Concept2 BikeERG z User manual

Concept2, Inc. 105 Industrial Park Drive Morrisville, Vermont USA 05661 concept2.com/contact
0823
BikeErg weight: 68 lb (31 kg)
Space required for use (training area): 48 in x 60 in (122 cm x 152 cm)
x 16
3/4” (1.9 cm)
PN 2233
x 2
3” (7.62 cm)
PN 1267
Questions? Comments? Problems?
Contact Concept2 directly at 800.245.5676 (US and Canada)
Or visit us online: concept2.com
c2vt.com/bikeergassembly
ASSEMBLY INSTRUCTIONS
PARTS
*not to scale T27 6-Lobe Driver 6 mm L-key
x 1
3/8” (1 cm)
PN 1238
x 1
3” (7.6 cm)
PN 1268
x 1
PN 1271
x 6
1/2” (1.3 cm)
PN 1299
x 1
Slide Rail/Wrench
PN 7104 x 1
x 2
1” (2.5 cm)
PN 2276
x 1
1/2” (1.9 cm)
PN 2293
x 1
PN 7030
IMPORTANT: Do not fully tighten
screws until all screws are in place.
Use the 6-lobe driver with L-key
inserted (as shown) and fully tighten
all fasteners using this configuration.
x 1
3 1/4” (8.3 cm)
PN 1224
x 1
PN 7120

BikeErg Assembly Instructions
2
6(2) 3/4” (1.9 cm)
PN 2233
(2) 3” (7.62 cm)
PN 1267 7
PN 1267
PN 2233
PN 1267
PN 2233
1(4) 3/4” (1.9 cm)
PN 2233 3(6) 3/4” (1.9 cm)
PN 2233
2(4) 3/4” (1.9 cm)
PN 2233
45
GRAY FOAM BLOCK

3
8
11
9
10
12 13
(4)1/2” (1.3 cm)
PN 1299
(1) 3” (7.6 cm)
PN 1268
(1) PN 1271
(2)1/2” (1.3 cm)
PN 1299
(1) 3 1/4” (8.3 cm)
PN 1224
(1) PN 7120 (1) 3/8” (1 cm)
PN 1238
PN 7104
PN 7104

4BikeErg Assembly Instructions
16
How to Use the Device Holder
14 15
(1) 1/2” (1.9 cm)
PN 2293
(1) PN 7030 (2) 1” (2.5 cm)
PN 2276
Insert
device
Loosen knob to slide
rail up or down.
Important: Tighten
knob when device is
in place.
Note: Alternate tightening the
fasteners 3 times each.
Download our FREE
ErgData app for:
• Workouts
• More data displays
• Real time rowing with the
Concept2 community
concept2.com/ergdata