Concept2 FuturePAD FPQ10 User manual

FPQ10 Accessories
Vehicle / Wall -Cradle
Desktop Docking
Bumper
Handstrap
Digital Pen
Bluetooth Card Reader

(Active Wall) / Vehicle cradle (available with and without electronics)
Rated input voltage
DC 9V-36V ± 5%, external DC-DC-converter with cable-set
Rated input current
9V/3A 27W, screwable connector
LED indicator
Power status indication
Data interface
2x USB2.0，1x USB-C (Power)，1x RJ45-LAN，1x RS232
Security
integrated key-lock against vandalism
range of working temperature
-20℃~ +50℃
Operating humidity range
5% to 95% RH Non-condensing state
Storage temperature
-20℃~ +60℃
Storage humidity
＜95%RH
Cooling method
Natural convection
IP Protection
IP30
Reliability
0.8m fall to the concrete floor
Spring pin connector
On resistance＜100mΩ
Anti-static level
Contact Static Test<8KV
Weight
285g
Dimensions
282.8mm*40.5mm*218.5mm
Standard accessories
Packaging material, screws* (on demand), anti-drop clip
set
Optional: VESA Mounting

Desktop Docking
DC in
DC 9V-36V (3A (MAX)
Data interface
2x USB2.0, 1x RS232, 1x RS384, 1xRJ45, 1x DC-input
range of working
temperature
-10℃~ +50℃
storage temperature
-20℃~ +60℃
Working humidity range
5% to 95% RH Non-condensing state
IP protection / Reliability
IP30 / 0.8m falling to the concrete floor
Spring pin connector
On resistance＜100mΩ
Anti-static grade
Contact static test<8KV
Weight
280g
Dimensions
180 mm×120mm×50,5mm
Standard accessories
Universal adapter×1, packaging material
Instructions for use
•Place the whole machine on a single-type charger;
•Using AC power, insert the AC plug of the matching power adapter into a standard socket and make it
contact well;
•The DC end is connected to the base, and the indicator light is red at this time, indicating that the power of
the base is connected;
•The charging status of the Athena Pad Air is subject to the Athena Pad Air charging indicator, that is, the
red light is on to indicate that it is charging, and the green light is on to indicate that the battery is fully
charged.
•Before using this equipment, please carefully read the product instructions and product surface markings;
•During use, keep away from heat and high voltage, avoid children playing with the equipment, and do not
hit the charger;
•Please keep the spring pin connector clean. Do not allow other metal objects to directly touch the spring
pin connector of the charger during use, otherwise it may be dangerous or cause a short circuit and
damage the product;
•Do not drop the device and subject it to impact, or use it in a strong vibration environment to avoid
damage or affect the charging effect;
•This device can only be charged with the matching power adapter;
•Please consult your local dealer or our company's customer service center in case of failure.

Bumper
Additional protection for the tablet with the bumper. All connections, cameras and scanners can still be used.
Handstrap
Digital Pen
Safe one-hand operation.
The hand strap is screwed onto the tablet with four
screws.
Digitizer active pen (rechargeable via micro-USB)
Bluetooth Card Reader
ISO/IEC 7816-1,2,3,4; ISO 14443 Type A and Type B;
BLE for mobile devices; Micro USB for connecting PC and recharging