Comprehensive CDA-HD100 User manual

HDMI AMPLIFIER SPLITTER 1×2
１
USER MANUAL
CDA-HD100
Table of Contents
1.0 Introduction………………………………………………….….2
2.0 Specifications…………………………………….………..……2
3.0 Package Contents………………………………………….…..3
4.0 Panel Descriptions…………………………………….…….…3
5.0 Connection and Operation..................................................4
Cable a n d Connectivity Compa n y

HDMI AMPLIFIER SPLITTER 1×2
２
HDMI AMPLIFIER SPLITTER
Dear Customer
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or adjusting
this product. Please keep this manual for future reference.
1.0 INTRODUCTION
This HDMI Amplifier Splitter is an HDMI splitter with two outputs. It distributes the
input of the HDMI signal into the two identical outputs simultaneously. This
product has the ability of buffering and amplifying. Each amplifier splitter’s output
can achieve long distance transmission of HDMI signal of more than 15 meters.
When two or more products are cascaded, they can create a larger distribution
and longer in length.
The HDMI Amplifier Splitter offers solutions for HDTV retail and show site, HDTV,
STB, DVD and Projector factory, noise, space and security concerns, data center
control, information distribution, conference room presentation, school and
corporate training environments.
1.1 FEATURES
This HDMI Amplifier Splitter has many features that enable it to perform in a
superior manner. Among those features you will find:
Easy to Use: Install in seconds, no need of setting.
Cascaded: Large distribution achieved by cascading the HDMI Amplifier
Splitter.
Supports highest video resolution 1080p.
Supports 165MHz/1.65Gbps per channel (4.95Gbps all channel) bandwidth.
Supports 8bit per channel (24bit all channel) deep color.
Supports HDCP.
Supports uncompressed audio such as LPCM
Supports compressed audio such as DTS Digital, Dolby Digital（including
DTS-HD and Dolby True HD）
Support 3D all format, including 1080[email protected]8/24Hz,
720p@59.94/60Hz/50Hz, bandwidth up to 165MHz.
2.0 SPECIFICATIONS
Signal Inputs/Output
Input DDC Signal
5 volts p-p (TTL)
Maximum Single Link Range
1920X1080p

HDMI AMPLIFIER SPLITTER 1×2
３
Output Video
HDMI
Operating Frequency
Vertical Frequency Range
50/60Hz
Video Amplifier Bandwidth
1.65Gbps/165MHz
Resolutions(HDTV)
Interlaced(50&60Hz)
480i,576i,1080i
Progressive(50&60Hz)
480p,576p,720p,1080p
Mechanical
Size(L-W-H)
86×44×16mm
Weight(Net)
42g
Warranty
Limited Warranty
1 Year Parts and Labor
Environmental
Operating Temperature
0℃to +70℃
Operating Humidity
10% to 85 % RH (no condensation)
Storage Temperature
-10℃to +80℃
Storage Humidity
5% to 90 % RH (no condensation)
Power Requirement
External Power Supply
5V DC@2A,
Power consumption (Max)
5W
Regulatory Approvals
Converter Unit
FCC,CE,UL
Power Supply
UL,CE,FCC
Accessories Adapter
AC Power Adapter
US standard, UK standard and so on
User Manual
Note: Specifications are subject to change without notice.
3.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the
following items are contained in the shipping carton:
1) Main unit.
2) 5V DC Power Supply.
3) User’s Manual.
4.0 PANEL DESCRIPTIONS

HDMI AMPLIFIER SPLITTER 1×2
４
HDMI Output
DC/5V
HDMI Input
HDMI Output
5.0 CONNECTION AND OPERATION
1) Connect the HDMI input source and output devices into the HDMI Amplifier
Splitter. (HDMI cables are optional)
*please refer to the connection diagram section.
2) Insert the DC side of 5v power supply into it and then connect the AC side of
the power supply into the wall outlet.
3) Turn on the power.
Attention:Insert / Extract cable gently.
5.1 CONNECTION DIAGRAM