Remote Control
①Power: Press this key to turn on or set
the device to standby mode.
②Mute: Press this key to mute the audio
output sound press it again to turn back
the audio sound.
③HDMI 1~4: Press these keys to select
HDMI input source equipments from 1~4.
④Vol +/-: Press these Keys to set the
audio output volume up or down.
⑤HDMI: Press this key to set the audio
output volume from HDMI Input signal.
⑥oaxial: Press this key to set the audio
output volume from COAX In signal.
⑦L M *: Press this key to light up/down
the LCM screen.
⑧Analog 7.1: Press this key to set the
audio output volume from analog Audio
Input signal.
⑨Stereo: Press this key to set the audio
output to be 2Ch only from analog Audio
Input signal.
⑩Sound Mode: Press this key to select the
sound mode from Jazz/Music/
Speech/Concert or Movie.
⑪DR : Press this key to turn on the
Dynamic Ratio Compression function
allowing gun shoot sound to be under
controlled and avoid sudden pop sound.
⑫PL-II: Press this key to turn on the Dolby Pro Logic II’s function to allow
2CH sound to output like multi-channel sound.
⑬pqtu & Menu/Enter: Press the Menu key to bring up the OSD menu
and press the up/down/right/left keys to select the OSD selection and
once confirm the selection press Enter key.
⑭Exit: Press this key to exit the OSD selection.
⑮Info: Press this key to bring up the present setting.
