Contec PCE68-9PS User manual

Connection Conversion Cable for RS-232C
(68Pin→9Pin×8)
PCE68-9PS User’s Guide
CONTEC CO.,LTD.
This product converts the CN1 (68-pin 0.8mm pitch connector) on the board of RS-232C 8CH to 9-pin
D-SUB male connectors for eight channels as shown below.
Suitable boards : COM-8C-LPE, COM-8C-LPCI
External Dimensions
13.0mm
44.0mm
34
1
35
68
15.0mm
33.5mm
5 9
16
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
1000 mm
Specifications
Item Specification
Connector 68-pin 0.8mm pitch connector Thumb screw: M2
9-pin D-SUB male connector Screw nut: UNC#4-40 (Inch screw) x 8
Cable
9 core shield cable Conductor size: AWG30 Conductor composition: 7pcs/0.1mm UL1571
Weight 380g
CAUTION
- Do not strike or bend the product. Otherwise, the product may malfunction, overheat, causea
failure or breakage.
- Do not insert or remove the connector while the power is turned on to the PC. Failure to observe
this precaution may cause malfunction, overheating.
- The specifications of this product are subject to change without notice for quality improvement.
Even when using the product continuously, be sure to read the manual and understand the contents.
- Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may
appear in this document or for any results of using the product.
- All relevant issues have been considered in the preparation of this document. Should you notice an
omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.
1PCE68-9PS

PCE68-9PS User’s Guide
Connection Diagram
Pin
No.
Pin No.on the
9-pin
D-SUB
connectors
Pin
No.
Pin No.on the
9-pin
D-SUB
connectors
Pin
No.
Pin No.on the
9-pin
D-SUB
connectors
Pin
No.
Pin No.on the
9-pin
D-SUB
connectors
1
CH7-2
18
CH3-2
35
CH8-2
52
CH4-2
2
CH7-8
19
CH3-8
36
CH8-8
53
CH4-8
3
CH7-9
20
CH3-9
37
CH8-9
54
CH4-9
4
CH7-7
21
CH3-7
38
CH8-7
55
CH4-7
5
CH7-1
22
CH3-1
39
CH8-1
56
CH4-1
6
CH7-4
23
CH3-4
40
CH8-4
57
CH4-4
7
CH7-6
24
CH3-6
41
CH8-6
58
CH4-6
8
CH7-3
25
CH3-3
42
CH8-3
59
CH4-3
9
CH5/7-5
26
CH1/3-5
43
CH6/8-5
60
CH2/4-5
10
CH5-3
27
CH1-3
44
CH6-3
61
CH2-3
11
CH5-6
28
CH1-6
45
CH6-6
62
CH2-6
12
CH5-4
29
CH1-4
46
CH6-4
63
CH2-4
13
CH5-1
30
CH1-1
47
CH6-1
64
CH2-1
14
CH5-7
31
CH1-7
48
CH6-7
65
CH2-7
15
CH5-9
32
CH1-9
49
CH6-9
66
CH2-9
16
CH5-8
33
CH1-8
50
CH6-8
67
CH2-8
17
CH5-2
34
CH1-2
51
CH6-2
68
CH2-2
SG
DTR 1
TxD 1
RxD 1
DCD 1
9
8
7
6
RI 1
CTS 1
RTS 1
DSR 1
5
4
3
2
1
CH1
CH1
CH6
CH7
CH8
SG
DTR 8
TxD 8
RxD 8
DCD 8
9
8
7
6
RI 8
CTS 8
RTS 8
DSR 8
5
4
3
2
1
CH5
CH4
CH3
CH2
CH8
- Cable
9-conductor shielded cable
Cable length : 1000mm
Conductor size : AWG#30
- Connector used
68-pin 0.8mm pitch connector
Lock screw : M2
- Connector used
9-pin D-SUB, male connector
Thumb screw : UNC#4-40(inch screw)
- Applicable connectors
17JE-13090-02(D8C) (mfd. by DDK, Female)
68
35
34
1
Copyright 2014 CONTEC CO., LTD. ALL RIGHTS RESERVED.
CONTEC CO., LTD.November 2014 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
Japanese http://www.contec.co.jp/
English http://www.contec.com/ LYRW361 (NA03665)
Chinese http://www.contec.com.cn/ [11182014]
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.