Computronic TP4MD User manual

ENGLISH
BLACK&WHITEAND COLOUR MULTIPLEXERS
Installation and usermanual
TP4MD TP10MD TP16MD
TP4CD TP10CD TP16CD

IMPORTANT SAFEGUARDS
TP4MD/CD /TP10MD/CD/ TP16MD/CD 1
ENGLISH
READTHEINSTRUCTIONS
Besuretoread all the safetyand operating instruc-
tionsbeforeusing the device.
KEEP THEINSTRUCTIONS
Besuretokeep all the safetyand operating instruc-
tionsforpossiblefutureneed and queries.
FOLLOWTHEINSTRUCTIONS
Besuretofollowall the safetyand operating instruc-
tions.
WATERAND HUMIDITY
Do notusethe unitnearwater – forexampleneara
bathtub,orinanyarea showing evidencesofhumi-
dity.
POWERSUPPLY
Thisequipmentcan be charged onlybythe type of
supplyquoted byaproduction code on the device. Do
notoverload electricadaptersand extension cordsas
thiscan result infireorelectric shock.
REPAIR
Do notopen coversand repairthisunityourself,refer
all repairstoaqualified person.
UNPACKING
Transferpackage isasafecoverfordevicetranspor-
tation.Werecommend keeping the wrapping forpos-
siblefutureusage.
TABLEOFCONTENTS
INTRODUCTION ...............................................2
MAINCHARACTERISTICS...............................2
OPERATING ELEMENTS
AND FUNCTIONS .............................................2
CAN&RS485, RS232 INTERFACE ................4
EXTERNALKEYBOARD................................4
MULTIPLEXERNETWORKING .....................4
MULTIPLEXERCONTROLLING .......................5
CAMERADISPLAYING - LIVE.......................5
PLAYBACK - PLAY........................................5
DIGITALZOOM - ZOOM................................5
PICTURERECORDING - REC ......................5
ANALOGUECHANNEL CONTROLL. - SEQ ..5
DISPLAYING VCRINPUT - VCR ...................5
SELECT VIEW - VIEW ...................................5
TELEMETRYCONTROLLING .......................5
FREEZEPICTURE - HOLD ...........................6
LOADMACRO - MACRO...............................6
ALARMSTATUS - ALARM ............................6
LISTOFEVENTS ..........................................6
MENU................................................................7
MAINMENU ..................................................7
VIDEORECORDER ......................................7
VCR TYPE ..................................................7
VCR MODE .................................................7
USERDEFINEDVCR ..................................7
AUXINPUT..................................................8
CAMERA........................................................8
RECORDEDCAMERAS ..............................8
DISPLAYEDCAMERAS...............................8
DETECTEDCAMERAS ...............................8
CAMERASINSEQUENCE ..........................8
SEQUENCE.................................................9
TIME MULTIPLIER ......................................9
CAMERATITLES.........................................9
TELEMETRYADDRESSES.........................9
PICTURE PARAMETERS ............................9
ALARM.........................................................10
ALARMINPUTS.........................................10
DWELL TIME.............................................10
RECORDING .............................................10
PLAYBACK................................................10
DISPLAY....................................................11
RELAY CONTACTS...................................11
SPEAKER ................................................. 11
ACTIVITYDETECTOR ................................ 12
SENSITIVITY ............................................ 12
LIGHT–SENSITIVITYMATRIX .................. 12
WALKTEST.............................................. 12
DWELL TIME ............................................ 12
MACRO ....................................................... 13
MACRO1-8............................................... 13
SCHEDULER............................................... 13
EDIT SCHEDULER ................................... 13
ENABLESCHEDULER.............................. 13
EVENTS....................................................... 14
ALARM...................................................... 14
CAMERAFAIL........................................... 14
ACTIVITYDETECTION............................. 14
CAMERAEVENTS.................................... 14
DISPLAYLIST........................................... 14
CLEARLIST.............................................. 14
SYSTEM ...................................................... 14
PASSWORD ............................................. 14
TIME AND DATE....................................... 15
CORRECTION ...................................... 15
FORMAT ............................................... 15
LANGUAGE .............................................. 15
DISPLAY ................................................... 15
START - UP .............................................. 16
TELEMETRY............................................. 16
DOWNLOADFIRMWARE ......................... 16
RELOADFACTORY SETTING.................. 16
INFO ......................................................... 16
BEFORELOOKINGFORHELP ..................... 17
TECHNICAL SPECIFICATION........................ 19

INTRODUCTION MAINCHARACTERISTICS
2 TP4MD/CD / TP10MD/CD / TP16MD/CD
ENGLISH
MultiplexersTParedevices,whichenablerecording
and decoding of up to16 TVsignals(cameras)on the
VCR.Theyalsoofferthe simultaneousdisplaying of
all camerason adivided screen inanumberofdis-
playing formats – views.
The multiplexershavetwodigitalchannels.The main
channelisused forLIVE displayorforplayback of
recorded pictures.The recording channelisused only
forrecording.
The multiplexershaveRS485 and the CANinterface,
whichenablestocontrolthe telemetry receiversused
forcontrolling the PAN/TILTcameraheadsand zoom
lenses.
Foroptimumcamerarecording on VCR itispossible
tousethe activitydetector.The activitydetectorena-
blestoaffectthe camerarecording ordisplaying ca-
meraswithdetected motion.
The multiplexershavenotonlyadigitalchannel,but
alsoan analogue channel,whichcontainsasequen-
tialswitcherwiththe programmableorderand timeof
camerasswitching.The spotchannelisused even for
manualcontrolling fromthe mainpanel.
o 4, 10 or16 video inputs
o mainand spot output
o VCR input and output
o automaticTVstandarddetection fromconnected
cameras
o 864 samplesperaTVline CCIR/PAL(856 -
EIA/NTSC)
o 576 activeTVlinesCCIR/PAL(480 – EIA/NTSC)
o 256 greyscale/ 16 million colours
o RS485 and CANinterfacefortelemetry control-
ling ofpan/tilt unitsand zoomlenses
o possibilityofcontrolling fromexternalkeyboard
o displaying of1,2,3,4,7,8,9,10,13,16 came-
rason divided screen
o digitalzoom
o picturefreeze
o userfriendlyon-screen menu
o on-screen time, date, titlesand status
o programmableswitching sequenceforspot and
main monitor
o built-inactivitydetector
o 4, 10 or16 alarminputs
o potentialless alarmoutput
o wide range ofalarmsettings
o acousticand opticalalarmsignalling
o recording ofalarmevents
OPERATINGELEMENTSAND FUNCTIONS
Fig. 1: Front panelof TP16CD
ZOOM
FOCUS
IRIS
VIEW
MACRO
ALARM
AUTO PRESET9 10 11 12 13 14 15 16
12345678 MENU SEQPLAYHOLDREC
+
16CHANNELMULTIPLEXER
TP16CD
Fig. 2: Back panelof TP16CD
10111213141516 9 8 7 6 5 4 3 2 1
VCR
SPOT
+
ALARM
DC12V
MAIN
IN
OUT

MULTIPLEXERCONTROLLING
3 TP4MD/CD / TP10MS/MD/CD / TP16MS/MD/C
ENGLISH
1. 1-16
Press the buttons1 - 16 todisplaythe correspon-
ding cameraimage.
2. REC
Press the button RECtostartrecording tothe
VCR.
3. HOLD
Press the button HOLD tofreezeall camerason
the divided screen.
4. PLAY
Press the button PLAY tostartthe playback from
the VCR.
5. SEQ
Press the button SEQ tocontrolan analogue chan-
nelMONSPOT.
6. MENU
Press the button MENU todisplaythe on-screen
menu.
7. DIRECTIONARROWS
Thesebuttonsareused formoving inthe menu
and forcontrolling the pan/tiltcameraheadsand
zoomlensesintelemetry.
8. ZOOM+/-
By pressing the buttonsZOOMitispossibleto
controlthe digitalzoom(PLAY mode only) and the
opticalzoomfortelemetry.
9. FOCUS+/-
Focuscontrolling buttonsfortelemetry
10. IRIS+/-
Iriscontrolling buttonsfortelemetry
11. VIEW
Afterpressing the button VIEWitispossibletose-
lectvarioustypesofdisplaying ofthe camera
numberson the screen.
12. MACRO
Press the button MACROtoload the defined mac-
ros.
Fig. 3a: D-SUB37M alarmconnector
18 17 16 15 14 13 12 11 10
7
6
3
20
21
22
232425
26
27
2829
30
31
32
3334
3537
13. ALARM
Press the button ALARMtodisplaythe alarm
status. Press the button againtodisplaythe list of
alarmevents.
14.AUTO
Press the button AUTO tostarts/stop the auto
maticcameraswitching, according tothe pro-
grammed sequence.
15. PRESET
By pressing the button PRESETitispossibleto
setup prepositionsofthe connected devices.This
button hasmoretelemetry functions.
16. IN1 – IN16
Video inputsforcameras1 – 16.
The video inputsareautomaticallyterminated ifthe
corresponding video outputisleftunconnected.Ifa
deviceisconnected tovideo outmakesurethatit
is properlyterminated.
17. VCR IN
Usethisvideo input forconnecting fromVCR.
18. SPOT
Video output tospot monitor.
19. OUT1–OUT16
Video outputsforcameras1 – 16.
20. VCR OUT
Video output toVCR.
21. MAIN
Video output tomainmonitor.
22. MAIN
S-VHS video outputtomainmonitor(onlyforcol-
ourmultiplexers).
23.ALARM
ConnectorserveforRS485,RS232 and CANin-
terfacesand enablesconnecting alarmcontact
makers, sensors, ect.
24. DC12V
Connectorforconnecting powersupply (12VDC,
min 700mA).
Fig. 3b: Alarmoutput internalconnection
Contact 1
20
Contact 2
(1) Alarmoutput – contact 1
(2) Reserve
(3) Common input conductor – ground (GND)
(4) Alarminput 1
(5) Alarminput 3
(6) Alarminput 5(TP10, TP16)
(7) Alarminput 7(TP10, TP16)
(8) Alarminput 9(TP10, TP16)
(9) Alarminput 11 (TP16)
(10) Alarminput 13 (TP16)
(11) Alarminput 15 (TP16)
(12) Common input conductor – ground (GND)
(13) RS232 RX
(14) RS232 TX
(15) CANterminating resistance
(16) CAN_L, connect totwist paircableconductor
(17) Common input conductor – ground (GND)
(18) RS485 A(+)
(19) RS485 terminating touseconnect with(18)
(20) Alarmoutput – contact 2
(21) Common input conductor – ground (GND)
(22) AUXinput fromVCR
(23) Alarminput 2
(24) Alarminput 4
(25) Alarminput 6(TP10, TP16)
(26) Alarminput 8(TP10, TP16)
(27) Alarminput 10 (TP10, TP16)
(28) Alarminput 12 (TP16)
(29) Alarminput 14 (TP16)
(30) Alarminput 16 (TP16)
(31) Common input conductor – ground (GND)
(32) RS232 RTS
(33) RS232 CTS
(34) CAN_GND, connect toshielding ofthe cable
(35) CAN_H. connect totwist paircableconductor
(36) RS485 B(-)
(37) CAV_V+, (5V/100mA) – do not connect

CAN &RS485, RS232 INTERFACE
4 TP4MD/CD / TP10MD/CD / TP16MD/CD
ENGLISH
The externaldevices(PAN/TILTcameraheads,
lenses)areconnected tothe multiplexerusing the RS
485 and the CANinterface.The devicesarecon-
nected withshielded twisted paircable.
Basicconnection oftwodeviceson the CANbusis
shownatfigure 4.(Connection ofthe multiplexerand
the telemetry receiverTCisused asthe example).
Lengthofthe CANbuscan be 1000 matmaximum
and bothendsofthe busmustbe terminated with
120 Wresistor.
Fig. 4: Connection of terminaldevices of the CAN bus
35
34
16
15
TC - telemetryreceiver
Terminalboard K3
CANBus
(Shielded twistpaircable)
Multiplexer
Konektor D-SUB
Figure 5showsthe connection ofotherdeviceson the
CANbus.It ispossibletoconnectup to90 devicesin
thisway.Ifyou need toconnectmoredevices, itis
necessary tousethe CANbushub.
Fig. 5: Connection of next device of the CAN bus
CAN_H
CAN_L
CAN_GND
CAN_GND
16
15
35
34
Ifit isnot possibletoconnect the devicedirectlytothe
bus(fig. 5),you can connectitusing astub (fig. 6).
The lengthof one stub mustbe 60 matmaximum.
The wholelengthof all stubsmustnotexceed 300 m.
Otherconnection possibilitiescan be reached using
the CANbushub.
Fig. 6: Connection using the stub
CAN_H
CAN_L
CAN_GND
CAN_GND
CAN_GND
Stub
Max. 60 m
16
15
35
34
EXTERNAL KEYBOARD
The external keyboardenablesremotecontrolling of
otherexternalequipment(multiplexers,PAN/TILT
cameraheads,lenses)connected tothe CANbus.
You can connectseveralexternalkeyboardstoCAN
busand controldifferentorthe samedevices.During
controlling of one devicebyseveralkeyboardsyou
areabletooperatecontrolled devicebyanotherkey-
boardfivesecondsafterthe lastcommand ofthe pre-
viouskeyboard(it isnot possibletocontrolone device
fromtwokeyboardsat the sametime).
MULTIPLEXERSNETWORKING
Using the externalkeyboardand auxiliary video
switcheryou can simplycontrolseveralmultiplexers
fromone externalkeyboard.Soitispossibletocontrol
agroup ofmultiplexersorcamerasand watchtheir
outputson one monitor.You can useamultiplexer
sequentialswitcherinstead ofavideo switcher.At
fig. 8 you can see the useofthe multiplexerno. 3
analogue sequentialswitcherasan auxiliary video
switcher.Video outputsofmultiplexersno. 1 and 2
lead tovideo inputs1and 2ofthe multiplexerno. 3.
Forexample,when the externalkeyboardstartsto
controlmultiplexerno. 2,italsosendsacommand to
the multiplexerno. 3 todisplayoutputofthe multi-
plexerno. 2 tothe monitor.You can usethe unused
video inputsofthe multiplexerno. 3 forrecording or
displaying on adivided monitorscreen.
Fig. 8: Multiplexersnetworking example
TERMINATOR
CAN BUS VIDEOSIGNAL
LENS, PAN/TILT
TERMINATOR
P/T UNIT
TC
EXTERNAL KEYBOARD
MONITOR
TP4MD
TP16MS
TELEMETRY
RECEIVER
TELEMETRY
RECEIVER
TC
CAMERA
WITH ZOOM LENS
CAMERA
WITH ZOOMLENS
MULTIPLEXER 3
MULTIPLEXER 2
CAMERA
CAMERA
KB 1
TP16CD
MULTIPLEXER 1
Fig. 9: Connection of RS 485 bus
36
18
17
TERM
37
19
B-
A+
B-
A+
GND
Fig. 10: Connection of RS 232 for download
7
23
6
1
MultiplexerD-SUB
PCRS232
14 13
33 32 31
5
9
4
8

MULTIPLEXERCONTROLLING
TP4MD/CD / TP10MD/CD / TP16MD/CD 5
ENGLISH
CAMERASDISPLAYING – LIVE
The cameradisplaying isan implicitmode,whichis
started afterthe devicehasbeen switched on.Came-
rasaredisplayed according tothe last chosen view.
Setup cameratothe firstposition bypressing the
corresponding button 1to16;the following cameras
arearranged automatically. Ifthe camerawasatthe
first position,itwill be displayed at full screen. The TP
multiplexersomitthe displaying ofthe disabled cam-
eras,thatprovidesthe bettercompatibilityofdisplay-
ing without emptyframesamong the cameras.
The firstcamerahasthe privilege ofthe zooming
function (ZOOM - PLAY mode only) and telemetry
controlling.
Pressing the button AUTO itswitches the automatic
switching sequenceon oroff.Set up the sequence
parameters using the menu Sequence, Displayed
cameras and Timemultiplier(see page 8and 9).
PLAYBACK RECORDING - PLAY
The playback ofthe coded recordfromthe VCR is
switched ONbypressing the PLAY button.The cam-
erasaredisplayed onthe screen ofthe mainchannel
according tothe topicalviewinthismode.
Pressing the button 1to16 setup the particularcam-
eratothe firstviewposition;the following camerasare
arranged automatically.The function ofzooming
(ZOOM) isalwaysavailableonlyforthe firstcamera.
By anotherpressing the button PLAY,the multiplexer
switchesintothe LIVE mode.
DIGITAL ZOOM - ZOOM
Digitalpicturezoomcan be switched on onlyinthe
PLAY mode bypressing the button ZOOM+. When
you areusing the zoom function,onlythe centreofthe
wholepictureisdisplayed on the monitorscreen.The
picturecan be moved using the direction arrows.
When the zoomison,the titleZOOMisdisplayed on
the monitorstatusline.The zoomcan be setup only
on the mainchannel.The digitalzoomwill be turned
off bypressing the button ZOOM- orZOOM+.
PICTURERECORDING - REC
The recording ofthe coded imagesisswitched on by
pressing the button RECand itisindicated byred
pointinthe statusline.Recording usesitsowninde-
pendentchannelwithoutaffecting the mainchannel.
Anotherpressing the RECbutton stopsrecording.
ANALOGUECHANNEL CONTROLLING - SEQ
Controlling aspotanalogue channelisswitched on by
pressing the button SEQ. The buttons1to16 are
used fordisplaying acorresponding camera, bypress-
ing the button AUTO itisswitched the automatic
switching sequenceon oroff.Setup sequential
switching parametersusing the menu Sequence,
Camerasin sequence and Timemultiplier(see page 8
and 9).By anotherpressing the button SEQ, the mul-
tiplexerswitchesback intothe controlling ofthe main
channel.
DISPLAYING VCR INPUT - VCR
When playback doesnotwork asexpected,itis
probablycaused by missing orimpropersignalat
VCR INinput.
Press and holdthe PLAY keyforat least 2secondsto
displaysignal from VCR INtothe monitor controlled at
the moment. Ifyou controlLIVE orPLAY mode,the
picture is processed digitally(asrealplayback),when
you control analogue channel,the signalis displayed
asit istothe analogue output.
Releasing the PLAY key returnsthe multiplexertoits
previousmode.
SELECTVIEW – VIEW
The viewon the mainmonitorcan be selected by
pressing the VIEWbutton.Onthe monitorscreen the
following menu will be displayed and than the de-
manded viewcan be chosen bypressing the button 1
to12.Onlythe first6displayed possibilitiesareavail-
ablefor4channelmultiplexersand onlythe first10 for
10 channelmultiplexers.
TELEMETRYCONTROLLING
TPmultiplexersoffer remotecontrolling ofcameras
using the RS485 and the CANinterface.Ifasplit
screen isbeing displayed,you can controlthe first
cameraofthe view(lefttop cornerofthe vieworthe
centreatthe viewno. 11).Onlycameraswithteleme-
try receiveraddress setup can be controlled.This
address issetup inthe menu Telemetry addresses
(see page 9).
PAN/TILTunitand lenscontrolling:
PAN/TILTcameraheadsarecontrolled using the di-
rection buttons.The lensiscontrolled using the but-
tonsZOOM +/-, FOCUS +/-, IRIS +/-. Automaticfocus
oririsisturnon bypressing the buttonsPRESET,
AUTO, FOCUS+orIRIS+, ifcamerasupportthis.
Automaticfunction isturnoff bystartofmanualcon-
troll.
User AUXoutputscontrolling:
Multiplexercan control2user outputs(AUX1and
AUX2)ofthe telemetry receiver.The useroutputs
controlling ispossiblewiththe useofthe buttons
PRESET(the button startsflashing)and one ofthe
buttonsZOOM.Allocation ofthe individualuserout-
putsAUXtothe buttonsisasfollowing:
AUX1 – ZOOM+
AUX2 – ZOOM-
The outputfunction can be setup inthe menu Tele-
metry (see page 16).

MULTIPLEXERCONTROLLING(continued)
6 TP4MD/CD / TP10MD/CD / TP16MD/C
ENGLISH
MultiplexersTPcan setup aso-called preposition (in
advanceprogrammed position ofPAN/TILTcamera
headsand zoomlenses).
Preposition invoking:
Pressing the button PRESET, PLAY and enterthe
numberwithinthe displayed rectangleand confirm.
Although the numbercan be setup to999,the range
dependson the camerapossibilities(pleasesee its
manual).The PAN/TILTcameraheadsand the zoom
lenswill be setup intothe in advancesaved preposi-
tion.
Preposition saving:
Pressing the buttonsPRESET, RECand the number
subsequentlythe preposition can be saved.Afterthat
the topicalposition ofthe PAN/TILTcameraheads
and zoomlensissavedintothe telemetry receiver
memory.
Cameras OSDmenu:
The camerasOSDmenu can be disabled inthe menu
Telemetry (see page 16),soif you areusing the cam-
erasmenu be surethe function isenabled.
Forshowthe camerasmenu press the buttons
PRESET, MENU.Onthe statusline the “PRESET”is
displayed.The arrowbuttons(¬-¯®)areused for
moving inthe menu.Howeverinsomespecialcases
mustbe used anotherbuttonsaccording todisplayed
instructions.Ifnumberentering isrequired,thiscould
be done bylong pressing PLAY button.
Afterleaving the camerasmenu and pressing the
PRESETbutton you returnback tothe pan/tiltand
lenscontrolling mode.Afterthatthe “PRESET”disa-
pearsfromthe statusline.
FREEZEPICTURE(HOLD)
During LIVE and PLAY modespressing the button
HOLD freezesthe mainchannelmonitorview.The
picturestartstomoveagainbyotherpressing ofthis
LOADMACRO (MACRO)
TPmultiplexersenabletodefine so-called macros.
Macroisasetof parameters,whichchange the multi-
plexersettingswhen the macroislaunched.
The following menu isdisplayed afterpressing the
button MACRO.
Aparticularmacroisswitched on bypressing the
button of1to8and itchangesprepared parameters.
The intended parameterscanbe setup inthe menu
Edit macro (see page 13).
DISPLAYALARMSTATUS (ALARM)
By pressing the button ALARMthe following tableis
displayed,whichrepresentsactualstatusofall alarm
inputs.
Incasethe alarmoutput(relay) isactive,you can
switchitoff bypressing the button 1.Ifyou press the
button ALARMagain,the listofrecorded eventsis
displayed.
DISPLAYLISTOF EVENTS
Thereisdisplayed alistof eventsinthismenu,which
correspond tothe parameterssetup inthe menu
EVENTS (page 14).The eventsaredisplayed from
the lastrecorded one.Theyaredisplayed ten on each
page. Pagescan be listed bybuttons -and ¯.
Errormessage notation isasfollowing:
CF - Camerafail (video signallost)
AD - Activitydetection
AL - Alarmevent (alarminputs)

MENU
TP4MD/CD /TP10MD/CD/ TP16MD/CD 7
ENGLISH
By pressing the button MENU the mainmenu isdis-
played on the screen.It isthe starting point forsetting
up all multiplexerfunctions.Tomakethe work easier,
thereisan infoline at the bottomofthe screen.
MAINMENU
MENU CONTROLLING
- The button ¬(BACK)cancelsthe actuallevelofthe
menu on the screen and goesback tothe previous
level.
- The buttons -and ¯enablemoving up and downor
correct the edited level.
- The button ®(CHOOSE,NEXT)choosesasub-
ordinatemenu ormovestothe otherlevel.
- The buttonsof 1to 10 set up anumber.
- The button ZOOM+ deletelast figureinthe number
- The button ZOOM- entersnumber.
- Forfastermoveintothe subordinatemenu itispos-
sibletoenterthe numberofitsline.You can getdi-
rectlyintothe menu,whichyou wanttochange us-
ing severalbuttons.
MENU - VIDEORECORDER
Setup the type and working modesof the VCR inthis
menu.Forthe correctrecording function itisimportant
toensurethatthe VCR and multiplexerwork inthe
samemode.You can alsodefine the type ofthe con-
nection between the VCR and the multiplexerwiththe
helpofAUXinput.
VCR TYPE
Setup yourVCR type here.IfyourVCR type isnot
mentioned here,usean analogoustype orchoosea
userdefined VCR and setup the working VCR modes
inthe menu Userdefined VCR (see page 7).
VCR MODE
Time-lapseVCRscan work inseveralworking modes.
You can setthe topicalworking mode ofthe VCR by
the choiceof the line of 1to10.The working mode of
the VCR can alsobe setup withthe helpofmacroor
AUXinput on the alarmconnector(see page 8).
USERDEFINEDVCR
Time-lapseVCRsdo nothaveonlycommon recording
speed inrealtime(50 or60 fieldspersecond),but
alsoextended modes.Thesemodesextend the re-
cording timefrom3hours(using the E180 cassette)to
12,24,48,72,96,120,168,240,480 or960 hours.
Theserecording timesaredifferent at varioustypesof
VCRs.Thislongerrecording timeisattainableby
omitting somefieldsduring recording.Theparameter
DELAY setsup intervalsbetween recorded fieldsin
thismenu.

MENU – VIDEORECORDER(continued)
8 TP4MD/CD / TP10MD/CD / TP16MD/CD
ENGLISH
AUXINPUT
AUXinputisused fordelivering information fromthe
VCR tothe multiplexer. Set up the required function.
Normallyopen/closed – specifyAUXinputactivity
in an inactivestate
Notused – the AUXinput isnot used
SwitchVCR totheminimalmode –the VCR informs
the multiplexerthat underthe influenceofsomesitua-
tion (forexamplealarmcondition)itrecordsinthe
highestspeed (inthe realtimemode).Multiplexer
must adapt itselftothe VCR speed.
End oftapeindication – the VCR informsthatatape
isatthe end.The multiplexerdisplaysthe noteabout
thissituation forthe operatoron the screen.
VCR recording pulses –itisthe function ofrecording
mode synchronised fromthe VCR.SomeVCRshave
asignalwithrecording pulses(normallymarked as
SW OUTorCLK OUT)leaded on the back panel,
whichdeterminesthe VCR recording speed.This
signalcan be used forthe synchronisation ofre-
cording between the VCR and the multiplexer.Ifthe
operatorswitchesthe recording speed on the VCR or
the recording speed ischanged bythe influenceofthe
alarmsignalon the VCR,the multiplexerchangesits
recording speed automatically.
Startrecord – ifthe AUXinput activityisdetected,
multiplexerstartsthe recording automatically.
MENU - CAMERA
Setup cameraparametersofrecording,displaying,
activitydetection,sequentialswitching and telemetry
inthismenu.
RECORDEDCAMERAS
By marking the lineschoosethe cameras,whichwill
be recorded tothe VCR afterthe recording isswitched
on.Ifyou choosethe line Autodetectcameras, the
multiplexerfindsout, whichcamerasareinoperation
at the moment and markstheminthe table.
DISPLAYEDCAMERAS
By marking the lineschoosethe cameras,whichwill
be displayed during the livemode (LIVE) even inthe
automaticswitching sequence orduring playback
(PLAY).
DETECTEDCAMERAS
By marking the lineschoosethe cameras,whichwill
havethe activitydetection inoperation,see Activity
detection on page 12.
CAMERASINSEQUENCE
By marking the lineschoosethe cameras,whichwill
be availableforthe automaticswitching sequenceon
the spot analogue output (MONSPOT).

MENU - CAMERA (continued)
TP4MD/CD /TP10MD/CD/ TP16MD/CD 9
ENGLISH
SEQUENCE
The menu SEQUENCEprogrammesthe orderand
timeofthe displaying (switching)ofparticularcameras
on analogue switching output (MONSPOT) orinLIVE
mode on mainmonitor. You can programfrom2up to
32 switching stepsofthe sequence.The individual
stepsaremarked withsequentialnumbersand are
arranged one underthe other.Ifyou wanttochoose
the cameraortimeof somestep,you havetochoose
the particularstep withthe helpofdirection keysup
and downatfirst. Then press the button ®
(CHOOSE) and nowyou can change the camera
numberwiththe helpofarrowkeys. By anotherpress-
ing the button (NEXT)you can go toeditthe time.The
timeofthisstep can be setup inthe intervalfrom1up
to255 seconds.The nextpress ofthe button ®fi-
nishesthe editing ofthe chosen step. The lasttwo
stepsofthe menu obtainthe functionsforthe change
ofthe sequencelength:adding anewstep (ADD
NEWSTEP) and deleting the lastsequencestep
(DELETELASTSTEP).By pressing the button ¬
(END)you can stop the editing ofthe sequenceand
returntothe cameramenu.
TIME MULTIPLIER
Ifyou wouldliketochange the cameraswitching time,
itisnotalwaysnecessary toreprogramthe switching
sequence.All the timedataofthe sequencearemul-
tiplied withthe parameterTIME MULTIPLIER. The
timeofthe displaying ofparticularcamerascan be
quitelengthened orshortened and the proportion of
displaying particularsteps(cameras)still lasts.It is
importanttonotethatthe timeofdisplaying one step
afterthe change will still stayinintervalof1to255
seconds.
Thereisan illustrated exampleinthe table,howthe
switching timechangesaccording tothe programmed
switching sequence“Sequencetime”,ifyou usethe
timemultiplier 8× or 1/4×.
CAMERATITLES
Eachcameracan haveitsowntitleforbetteridentifi-
cation.The titlecan include up to16 symbolsand
therecan be used lettersfromAtoZ, numeralsfrom
0 to 9, symbols. , : ! ? ‘ + - * / ( ) < > = and aspace.
TELEMETRYADDRESSES
The address ofthe telemetry receivercan be defined
inthe intervalfrom0up to255 forcontrolling the
PAN/TILTcameraheadsand lensesforeachcamera.
The multiplexer,withthe helpofthisaddress,distin-
guishesparticulardevices, whichareconnected tothe
RS485 orCANbus. Ifacameradoesnothavethe
receiveraddress setup,you can notswitchon the
telemetry forthe camera.
PICTURE PARAMETERS
Colourmultiplexersenablesetting ofpictureparame-
tersforevery camera.Implicitvaluesare:110 for
brightness,64 forcontrast, and 64 forcolour.You are
notallowed tosetcoloursifusing B&Wmultiplex-
ers.Using aB&Wcamerasetcolourto“B&W”. The
cameradisplaying will be sped up.
Camera Timeof
sequence
Multiple
8 ×
Multiple
1/4
2 1s 8s 1s
4 12 s 96 s 3s
8 100 s 255 s 25 s
3 4s 32 s 1s
5 24 s 192 s 6s

MENU – ALARM
10 TP4MD/CD / TP10MD/CD / TP16MD/CD
ENGLISH
The alarmoutputsand inputscharacteristics,the re-
actionstoalarm,the activitydetection orthe video
signallost areset up inthismenu.
ALARMINPUTS
You can setup the activityof the anyalarminputand
itsinfluencetothe alarmoutput (relay).
INPUT TYPE
Notused - signalisignored on thisoutput
Closed - input isnormallyclosed (activeifopen)
Open - input isnormallyopen (activeifclosed)
OUTPUT
Yes - alarminput influencesthe alarm output (relay)
No - alarminputdoesnotinfluencethe alarmoutput
(relay)
DWELL TIME
The lengthofalarmreaction tothe impulseon the
alarminputcan be setup from1up to99 seconds
there.Ifyou setup the function FOLLOWINPUT,
alarmwill be activeduring the timeoflasting the alarm
signalon the alarminput.
RECORDING
The recording toVCR can be modified,if the alarmis
detected.Forsetting up the changesthe following
menu isused:
Alarm inputs - marking the line,the alarminputs will
influencerecording.
Activitydetector - ifyou mark thisline,the activity
detectorwill influencerecording.
Alarmedcameras only - onlythe cameraswiththe
alarmdetection will be recorded during the alarmlas-
ting.The sourceofthe alarmcan be eitherfromthe
alarminputsorfromthe activitydetector.
Selectedalarmedcameras only - onlythe cameras
withthe alarmdetection,whicharealsoselected for
recording,will be recorded during the alarmcondition
(see the menu Recorded cameras on page 13).
Even unselected alarmed cameras - all cameraswill
be recorded during the alarmcondition,eitherthe
oneswiththe alarmdetection orthe oneschosen for
recording.
Cameras interleaving –the cameraswiththe alarm
detection will be interleaved into the normallyre-
corded cameras.
Forexample:Cameras1,2,3,4arechosen forre-
cording and the alarmisdetected on the cameras 6
and 7. The recording sequencewill be asfollowing:
1, 6, 7, 2, 6, 7, 3, 6, 7, 4, 6, 7, 1, 6, 7etc
PLAYBACK
You can choose,whetherthe alarmsignalsand acti-
vitydetection will influencethe displaying during the
playback ornot.

MENU - ALARM (continued)
TP4MD/CD /TP10MD/CD/ TP16MD/CD 11
ENGLISH
DISPLAY
When the alarmisdetected,the camerawiththe last
activated alarmcan be switched intothe full screen
mode orthe alarmcamerason the mainorspot chan-
nelcan cycleaccording tothe prepared period.
RELAYCONTACTS
Controlling an alarmoutputisdisplayed inthe follow-
ing menu.
Normallyopen/closed –thisfunction definesthe
situation ofthe relaywithout alarm.
Follow record –ifthisfunction isselected,the relay
isactiveduring the recording,functionsbelowthan
haveno meaning.
No reaction to alarm –no reaction toalarminputs.
Follow input –activeduring the alarmlasting on any
ofthe inputs.
Switch on XX seconds –activeforthe timefrom1to
99 secondssincethe last alarmactivation.
Noreaction tocamera fail –no reaction tothe video
signallost.
Switch on XX seconds –activeforthe timefrom1to
99 secondssincethe camerasignalfails.
Noreaction toactivitydetector – activitydetector
doesnot influencealarmoutput.
Switch on XX seconds –activeforthe timefrom1to
99 secondssincethe last activitydetection.
SPEAKER
Thismenu controlsthe acousticsignalling ofalarm.
Meaning ofcorresponding linesisthe sameasin
menu Relaycontacts (see page 11).

MENU – ACTIVITYDETECTOR
12 TP4MD/CD / TP10MD/CD / TP16MD/CD
ENGLISH
MultiplexersTPhavethe activitydetector,whichena-
blestodetectthe motion inthe imagesofconnected
camerasand can influencemultiplexeractivities.
SENSITIVITY
The levelof sensitivitycan be setup foreachcamera
inthismenu.It controlshowsensitivelythe cameras
shouldreacttothe image changes.The levelscan be
setup inthe intervalfrom1to10.The lowervalues
(lowersensitivity) aresuitableforoutdoorcameras
withthe wide range oflighting changesand the higher
sensitivityforindoorcameraswithconstant lighting.
LIGHT-SENSITIVITYMATRIX
The area, inwhichthe activitydetectorwill explorethe
image changes,can be defined withthe helpofthis
matrix18 x9oflight-sensitivityelementsforevery
camera.The transparentsquaresrepresentactive
fields.
Therearedescribed controlling buttonsforediting the
light-sensitivitymatrixhere:
1– setsone activematrixfield
2– clearsone field
3– setsthe wholeline
4– clearsthe wholeline
WALKTEST
The walktestisused forchecking the correctsetting
ofthe activitydetectorand continuouslydisplaysthe
detected areastogetherwiththe picture.
DWELL TIME
It isthe timeofmultiplexerreaction afterthe motion
detection.Thistimeisused especiallyforthe reason
of someoverlapping of recording atthe VCR afterthe
momentofdetection.Ifthe dwell timeisforexample
30 seconds,the multiplexerwill react(recordordis-
playthiscamera) even 30 secondsafterthe motion
detection.

MENU – MACRO
TP4MD/CD /TP10MD/CD/ TP16MD/CD 13
ENGLISH
You can edit the macrosinthismenu. Macroisaset
ofparameters, whichchange the multiplexersettings
when the macroislaunched.
MACRO 1TO 8
Every macroenablestochange all orsomeofthe
following multiplexer’scharacteristics.Ifthe line is
marked,the parameterwill be changed tothe defined
value afterthe macroisbeen launched.Ifthisitemis
not marked, the parameterremainsunchanged.
Record – determines,whethertostartorstop the
recording tothe VCR
Time-lapse mode –determines,whetherorwhich
mode ofthe recording tothe VCR will be setup after
the macroislaunched
View – the numberofdisplayed view.
Firstcamera –the numberoffirstdisplayed camera
inthe view
Recorded cameras – bymarking thisline,the setof
recorded cameraswill be changed afterthe macrois
launched
Selectcameras –byopening thissubmenu you can
chooseyourownset ofthe camerasforrecording.
Activitydetector – bymarking thisline,the cameras
foractivitydetection will be changed afterthe macrois
launched
Selectcameras – yourownsetofthe camerasfor
activitydetection
Sensitivityofthedetector –bymarking thisline, the
sensitivitywill be changed afterthe macroislaunched
Editlevels –editsthe sensitivitylevels
MENU - SCHEDULER
The multiplexerschedulerenablesthe automaticstart-
ing ofamacroatthe certaintimeofacertaindayof
the week.
EDITSCHEDULER
You can edit4timememories,bywhichyou wantto
change the multiplexersetting.The macro,being set
up inthe menu,startsevery dayinaweekatthis
time.Forexample,the following menu showsthaton
Fridayat 11:50, the macronumber3islaunched.
ENABLESCHEDULER
Ifyou mark thisline,the scheduler isputinoperation
and launchesthe programmed macros.

MENU – EVENTS
14 TP4MD/CD / TP10MD/CD / TP16MD/CD
ENGLISH
MultiplexersTPenablestoring ofalarmeventsintoits
ownmemory.Using thismenu you areabletochoose
what eventswill be recorded and displayed inthe list.
ALARM
Ifthe itemismarked,thealarmswill be recorded and
displayed inthe list ofevents.
CAMERAFAIL
Ifthe itemismarked, the camerafailswill be recorded
and displayed inthe list ofevents.
ACTIVITYDETECTION
Ifthe itemismarked,the cameraswithactivitydetec-
tion will be recorded and displayed inthe listof
events.
CAMERAEVENTS
The cameras,whichwill be recorded and displayed
intothe list ofevents, arechosen inthismenu.
DISPLAYLIST
You can displaythe listofevents,whichcorresponds
toprevioussetting in thismenu.
CLEARLIST
You can clearthe listofeventsinthismenu bypres-
sing the button 1.
MENU - SYSTEM
Inthismenu you can setup suchparameters,which
correspond tothe functionsofmultiplexersasthe
password,the dataand time setting,interlacecorrec-
tion,telemetry characteristicsand the language
choice.
PASSWORD
The usercan controlthe access intothe menu ofTP
multiplexersbyuserand install passwords.The use
passwordenablesthe entrancetothe userfunctions.
The install password – enablesthe entrancetothe
userand install functions.The install passwordis
used alsoasthe insuranceagainstthe forgetting of
the userpassword.Ifthe usermenu iscancelled or
wasalreadysetup,the menu isavailablewithout
anotherpasswordsetting.Ifthe install passwordin
cancelled, the userhasfree access intoall menus.

MENU – SYSTEM (continued)
TP4MD/CD / TP10MD/CD / TP16MD/CD 15
ENGLISH
Lock menu – using thisfunction,menu islocked.If
the userpasswordwassetup,the systemwill askyou
forsetting up the entrance passwordduring another
try ofaccess.Ifthe install passwordwassetup,this
choicewill lock all install menus.Tounlock themitis
possibleonlywiththe helpofthe function Unlock
locked menus.The item Lock menu isnot availablein
the casethat no passwordhasbeen setup orthe
menu hasbeen alreadylocked.
Unlock lockedmenus – afterchoosing thisitemand
setting the correctinstall password,the install menus
will be unlocked.Thischoiceisblocked,ifthe install
passwordhasbeen disabledorthe menusare
unlocked already.
Changeuser password – enablestosetup anewor
disabled the olduserpassword. Setting an empty
passworddisablesthe password.
Changeinstall password – enablestosetanewor
disablethe oldinstall password. Setting an empty
passworddisables the password.Ifthe menu isnot
available,itisnecessary tounlock the menu inthe
menu Unlock locked menus bytyping the install
password.
TIME AND DATE
Thismenu enablesthe possibilityofchanging the
topicaltimeand dateof the multiplexerand itsformat
of displaying on the monitor.If you choosesometime
and dateitem,timewill stop and will notstartsince
thismenu isfinished.
TIME CORRECTION
You can correctthe multiplexerinternalclock devia-
tionsbysetting the value ofsecondsadded ortaken
off peraday. Forexample: Ifthe clock ofmultiplexers
delays2.5secondsaday,increasethe value ofthe
correction of2.5 s, ifit speedsup decreaseof2.5 s.
FORMAT
Choosethe displaying formatoftimeand dateon the
screen.
LANGUAGE
Choosethe language forcommunication withuser.
DISPLAY
Choosewhethertodisplay cameratitlesand the date
and timeon the statusline inLIVE mode and re-
cording.Then you can set-up the interlacecorrection.
The interlacecorrection influencesthe displaying of
the camerason the monitorand the recording.
Disabled interlacecorrection ofliveimages can cause
the gliding effectofreduced-sizepictures,whichis
caused bythe displaying ofdifferentfieldsofthe same
camera.The samefieldwill be displayed bymarking
thisitem.The picturestabilityincreaseswithresultof
slowerdisplaying.
The interlacecorrection ofrecord alwaysensuresthe
recording ofsamefieldsofthe camera.The playback
qualitywill be higher,butitcan resultthe lowerfre-
quency ofrecorded camerasswitching.Thischoice
will affectonlythe recording tothe VCR inthe minimal
mode (3hours).

MENU – SYSTEM (continued)
16 TP4MD/CD / TP10MD/CD / TP16MD/CD
ENGLISH
START - UP
The devicestartsautomaticallyrecording afterthe
deviceisturned on,ifthe STARTRECORD line is
marked.
Ifthe LOCKRECORD line ismarked,the possibilityof
switching recording off fromthe keyboardisblocked.
TELEMETRY
The telemetry receiverparametersofthe multiplexer
can be set up inthismenu.
Selectprotocol – first line selectsthe communication
protocol.
Own address – every deviceon the telemetry bus
musthaveitsaddress,differentfromotherconnected
devices. The multiplexeraddress can be set up here.
Parameters –setup parametersforselected protocol.
The following menus controlthe function ofuserout-
putsAUX1,AUX2(see Telemetry controlling on
page 8)
Changeoutput –bypressing one ofthe buttons
AUX1/2the stateofuseroutput will be changed.
Follow key –The useroutputisswitched on while
holding the button AUX.
ENABLEEXTERNALKEYBOARD – marking this
line you enablemultiplexertobe controlled fromex-
ternalkeyboard.
DOWNLOADFIRMWARE
Afterchoosing and confirming,the unitwill be waiting
forfirmwaredownloading fromPC.Onthe PCthe
downloading programmust be started.
RELOADFACTORYSETTING
Ifyou press the button 1,all parameterswill be
changed intothe factory setting.
INFO
The systeminformation ofmultiplexerisshownhere.

BEFORELOOKINGFORHELP
TP4MD/CD /TP10MD/CD/ TP16MD/CD 17
ENGLISH
YOUR TROUBLE THECAUSE AND ITSSOLUTION
After switching on thedevice
does notwork.
· The powersupplyisnot connected.
o Check the powersupplyconnectorand the powersupplypolarity.
· The supplyadapterisnot dimensioned sufficiently.
o Check if the adapter poweroutput and voltage correspondstothe multiplexer
requirements(12V, min 700mA).
After connecting thesupply
voltagesome LEDs are on,
butthedevice does notwork.
· The powersupplyadapterisnot dimensioned sufficiently.
o Check if the adapterpoweroutput and voltage correspondstothe multiplexer
requirements(12V, min 700mA).
Horizontal stripes go over the
divided screen.
· The powersupplyadapterisnot dimensioned sufficiently.
o Check if the adapterpoweroutput and voltage correspondstothe multiplexer
requirements(12V, min 700mA).
There isno picture on the
monitor.
· The cabletothe monitorisdefective.
o Check the connecting cable tothe monitorcarefully.
Some cameras are not
displayed and cannotbe
detected with auto detection.
· The camera signalisnot connected properlyorhasbeen debased bystrong
interferencefromthe powerdistribution.
o Check the camerapatchcord. Check the cameraand monitorground con-
ductorand the interferencelevel in the signal.
Thepicture on thesplitscreen
has stopped.
· The picturehasbeen stopped fromthe keyboard(HOLD keyisblinking).
o Press the button HOLD
· The camerasweredisconnected orswitched off.
oCheck the camerapowersupplyand connection.
Some cameras on divided
screen are flashing.
· Video inputsareterminated improperly.
o Check connection on back panel. Every output video signal must be loaded
withone 75 termination at the end of the line bythe connected deviceor
must be left unconnected.
Cameras on divided screen
are slightlyshaking.
· Interlacecorrection isswitched off.
oSet up the interlacecorrection of livepicturein menu SYSTEM - DISPLAY
(page 16). The shaking stopswithresult of slowerdisplaying.
Atcolourmultiplexer
displayed have incorrect
colours.
· Impropersetting ofcameraparameters.
o Check the brightness, contrast and colours setting in menu CAMERA -
PARAMETERS(page 9). Black and whitecamerasmark as“B&W”in colour
column.
Theplayback fromtheVCR
does notwork.
· Missing ordefectivesignalfromVCR.
o Check the signal qualityfromVCR withconnection the VCR output directlyto
the monitor. The signal qualitycan be affected withVCR adjusting (V-Sync,
Tracking).
· Camerasarenot switched fordisplaying.
o Set the camerasin menu DISPLAYEDCAMERAS (page 8).
· Cameras werenot recorded toVCR.
o Check the setting of camerasin menu RECORDEDCAMERAS (page 8).
Check the connection cablestothe VCR. Check the VCR forrecording.
Thesequential outputdoes
notswitch cameras
automatically.
· Automaticsequenceisswitched off manually.
o Switchtosequencecontrolling (SEQ)and switchon the automaticsequence
(AUTO).
· Sequenceorswitching timeisset up incorrectly.
o Check the setting of the sequencein menu SEQUENCE, CAMERAS IN
SEQUENCE, TIME MULTIPLIER(pages8and 9).
Atsimplex multiplexer itisnot
possibleto enter menu.
· The recording isrunning.
o Switchoff the recording using RECbutton and enterthe menu.
Therecording startsbyitself. · Start ofrecording isset up on alarmoractivitydetection.
o Check start of recording in menu ALARM - RECORDING (page 10). Check
alarm inputsand activitydetector.
· Start ofrecording isset up on AUXinput.
o Check the setting of AUXinput in menu VIDEORECORDER - AUXINPUT
(page 8).
· Recording wasstarted withmacrofromthe scheduler.
o Check menu SCHEDULERand MACRO (page 13).

BEFORELOOKINGFORHELP(continued)
18 TP4MD/CD / TP10MD/CD / TP16MD/CD
ENGLISH
YOUR TROUBLE THECAUSE AND ITSSOLUTION
Camera cannotbecontrolled
with theRS485 ortheCAN
bus(rotating and zoomlens
controlling).
· Cameraisnot at the first position inview.
o Press the corresponding cameranumberfirst beforecontrolling.
· Cameradoes not haveset up the telemetry address ofreceiver(multiplexer
doesnot beep when direction arrowsarepressed).
o Set up correct receiveraddress of corresponding camerain menu CAMERA
-TELEMETRYADDRESSES (page 9).
· Camerahasset up incorrect receiveraddress.
o Set up correct receiveraddress of corresponding camerain menu CAMERA
-TELEMETRYADDRESSES (page 9).
· The connection withtelemetry receiverisdefective.
o Check the connection of multiplexerand receiveron bus(page 4).
Multiplexer cannotbe
controlled fromexternal
keyboard.
· Multiplexerisblocked due the controlfromotherkeyboard(5 secondssince
the last command - signalled withlong beep).
o Wait and try tocontrol later.
· Different telemetry address ofcontrolled deviceon externalkeyboardand
multiplexer.
o Check the deviceaddress of multiplexerin menu SYSTEM - TELEMETRY
(page 16)and address of controlled deviceon external keyboard.
· The connection between multiplexerand externalkeyboardisdefective.
o Check the connection of multiplexerand keyboardon CANbus(page 4).
Thedevice does notreactto
alarm inputs.
· The alarmprocessing isswitched off inthe mainmenu.
o Set up the alarm function in menu ALARM(page 10 and 11).
· The connection ofthe alarminputsisdefective.
o Check the connection of the alarm inputs(page 3).
Thedevice reactsto alarm
inputsincorrectly.
· The set up ofalarminputspolarityisincorrect.
o Check the polarityof alarm inputsin menu ALARM - INPUTS(page 10).
Thealarm output(relay)does
notreactproperly.
· The polarityofalarmisset up incorrectly.
o Set up the normal stateof alarm output in menu RELAY CONTACTS
(page 11).
· The reaction torequired condition isswitched off.
oSet up reaction toalarm inputs, activitydetection orcamerafail in menu
RELAY CONTACTS(page 11). Check the reaction of individual alarm inputs
toalarm output in menu ALARM - INPUTS(page 10).
Note: Ifyou want the alarmoutput toswitchtoground (e.g. forVCR control-
ling), connect one ofthe relaycontactstoground.
Thedevice does notreactto
themotion in thecamera
picture.
· The activitydetection forcorresponding cameraisswitched off.
oCheck the menu DETECTEDCAMERAS (page 8).
· The sensitivityorthe light-sensitivitymatrixisnot set up correctly.
o Check the setting in menu SENSITIVITYand LIGHT-SENSITIVITYMATRIX
and try the WALKTEST (page 12).
· The reaction tothe activitydetection isswitched off.
oInmenu ALARMcheck the menu RECORDING, DISPLAY, RELAY
CONTACTSand SPEAKER(pages10 and 11).
Multiplexer internal clock is
delaying orspeeding up.
· The timecorrection isnot set up.
o Find of what timeisthe clock delaying orspeeding up perone dayand ofthis
value increaseordecreasethe timecorrection in menu TIME AND DATE -
CORRECTION(page 15).
All LEDs are flashing. · Firmware fault detected (probablycaused bypreviousincompletefirmware
downloading).
o Download firmware. Connect devicewithPCbyRS232 and start the pro-
gramforfirmwaredownloading on the PC.