Converters.TV 392 User manual

DVI Distributor (2 way)
ID #392
Operation Manual

Introduction
The DVI Distributor (2 way) is 1 -input -2 -output digital DVI distribution
amplifier based on panel link technology
It accepts a DVI signal from a computer and splits up to two identical and
buffered outputs Each of the outputs can run up to 15 meters using a
standard DVI cable
It also supports a wide range of input resolutions (25~165Hz) from VGA
to UXGA
Features
•Supports DVI-D (29 pin) standard connectors
•One DVI-D DDC (Display Data Channel) output
•Auto signal detection for both input / output
•Compliant with DVI 1 0
Connection
1 DVI input port- Connects to the DVI output of your source
equipment
2.Sync LED: Sync led will light up when source signal is connected
3.LED :Power LED will light up when power plug on
4.Power Jack
5.DVI output port 1: Connects to the DVI input of your display 1
6.DVI output port 2: Connects to the DVI input of your display 2

Specifications
Input/Output: 1 input / 2 output
Bandwidth: 26~165MHz
Voltage: AC 100 to 240 DC 5V 2A out
Power Consumption: 6W Max
Operating Temperature Range: 5 to 40 degrees
Operating Humidity Range: 30 to 80% RH
Dimensions(mm): 142(W)x130(D)x38(H)
Weight: approx 1 5kg
Installation

DVI-D Pin Configuration
DVI-Digital (DVI-D): Supports display-only connections
between the host computer and display. This interface
is designed for a 2 or 24-pin connection to enable
single or dual-link mode activation.
DVI-D Recepticle Connector