Introduction
The
HDMI to HDMI Distributer Amplifier - 1 in : 4 out
is a high
performance HDMI distribution amplifier.
It allows one HDMI source to connect up to 4 HDMI displays simultaneously.
eatures
1. Solid and durable metal housing with all connectors lined up in one side.
2. Built-in HDC keysets allows each output to work independently when
connecting to a HDMI display.
3. Splits a HDMI source up to 4 outputs at 1080p without signal loss.
4. Supports DVI source and DVI display by using HDMI to/from DVI adapter
cable.
5. Supports a wide range of C and HDTV resolutions, from VGA to UXGA and
480p to 1080p. Maximum resolution bandwidth-165MHz.
6. Can be cascaded for more outputs.
7. Each of the buffered output can run up to 15 meters @ 1600x 1200, or
1080p.
8. Support muti-channel compressed & uncompressed HDMI audio.
9. Full HDC compliant.
10.Enhance function for signal pre-emphasis.
11.Fast handshaking reduces pre-picture blackout time to 5 seconds.
Operating unctions
and Controls
ront Panel
1. Power Switch: ress the switch to power on the unit.
2. Power LED Indicator: The LED will illuminate when the power is
connected.
3. Sync LED: The LED will illuminate when the HDMI source signal is
connected to the input and is detected by the unit.
4. Si nal Enhancement/Indicator: ress the "Enhance" button to turn
on this feature to improve signal quality after long distance
transmission. ress again to turn off. The LED will illuminate when the
signal is enhanced.
