Condor MDR 53 User manual

Page 1 of 2
Montageanweisung
Operating Instructions
Instrucciones de Montaje
Instructions de Montage
Instruzioni d’impiego
MDR 53
Steuerdruckschalter / Control pressure switch
The relevant standards for running and installing electrical appliances are to be observed.
Installation and connection by skilled personnel only, after installing accessories function
of device to be checked by skilled personnel only.
EN/IEC 60947 - 5 - 1 (AC-15)
Ie Ithe
NH00/gL
Ue
(50/60 Hz)
4 A 10 A 10 A 250 V~
CAUTION: Pressure setting is only possible when applying
pressure to the switch
Cut-out pressure po Differential Δp
Δp = po – pu
Press wheel downwards
If the spindle moves when turning, lowest
possible Δphas been reached. In order to
loosen, turn wheel to the left holding the
spindle tight.
polower:
turn wheel
to the left
pohigher:
turn wheel
to the right Δplower:
turn wheel
to the right
Δphigher:
turn wheel
to the left
Spindle
P
IP 54
UN

Page 2 of 2
Pressure Diagrams MDR 53
02.11.2005
Condor Pressure Control GmbH
Warendorfer Straße 47 – 51
D-59320 Ennigerloh Telefon: [phone] / 89 – 0 Telefax: +49 (0) 25 87 / 89 - 140 [email protected] www.condor-cpc.com