O board (287432-001)
* USB Cable assembly (245151-003)
Front I/O board kit - USB, 1394, and audio, includes: 293460-xxx
* I/O board (287432-004)
* USB Cable assembly (245151-003)
* Audio Cable assembly (245152-001)
* 1394 Cable assembly (163607-003)
PCI, 56 kbs Modems
* Patriot II PCI Modem (American continent) 272360-xxx
* Stinger PCI Modem (International use) 243560-xxx
* Condor 2K1 PCI Modem 240381-xxx
Intel Pentium P4 Processors with Thermal Grease
4 2.53 GHz\512K cache, 533 MHz FSB 292849-xxx
* 2.4 GHz\512K cache, 533 MHz FSB 291181-xxx
* 2.26 GHz\512K cache, 533 MHz FSB 290978-xxx
* 2.4 GHz\512K cache, 400 MHz FSB 267926-xxx
* 2.2 GHz\512K cache, 400 MHz FSB 284343-xxx
* 2.0 GHz\512K cache, 400 MHz FSB 284339-xxx
* 1.9 GHz\256K cache, 400 MHz FSB 286514-xxx
* 1.8 GHz\256K cache, 400 MHz FSB 284345-xxx
* 1.7 GHz\256K cache, 400 MHz FSB 284344-xxx
Intel Celeron Processor with Thermal Grease
* 1.7 GHz\128K cache, 400 MHz FSB 293004-xxx
* 1.8 GHz\128K cache, 400 MHz FSB 300664-xxx
Graphics Controllers
* nVIDIA M64, 32 MB memory, no TV (Brazil) 203280-xxx
* nVIDIA P60-A00, NV11, 64 MB memory, LC TV 263480-xxx
* nVIDIA P71, NV17, 64 MB memory, TV 267526-xxx
* nVIDIA P73, NV17, 64 MB memory, TV 290855-xxx
* nVIDIA P83, NV25, 128 MB memory, TV 267527-xxx
* ATI Radeon 7000, 64 MB memory, TV 291586-xxx
* ATI AIW Radeon 7500, 64 MB memory, NTSC 291585-xxx
* ATI AIW Radeon 8500DV, 128 MB memory, TV 261753-xxx
Other Cards
* 1394 PCI card with 3 ports, with PME 287476-xxx
* Sound•Blaster PCI audio card 233889-xxx
* Audigy 6-channel audio card 280562-xxx
* Not shown
Keyboards (not illustrated)
Easy Access PS2 Keyboard 271122-xxx
Easy Access USB Smart Card
Keyboard (U.S. only)
286734-xxx
Easy Access USB Keyboard 281242-xxx
Arabic -171 Portuguese -131
Belgian -181 Spanish -071
Danish -081 Swedish -101
Finnish -351 Swiss -111
French -051 Taiwanese -AB1
Italian -061 Thai -281
International -B31 United Kingdom -031
Latin American Spanish -161 U.S. -002
Norwegian -091 U.S. -004
People’s Republic of China -AA1
Legend for Dash Numbers
To determine the correct dash number for a spare part, follow the rules
below:
1. If the 2nd digit of the serial number is numeric, use -001.
2. If the 2nd digit of the serial number is D, use -002.
3. If the 2nd digit of the serial number is H, use -004.
b
© 2002 Compaq Information Technologies Group, L.P.
Compaq, the Compaq logo, and Presario are trademarks of
Compaq Information Technologies Group, L.P.
Intel, Celeron, and Pentium are trademarks of Intel
Corporation in the United States and other countries.
All other product names mentioned herein may be
trademarks of their respective companies.
Compaq shall not be liable for technical or editorial errors
or omissions contained herein. The information in this
document is provided “as is” without warranty of any kind
and is subject to change without notice. The warranties for
Compaq products are set forth in the express limited
warranty statements accompanying such products. Nothing
herein should be construed as constituting an additional
warranty.
June 2002
Document Part Number 292303-001
Compaq Presario 6000A, 6000T,
6000xx, and 6100xx Series
Desktop
Illustrated Parts Map
Compaq Presario Desktop Family o Personal Computers
Microtower Models, Pentium Processors

Type I Heatsink
Type II Heatsink
System Board Connectors and Jumpers (position of some untitled components may vary in location)
CMOS Clear CMOS P11 Aux audio
CR1 5V Aux (ON)/PSON (OFF) P14 Boot block
CR2 Power button (OK) P16 Intrusion
CR4 3.3V_Aux P20 Primary ATA
E49 Password P21 Secondary ATA
J20 PCI Expansion slot 1 P23 Front Panel Audio header
J21 PCI Expansion slot 2 P24 Front USB
J22 PCI Expansion slot 3 P27 MultiBay
J30 PCI extension P29 SCSI LED
J40 AGP slot P54 COM port B header
P1 Power, main P70 CPU fan
P3 Power, processor (VCCP12V) P124 Hood lock
P5 Power switch/LED P125 Hood sensor
P6 Speaker XBT2 Battery
P7 CD audio XMM1 DIMM 1
P8 Chassis fan XMM2 DIMM2
P10 Diskette XU1 Processor socket
System Hardware Interrupts
IRQ System Function IRQ System Function
0Timer Interrupt 8 Real-Time Clock
1Keyboard 9 Unused
2Interrupt Controller Cascade 10 Unused, available for PCI
3Serial Port (COM B) 11 Unused, available for PCI
4Serial Port (COM A) 12 Mouse
5Unused, available for PCI 13 Coprocessor
6Diskette Drive 14 Primary ATA (IDE) Controller
7Parallel Port (LPT 1) 15 Secondary ATA (IDE) Controller
System Board Diagnostic Lights1
Main Power Switch Status 3.3V_Aux LED 5V_Aux/PSON LED Power Button LED
OFF2ON ON4OFF
ON3ON OFF5ON
1. ON and OFF state of LEDs apply only to a good, working system board with AC power applied to the power supply.
2. Power LED on front of computer is OFF.
3. Power LED on front of computer is ON (Green).
4. 5V_Aux is ONN.
5. PSON is active = power supply turned ON.
Computer LEDs
LED Color LED Activity State/Message
Power Green On (S0) Computer on
Power Green 1 blink every 2 seconds (S1) Normal Suspend Mode
Power Green 1 blink every 2 seconds (S3) Suspend to RAM
Power None Off (S4) Suspend to Disk (if applicable)
Power None Off (S5) Computer off
Power Red 2 blinks 1 second apart, fol-
lowedby2-secondpause-
Repeat
CPU thermal shutdown
Power Red On CPU not installed
Power Red 1 blink every 1 second ROM error
Power Red 1 blink every 2 seconds Power supply crow bar
Hard Drive Green Blinking Hard drive activity
Keyboard LEDs
LED Color LED Activity State/Message
Num Lock Green Flashing (Beeps - 1S, 2L) Memory error
Caps Lock Green Flashing (Beeps - 1L, 2S) No video
Scroll Lock Green Flashing (Beeps - 2L, 1S) System board failure, prior to video
Num, Caps,
Scroll Lock
Green Flash On-Off 2 times (Beeps -
1L, 3S)
Invalid system ROM detected. ROM forces
reflash.
Num, Caps,
Scroll Lock
Green On (Rising Tone) ROM reflashed successfully
Num Lock Green On ROMPaq diskette not present, is bad, or drive
not ready.*
Caps Lock Green On Enter password.
Num, Caps,
Scroll Lock
Green Blink On in sequence, one at a
time - N, C, SL
Keyboard locked in network mode
* Insert valid ROMPaq diskette in drive A. Turn power switch off, then on to reflash ROM. If ROM flash is successful, all
three keyboard LEDs will light up, and you will hear a rising tone series of beeps. Remove diskette and turn power off,
then on to restart the computer. For more information about flashing the ROM, refer to the Troubleshooting guide.
Clearing CMOS*
The computer's configuration (CMOS) may occasionally be corrupted. If it is, it is necessary to clear the CMOS
memory using the CMOS button.
To clear and reset the configuration, perform the following procedure:
1. Prepare the computer for disassembly.
ÄCAUTION: The power cord must be disconnected from the power source before pushing the Clear CMOS
Button (NOTE: All LEDs on the board should be OFF). Failure to do so may damage the system board
2. Remove the access panel.
3. Press the CMOS button located on the system board and keep it depressed for 5 seconds.
4. Replace the access panel.
5. Turn the computer on and run F10 Computer Setup (Setup utility) to reconfigure the system.
*When the CMOS button is pushed or the jumper is removed, both the power-on password and the setup password
become invalid because both are stored in the configuration memory. You will need to reset the passwords.
Disabling or Clearing the Power-On and Setup Passwords*
1. Turn off the computer and any external devices, and disconnect the power cord from the power outlet.
2. Remove the access panel.
3. Locate the header and jumper labeled P49.
4. Remove the jumper from pins 1 and 2. Place the jumper over pin 2 only, in order to avoid losing it.
5. Replace the access panel.
6. Plug in the computer and turn on power. Allow the operating system to start.
NOTE: Placing the jumper on pin 2 clears the current passwords and disables the password features.
7. To re-enable the password features, repeat steps 1-3, then replace the jumper on pins 1 and 2.
8. Repeat steps 5-6, then establish new passwords.
Refer to the F10 Computer Setup (Setup utility) instructions to establish new passwords.
*When the CMOS button is pushed or the jumper is removed, both the power-on password and the setup password
become invalid because both are stored in the configuration memory. You will need to reset the passwords.
Product Configuration Codes*
KN3Z
KPW5 KPWF KPWG KPWH KPWJ KPWQ KPWR KPWX KPXK KPX7 KPX8
KPXF
KW39 KW3A KW3B KW3C KW3D KW3E KW3T KW3X KW33 KW38
KYBA KYBN KYBQ KYBR KYBS KYBT KYBU KYBV KYBW KYBX KYB9
*Serial number decoder:
xxxxAAAAxxxx The center 4 characters are the Configuration Code