Control Data 3170 System manual

CONTROL DATA ®
3100/3150/3170
3200/3300/3500
COMPUTER SYSTEMS
MSOS VERSION 5
INSTALLATION HANDBOOK
CONTROL DATA
CORPORATION

CONTROL DATA®
3100/3150/3170
3200/3300/3500
COMPUTER SYSTEMS
MSOS VERSION 5
INSTALLATION HANDBOOK
CONTROL DATA
CORPORATION

REVISION
2-1-74
B
4-15-74
C
5-15-74
D
1-15-75
Publication No.
60410800
© 1974. 1975
REVISION RECORD
DESCRIPTION
Original printing.
Manual revised.
Errors and omissions are corrected from the first printing.
-
Manual revised to reflect moving of ANSI FORTRAN and COBOL from separate tapes to system
tape (package A).
Manual revised to reflect version 5.1.
Address comments concerning this
manual to:
Control Data Corporation
Technical Publications
4201 North Lexington Avenue
St. Paul. Minnesota 55112
by Control Data Corporation
or use Comment Sheet in the back of
this manual.
Printed in the United States of America

PREFACE
This handbook is intended for use by personnel responsible for installing a CONTROL
DATA@" Mass Storage Operating System (MSOS) version 5 or for updating MSOS 4.2 I
to MSOS 5. The handbook is divided into three parts. All references to sections
contained in the same part as the section making the references show only the section
number. References to sections in other parts include the part number.
The user should be familiar with and have available for reference the latest editions of
the following manuals.
3100/3150/3170/3200/3300/3500 MSOS version 5 Reference Manual
3100/3150/3170/3200/3300/3500 MSOS version 5 Operator's Guide
3100/3150/3170/3200/3300/3500 MSOS version 5 Diagnostic Handbook
3100/3200/3300/3500 COMPASS Reference Manual
In addition to the previous manuals, the hardware reference manuals for the system
hardware and the reference manuals for each product to be installed with MSOS are
needed by the user.
Control Data Corporation intends that the user of the MSOS 5 use only those features, I
functions, and parameter values which are described in this handbook and in the manuals
previously listed. The use of undefined parameter values, features, or functions not
described in these manuals, even though coding for them may exist in the system, is at
the user's risk.
The following are publications relating to MSOS 5 and its product set members. The I
latest revision levels of these publications may be obtained from the latest edition of
the Literature and Distribution Services catalog.
Control Data Publications
3100/3150/3170/3200/3300/3500 MSOS version 5 Reference Manual
3100/3150/3170/1200/3300/3500 MSOS version 5 Operator's Guide
3100/3150/3170/3200/3300/3500 MSOS version 5 Diagnostic Handbook
3100/3150/3170/3200/3300/3500 COMPASS Reference Manual
3100/3150/3170/3200/3300/3500 FORTRAN Reference l\!Ianual
3100/3150/3170/3200/3300/3500 COSY/MSOS Reference Manual
3100/3150/3170/3200/3300/3500 COBOL/MSOS Reference Manual
3100/3150/3170/3200/3300/3500 MSOS Sort Merge Reference lVlanual
3100/3150/3170/3200/3300/3500 ALGOL Reference lVlanual
3100/3150/3170/3200/3300/3500 ADAPT Reference Manual
3100/3150/3170/3200/3300/3500 PERT COST Reference Manual
3100/3150/3170/3200/3300/3500 PERT TIME Reference Manual
3100/3150/3170/3200/3300/3500 SAINT Reference 2.'.1anual
60410800 D
Publication No.
60410600
60410700
60410900
60236800
60057600
60207300
60191100
60281500
60371800
60173400
60132500
60131100
60213700
iii

Control Data Publications
3100/3150/3170/3200/3300/3500 LISA Reference Manual
3100/3150/3170/3200/3300/3500 ANSI COBOL MSOS Reference l\lanual
3100/3150/3170/3200/3300/3500 ANSI FORTRAN MASTER/MSOS
Reference Manual
iv
Publication No.
60236900
60417900
60281400
60410800 A

SECTION 1
SECTION 1
6041080C D
CONTENTS
PART I RELEASE SUMMARY
SYSTEM SUMMARY
1.1
Product Set Members
1.2
Release Materials
1. 2. 1
Package A
1. 2.2
Package B
1. 2. 3
Package C
1. 2.4
Package D
1. 2.5
Package E
1. 2. 6
Package F
1. 2.7
Package G
1.3
Release Material Description
1. 3. 1
Package A MSOS 5. 1
1. 3.2
Package B ANSI COBOL
1. 3. 3
Package C ANSI FORTRAN
1. 3.4
Package D PERT TIME 32K
1. 3.5
Package E PERT COST
1. 3. 6
Package F ADAPT
1. 3. 7 Package G INITUSER
1.4 New Features and Differences
1. 4. 1
MSOS 5. 1 New Features
1. 4.2
MSOS 5.0 Differences
1. 4. 3 MSOS 5. 1 Differences
1. 4. 4 MSOS Operating Differences
1. 4.5
ANSI FORTRAN Differences
1.5
System Entry Points (SEPOINT)
1. 5. 1 Unchanged SEPOINT Names
1. 5. 2 Deleted SEPOINTS with Equivalents
1. 5. 3 Deleted SEPOINTS
1. 5.4 SEPOINTS Deleted in MSOS 5. 1
1.6
Limitations
1. 6. 1
MSOS
1. 6. 2 COMPASS
1. 6. 3 FORTRAN
1. 6.4
ANSI COBOL
1. 6.5 MSOS Utili ty
1. 6.6 ANSI FORTRAN
1. 6. 7 ALGOL
PART II INSTALLATION PROCEDURES
INSTALLA TION PROCEDURES
1. 1 System Definition and Configuration
1. 2 Updating MSOS 4.2 to MSOS 5. 1
1. 2. 1 Modifying the Autoload Routine
1. 3 Installing MSOS 5. 1 in a New System
1. 4 Updating MSOS 5.0 to MSOS 5. 1
1-1-1
1-1-1
1-1-2
1-1-2
1-1-2
1-1-2
1-1-2
1-1-2
1-1-3
1-1-3
1-1-3
1-1-3
1-1-6
1-1-7
1-1-8
1-1-8
1-1-8
1-1-8
1-1-9
1-1-9
1-1-10
1-1-12
1-1-12
1-1-13
1-1-13
1-1-13
1-1-14
1-1-14
1-1-15
1-1-15
1-1-15
1-1-15
1-1-15
1-1-16
1-1-16
1-1-16
1-1-16
U-l-l
II-l-l
II-l-1
II-I-2
II -1-4
II-I-5
I
I
I
v I

SECTION 2 MSOS OPTION SELECTION II-2-1
2. 1 MSOS Installation Options
II-2-1
2. 1. 1
Standard II-2-1
2.1.2
Memory Protect II-2-1
2. 1. 3
Extended Core II-2-1
2. 2
Installation Dependent Routines II-2-1
2. 2. 1 MSOS COSY Tape Contents
II-2-4
2. 2. 2 Assembly Option Coding Sheets
II-2-10
2. 3 Assembly Option Definition II-2-19
2. 3. 1
RDT Entry Option for ALGOL (ALG)
II-2-19
2. 3. 2 ASCII Hardware Option (ASCII)
II-2-19
2. 3. 2A System Hardware Definition (AUT) II-2-20
2. 3. 3
BDP Hardware Option (BDP) II-2-20.1
2. 3.4
BDP 3312 Option (BDP3312) II-2-20.1
2. 3.5 BDP Collating Sequence
II-2-21
2. 3.6
Ba tch Job Submission Option (BJSOPT)
II-2-22
2. 3. 7
Punched Card Limit (CA RDS)
II-2-22
2.3.7A
Card Punch Error Recovery Option
(CARDPNCH) II-2-23
2. 3. 8 RDT Entry Option for MS COBOL (CBL)
II-2-23
2. 3. 9 Carriage Control Option (CC)
II-2-23.1
I
2.3.9A
Class-R Files Option (CLASSR)
II-2-23.1
2.3.10
Clock Quantum Option (CLKTIME) II-2-23.1
2.3.11 RDT Entry Option for COMPASS (CMP)
II-2-24
2.3.12 Card Punch Retry Option (CP. RETRY)
U-2-24
2.3.13
813/814 Disk File Option (DT813)
II-2-25
2. 3. 14
Multiple Disk Drive Option (DT 841) II-2-25
2. 3. 15
Extended Memory Protect Option (EMP) II -2-25
2.3.16
FloatingPoint Hardware Option (FDP) II-2-26
2. 3. 17 File Description Table Length Option
(FG F DTL / PnFDTL) II-2-27
I
2. 3. 18
Message Response Option (FINIS)
II-2-27
2.3. 19 RDT Entry Option for MS FOR TRAN (FTN)
II-2-28
2. 3. 20 Interim Library Option (IL.INIT)
II-2-28
2. 3. 21
841 Interlace Option (INTERLACE) II-2-29
2.3.22 Sampling Time Interval (JOBTI)
II-2-29
2.3.23 Job Time Limit Option (JOBTL)
II-2-29
2. 3. 24 Loader Equipment Declaration Card Option
(LED)
II-2-30
2. 3. 25 Card or Line Limit Option (LIMITS)
II-2 -30
2. 3. 26
Line Count Option (LINECNT)
II-2-31
2.3.27 Line Limit Option (LINES)
II-2-31
2. 3. 28 Memory Limit Option (MACHSIZE)
II-2-31
2.3.29
SORT and MS SORT Memory Protection
Option (MEMPTKT)
II-2-32
2.3.29A
Maximum File Size Option (MFS) II-2-32
2. 3. 30 Manual Interrupt Buffer Length Option
(MIBUFLNG)
II-2-32
I
2. 3. 31
MMTC Option (MMTC)
II-2-33
2.3.31A Mode Bit Option (MODEBIT)
II-2-33
2. 3. 32
Memory Protect Option (MP)
II-2-33
2. 3. 33 Mass Storage Channel Access Option (MS)
II-2-34
I
2.3.33A Mass Storage Table Definition (MST)
II-2-34
2.3.34 3234 Controller Option (MS3234)
II-2-35
2. 3. 35
3553 Controller Option (MS3553)
II-2-35
I
vi 60410800 D

2.3.36 Mass Storage Bias Option (MSBIAS) II-2-35
2. 3. 36A System Privacy Codes (MSEC) II-2-35.1
2. 3.37 PLIBEDIT Version Option (lVISOS.4) II-2-35. 1
2.3.38 Mass Storage Retry Option (MS. RETRY) II-2-~6
2.3. 38A Controlled Backspace Hardware Option
(MT. CBKSP) II-2-36
2.3. 38B Programmable Read Clipping-Level
Hardware Option (MT. PCL) II-2-36.1
2.3.39 Magnetic Tape Backspace/Reread Option
(MTB. RTRY) II-2-36.1
2.3.40 Magnetic Tape Erase Retry Option
(MTE. RTRY) II-2-36. 1
2.3.41 Magnetic Tape Noise Recovery Option
(MTN. RTRY) II-2-37
2.3.42 Magnetic Tape Cleaner Motion Option
(MTS. RTRY) II-2-37
2.3.43 Negative Zero Option (MZEROSUP) II-2-37
2.3.44 Number of Channels Option (NOCH) II-2-38
2.3.45 Mass Storage Table Size Option (NRATL) II-2-38
2.3.46 APC Card Punch Availability Option (NRCP) II-2-39
2. 3.47 APC Printer Availability Option (NRPR) II-2-39
2.3.48 Noise Record Length Option (NSTDNL) II-2-40
2.3.49 OCC and SNAP Card Option (OCCSNAP) II-2-40
2.3.50 Operator Control Option (OPCTL) II-2-40
2. 3. 51 Error Recovery Overlay Length Option
(OVLENGTH) II-2-41
2.3.52 Priority Level Options (P1, P2, P3, P4) II-2-41
2.3.53 Panic Dump Option (PANIC) II-2-42
2.3.54 Programmable Clipping Level Option (PCL) II-2-42
2.3.55 Programmable Memory Protect Option (PMP) II-2-42
2.3.56 501/505/3254 Line Printer Option (PR501) II-2-43
2. 3.57 512 Printer Option (PR512) II-2-43
2. 3. 57A 580 Printer Option (PR580) II-2-44 I
2. 3.58 Printer Retry Option (PR. RETRY) II -2-44
2.3.59 Mass Storage Table Size Option (RA TL) II-2-44.1
2. 3. 59A Real-Time Option (REALTIME) II-2-44.1
2. 3.60 RDT Entry Option for Error Recovery (REC) II-2-45
2. 3.61 Reject Limit Option (REJLIM) II-2-45
2.3.62 Reject Message Option (REJMESS) II-2-45
2. 3.63 Restartability Option (REST) II-2-46
2. 3.64 Stacked Jobs/ Files Option (SCHxx) II-2-46
2. 3.65 Number of Segments Option (SEGCNT) II-2-47
2. 3.66 Stacked Interrupts Option (STACKENT) II-2-47
2. 3.67 Printer Character Set Option (SUBSET) II-2-48
2. 3.68 Memory Size Option (SXTK) II-2-48
2. 3.69 System Identification Option (SYSID) II-2-48
2.3.70 System Input AUT Ordinal (SYSINP) II-2-49
2. 3. 71 System Library AUT Ordinal (SYSLIB) II -2-49
2. 3. 72 System Output AUT Ordinal (SYSOUT) II-2-49
2. 3. 73 System Punch AUT Ordinal (SYSPUN) II-2-50
2.3.74 System Typewriter AUT Ordinal (SYSTYPE) II-2-50
2. 3.75 Tape Transport Availability Options (T6xx) II-2-50
2. 3. 76 Time Limit Test Option (TIMELMT) U-2-51
2. 3. 76A Logical MSIO Overlay Size (TPOVSIZE) U-2-51 I
2. 3. 77 Printer Train Type Option (TRN595x) U-2-51
2. 3.78 RDT Entry Option for ANSI COBOL (UCBL) II-2-52
2.3.79 ANSI COBOL Binary Deck Option (UCBLV42) U-2-52
2. 3.80 RDT Entry Option for ANSI FORTRAN
(UFTN) II-2-53
2.3.81 Operator Intervention Option (UNRE) U-2-53
2. 3.82 Zero Suppression Option (ZROSUPOC) II-2-54
2.4 Assembly Option Default Values II-2-54
60410800 D vii

SECTION 3
SECTION 4
SECTION 5
viii
INTERIM LIBRARY INSTALLATION, HARDWARE
INITIALIZATION, AND DECK PREPARATION
3. 1 Interim Library Installation and Hardware
Initialization
3.2 Deck Preparation
3.2. 1 Example of COSY and COMPASS Jobs
MSOS BINARY SOURCE MODIFICATION AND FINAL
LIBRARY GENERATION
4. 1 Binary Source File Listing
4.2 PLIBEDIT Run
4.3 PRELIB Run
INCORPORATING PRODUCT SET MEMBERS
II-3-1
II-3-1
II-3-6
II-3-7
II-4-1
II-4-1
II-4-1
II -4-4
II - 5-1
5.1 SAINT II-5-1
5.1.1 Assembly Options II-5-2
5.1.2 Core Requirements II-5-3
5.2 ADAPT II-5-4
5.2.1 Install ADAPT Using COSY Tape II-5-4
5.2.2 Install ADAPT Using the Binary Release File II-5-13
5.3 PERT TIME II-5-13
5.3.1 Establish Memory and Mass Storage
Requirements II- 5-14
5.3.2 Allocate PERT TIME Files II-5-I4
5. 3. 3 Create Overlay File II - 5-15
5.3.4 Execution Run II-5-17
5.4 PERT COST II-5-I8
5.4. 1 Establish Memory and Mass Storage
Requirements II-5-19
5.4.2 Allocate Scratch Files II-5-2I
5.4.3 Create Overlay File and Run with
PERT COST Master Files on Tape II-5-2I
5.4.4 Allocation of Files with PERT COST
Master Files on Mass Storage II-5-23
5.4.5 Create Overlay File and Run with PERT
COST Master Files on Mass Storage II-5-24
5.5 ANSI FORTRAN II-5-27
5.5.1 ANSI FORTRAN System Preparation II-5-27
5. 5. 2 COSY File Contents
5. 6 ANSI COBOL
5. 6. 1 ANSI COBOL System Preparation
5.6.2 ANSI COBOL Option Selection
5.6.3 UDCT
5.6.4 UCIE
5.6.5 UCDD
5.6.6 UCRI
5.6.7 UCPI
5.6.8 UCG1
5.6.9 UCBLSORT
II-5-28
II-5-31
II-5-31
II-5-32
II-5-33
II-5- 34
II-5-34
II-5-34
II-5-35
II-5-35
II-5-36
60410800 D

5.6.10 UFIGCON
11-5-36
5.6.11 UVARAN
11-5-37
5. 6. 12
Assembly Option Coding Sheets
11-5-37
5.6.13
ANSI COBOL COSY File Contents
11-5-37
5.7
Extended Core Systems
11-5-37
SECTION 6
VERIFICATION DECK OUTPUT
11-6-1
SECTION
7
SYSTEM SCRATCH FILES
11-7 -1
7.1
Allocation of Files 54, 55, and 56
11-7-1
7.2
Utilization of System Scratch Files
11-7-3
SECTION
8
COMPASS OVERLAY PREPARATION
11-8-1
SECTION
9 MS FORTRAN
PREPARATION
11-9-1
SECTION
10 FCO
LEVELS
11-10-1
SECTION
11
BAD TRACK FILE ALLOCATION
11-11-1
11. 1 Bad Track File Initializa tion
U-ll-l
I
60410800 D
ix