convenience concepts 151202E User manual

ASSEMBLY INSTRUCTIONS
We have designed our furniture with you , the customer in mind . Our clear , easy to follow ,
step by step instructions will guide you through the project from start to finish .
Feel confident that this will be a fun and rewarding project . The final product will be a quality
piece of furniture that will go together smoothly and give years of enjoyment .
Please do not return to the store
Broken or missing parts?
Need help with assembly?
If you have any questions just call 1-800-468-6447 or email us at
[email protected]
STOP
TV STAND WITH THREE CABINETS
50” MAXIMUM FLAT PANEL TELEVISION
80 LB. MAXIMUM CAPACITY
151202E 151202
151202 LO
151202 W
151202 CH
151202 GY

Hardware List
Cam Bolt (16pcs)
Wood dowel (16pcs)
Knob (3pcs)
Spring insert (4pcs)
Magnet (2pcs)
racket (2pcs)
Knob screw (3pcs)
Nails (15pcs)
Metal pin (8pcs)
Glue (1pc) Back panel (1pc)
End cap (10pcs)Metal tube (5pcs)
Middle panel (1pc)
Rig
L
ht divider (1pc)
Top panel (1pc)
Side panel (2pcs)
A
B
C
D
E
F
H
G
I
J
Panel List
PAGE 2 OF 6
Gently screw cam
bolt into the
threaded anchor.
Screw the camlock
firmly into locked
Lightly glue one end of
the wood dowel and tap
halfway into hole.
Lightly glue wood dowel and
connect to second panel by
Arrow must face hole
Assembling the unit with camlocks and wood dowels.
B

Step 1
Step 2
Step 3
1. Connect Le Divider Panel
and Right Divider Panel to
Boom Panel by ghtening
camlocks already in panels.
1.Connect side panels to Boom Panel
by ghtening camlocks already in panels.
*Refer to page 2 for dowel assembly .*
*Note: Slots must face inside when installing middle dividers .*
PAGE 3 OF 6
5
5
J

Step 4
Step 5
Step 6
1.Connect middle Panel to assembly by ghtening camlocks.
2.Insert the Metal Pins (I) into pre-drilled slots on Door
4.Insert Pins (I) into holes in Divider panels and .
3.Slide pins in Door into slots in Divider Panelsand .
*Refer to page 2 for dowel assembly .*
J
5
PAGE 4 OF 6
11
11
1.Screw cambolts (A) and insert wood dowels (B) into middle panel .
D

Step 7
Step 8
Step 9
1.Turn the unit around , and
connect back panel using nails (H) .
PAGE 5 OF 6
1.Aach Metal Tubes to assembly using
End Caps , as shown.
Metal Tubes .
2.Aach using End Caps .

6
6
PAGE 6 OF 6
Step 10
1.Aach Knob(C)and Bracket(F)to
plasc Door using knob Screw (G),
as shown.
2.Insert spring inserts into doors.
3.Repeat for second door.
panel and .
Step 11
Step 12
211